Renault Clio 3 (2005-2014) Torque Spec Settings
Below you'll find the tightening torques for the Renault Clio 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Renault Clio 3
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drain plug | 20 | 15 |
|
||
Spark plugs | Spark plugs | 28 | 21 |
|
||
Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2014
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drain plug | 20 | 15 |
|
||
Oil pan | Bolts mounting engine oil sump on gearbox | 44 | 32 |
|
||
Oil pan | Engine oil sump mounting bolts | 14 | 10 |
|
||
Oil pan | Engine oil sump bolt on multifunction support | 25 | 18 |
|
||
Oil dipstick | Dipstick guide tube bolt | 10 | 7 |
|
||
Oil pump | Oil pump bolts | 25 | 18 |
|
||
Cylinder head | Cylinder head bolts | 20 | 15 |
|
||
Spark plugs | Spark plugs | 28 | 21 |
|
||
Throttle body | Throttle valve bolts | 10 | 7 |
|
||
Sensor | Upstream oxygen sensor | 44 | 32 |
|
||
Alternator | Alternator mounting bolts | 21 | 15 |
|
||
Starter | Starter mounting bolts | 44 | 32 |
|
||
Battery | Coil bolts | 14 | 10 |
|
||
Crankshaft | Crankshaft accessories pulley mounting bolt | 40 | 30 | Step 1 |
|
|
Air conditioning | Air conditioning compressor mounting bolts | 21 | 15 |
|
||
Belt tensioner/Timing chains | Tensioning roller bolts | 30 | 22 |
|
||
Belt tensioner/Timing chains | Timing tension wheel nut | 27 | 20 |
|
||
Belt tensioner/Timing chains | Timing fixed roller bolt | 50 | 37 |
|
||
Belt tensioner/Timing chains | Auto tensioner bolts | 40 | 30 |
|
||
Belt tensioner/Timing chains | Lower timing cover bolts | 12 | 9 |
|
||
Belt tensioner/Timing chains | Lower timing cover bolts | 46 | 34 |
|
||
Belt tensioner/Timing chains | Lower timing cover bolts | 46 | 34 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Clutch pressure plate | Pressure plate mounting bolts | 20 | 15 |
|
||
Flywheel/Flex plate | Flywheel end lifting eye bolts | 10 | 7 |
|
||
Drive/Axle shaft | Driveshaft flange bolts | 21 | 15 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold nuts | 26 | 19 |
|
||
Exhaust manifold | Exhaust manifold stud | 8 | 6 |
|
||
Exhaust manifold | Exhaust flange bolts | 21 | 15 |
|
||
Exhaust manifold | Exhaust manifold upper heat shield bolts | 12 | 9 |
|
||
Exhaust manifold | Exhaust manifold upstream stay bolts | 44 | 32 |
|
||
Exhaust manifold | Exhaust manifold downstream stay bolts | 44 | 32 |
|
||
Exhaust manifold | Exhaust pipe support bolt to Body | 21 | 15 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 1 👎 7