Renault Clio 3 (2005-2014) Torque Spec Settings
M 93, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Renault Clio 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Renault Clio 3
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
| Wheels | Wheel bolts | 105 | 77 | Use wheel impact socket #17. Use a torque wrench. |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2014
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil filter | Oil filter holder bolt | 28 | 21 |
|
|
|
| Cylinder head | Cylinder head bolts | 25 | 18 |
|
|
|
| Alternator | Exchanger inlet air pipe nut to Alternator | 8 | 6 |
|
|
|
| Starter | Starter lower mounting bolt | 44 | 32 |
|
|
|
| Starter | Starter upper bolt | 44 | 32 |
|
|
|
| Camshaft | Camshaft timing sprocket crown bolts | 14 | 10 |
|
|
|
| Fuel/Oil cooler | Oil-coolant heat exchanger nipple | 39 | 29 |
|
|
|
| Intercooler | Intercooler inlet and outlet pipe nut to Alternator | 8 | 6 |
|
|
|
| Intercooler | Air duct clips between intercooler and damper valve | 6 | 4 |
|
|
|
| Belt tensioner/Timing chains | Tensioning roller bolt | 27 | 20 |
|
|
|
| Belt tensioner/Timing chains | Inner timing cover bolts | 9 | 7 |
|
|
|
| Valve cover | Rocker cover bolts | 11 | 8 |
|
|
|
| Fuel system | Injector rail protector cover bolt | 8 | 6 |
|
|
|
| Fuel system | Injector rail protector cover nut | 8 | 6 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Tie rod end | Subframe tie-rod bolt on left-hand side | 105 | 77 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Turbo | Turbocharger oil return pipe bolts on turbocharger | 12 | 9 |
|
|
|
| Catalytic converter | Catalytic pre-converter to Turbocharger studs | 7 | 5 |
|
|
|
| Catalytic converter | Catalytic pre-converter to Turbocharger nuts | 26 | 19 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By M 93 - Own work, Public Domain
Did you find the answer to your specific question?
👍 1 👎 7
