Renault Clio 3 (2005-2014) Torque Spec Settings
M 93, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Renault Clio 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Renault Clio 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 34 | 25 |
|
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
| Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2014
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 34 | 25 |
|
|
|
| Cylinder head | Cylinder head bolts | 40 | 30 | Step 1 |
|
|
| Cylinder head | Cylinder head cover bolts | 2 | 1 | First initial torque |
|
|
| Cylinder head | Cylinder head cover bolts | 6 | 4 | Second initial torque |
|
|
| Cylinder head | Cylinder head cover bolts | 10 | 7 |
|
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Throttle body | Motorised throttle valve mounting bolts | 10 | 7 |
|
|
|
| Sensor | Air flow sensor mounting bolts | 4 | 3 |
|
|
|
| Alternator | Alternator mounting bolts | 25 | 18 |
|
|
|
| Starter | Starter mounting bolts | 62 | 46 |
|
|
|
| Battery | Ignition coil mounting bolts | 7 | 5 |
|
|
|
| Camshaft | Camshaft dephaser solenoid valve bolt | 10 | 7 |
|
|
|
| Crankshaft | Crankshaft pulley bolt | 68 | 50 | Initial torque |
|
|
| Crankshaft | Crankshaft accessories pulley bolt | 30 | 22 | Step 1 |
|
|
| Fuel/Oil cooler | Oil-coolant exchanger bolt | 49 | 36 |
|
|
|
| Belt tensioner/Timing chains | Timing chain tensioner bolts | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | Timing chain tensioner pad bolt | 25 | 18 |
|
|
|
| Belt tensioner/Timing chains | Timing chain guide bolts | 25 | 18 |
|
|
|
| Belt tensioner/Timing chains | Timing cover bolts | 7 | 5 | M5 bolts |
|
|
| Belt tensioner/Timing chains | Timing cover bolts | 25 | 18 | M6 bolts |
|
|
| Belt tensioner/Timing chains | Timing cover bolts | 55 | 41 | M10 bolts |
|
|
| Belt tensioner/Timing chains | Timing cover bolts | 75 | 55 | M12 bolts |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | Mechanism mounting bolts | 15 | 11 | Initial torque |
|
|
| Clutch assembly | Mechanism mounting bolts | 25 | 18 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By M 93 - Own work, Public Domain
Did you find the answer to your specific question?
👍 1 👎 7
