Honda Civic (8th Gen.) (2005-2010) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Honda Civic (8th Gen.) in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Civic (8th Gen.)
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Water pump | Water pump pulley bolts | 14 | 10 |
|
|
|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 49 | 36 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2010
- Generation: 8
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan bolts | 18 | 13 |
|
|
|
| Oil pan | Baffle plate bolts | 10 | 7 | Bolts 6x1.0mm |
|
|
| Oil pump | Oil screen bolts | 12 | 9 | Bolts 6x1.0mm |
|
|
| Piston rods | Connecting rod bolts | 20 | 15 |
|
|
|
| Intake manifold | Intake manifold bolts and nuts | 24 | 18 | Bolts and nuts 8x1.25mm |
|
|
| Intake manifold | Intake manifold bracket bolt | 10 | 7 | Bolt 6x1.0mm |
|
|
| Intake manifold | Intake manifold bracket bolt | 24 | 18 | Bolt 8x1.25mm |
|
|
| Throttle body | Throttle body bolts | 24 | 18 | Bolts 8x1.25mm |
|
|
| Engine block | Engine block drain bolts | 34 | 25 | Bolts 20x1.5mm |
|
|
| Engine block | Engine block drain bolts | 54 | 40 | Bolts 24x1.5mm |
|
|
| Engine block | Engine block drain bolt | 83 | 61 | Bolt 28x1.5mm |
|
|
| Engine block | Engine block drain bolt | 137 | 101 | Bolt 36x1.5mm |
|
|
| Sensor | Engine coolant temperature (ECT) sensor 2 | 12 | 9 |
|
|
|
| Sensor | Manifold absolute pressure (MAP) sensor bolt | 3 | 2 |
|
|
|
| Alternator | Alternator bolts | 24 | 18 |
|
|
|
| Starter | Starter upper mounting bolt | 44 | 32 | Bolt 10x1.25mm |
|
|
| Starter | Starter upper mounting bolt | 44 | 32 | Bolt 10x1.25mm |
|
|
| Starter | Starter lower mounting bolt | 44 | 32 | Bolt 10x1.25mm |
|
|
| Starter | Starter lower mounting bolt | 44 | 32 | Bolt 10x1.25mm |
|
|
| Starter | Starter cable nut | 9 | 7 | Nut 8x1.25mm |
|
|
| Starter | Starter cable nut | 9 | 7 | Nut 8x1.25mm |
|
|
| Battery | Ignition coils | 12 | 9 |
|
|
|
| Crankshaft | Bearing cap bolts | 25 | 18 |
|
|
|
| Crankshaft | Bearing cap bolts | 24 | 18 | Bolts 8mm |
|
|
| Crankshaft | Crankshaft position (CKP) pulse plate to Crankshaft bolts | 9 | 7 | Bolts 6x1.0mm |
|
|
| Water pump | Water pump bolts | 12 | 9 |
|
|
|
| Water pump | Water pump pulley bolts | 14 | 10 |
|
|
|
| Heater core | Heater outlet bolts | 10 | 7 |
|
|
|
| Heater core | Heater hose clamp bracket bolt | 10 | 7 | Bolt 6x1.0mm |
|
|
| Radiator | Radiator upper brackets bolts | 10 | 7 |
|
|
|
| Radiator | Radiator cap base mounting bolts | 10 | 7 |
|
|
|
| Radiator | Upper radiator hose bolt | 24 | 18 |
|
|
|
| Radiator | Lower radiator hose bolts and nuts | 22 | 16 |
|
|
|
| Radiator | Radiator fan nut | 6 | 4 | DENSO |
|
|
| Radiator | Radiator fan nut | 4 | 3 | CoPAR |
|
|
| Radiator | Radiator fan shroud bolts | 7 | 5 |
|
|
|
| Radiator | Thermostat housing bolts | 24 | 18 |
|
|
|
| Radiator | Thermostat cover bolts | 10 | 7 |
|
|
|
| Air conditioning | A/C condenser fan shroud assembly bolts | 7 | 5 |
|
|
|
| Belt tensioner/Timing chains | Drive belt auto tensioner bolt | 24 | 18 | Bolt 8x1.25mm |
|
|
| Belt tensioner/Timing chains | Drive belt auto tensioner bolt | 54 | 40 | Bolt 10x1.25mm |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Torque converter | Clutch cover/Torque converter cover bolts | 12 | 9 | Bolts 6x1.0mm |
|
|
| Transfer | Shift cable cover bolts | 12 | 9 | Bolts 6x1.0mm |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| EGR | EGR valve nuts | 22 | 16 |
|
|
|
| EGR | EGR valve nuts | 24 | 18 |
|
|
|
| EGR | EGR pipe to Water passage nuts | 22 | 16 |
|
|
|
| EGR | EGR pipe to TWC bolts | 22 | 16 |
|
|
|
| EGR | Exhaust Gas Recirculation (EGR) joint bolt | 10 | 7 | Bolt 6x1.0mm |
|
|
| Muffler | Muffler bolt | 22 | 16 | Bolt 8x1.25mm |
|
|
| Catalytic converter | Catalytic converter cover bolts | 10 | 7 |
|
|
|
| Catalytic converter | TWC bolts and nuts | 31 | 23 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By SsmIntrigue - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 2 👎 9
