Honda Civic (8th Gen.) (2005-2010) Torque Spec Settings
Below you'll find the tightening torques for the Honda Civic (8th Gen.) in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Civic (8th Gen.)
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 39 | 29 |
|
||
Transmission fluid pan | Drain plug | 39 | 29 |
|
||
Transmission fluid pan | Drain plug | 49 | 36 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2010
- Generation: 8
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Engine mounts | Front engine mount bracket bolts | 74 | 55 | Bolts 12x1.25mm |
|
|
Engine mounts | Front mount mounting bolt | 64 | 47 | Bolt 12x1.25mm |
|
|
Sensor | Output shaft (countershaft) speed sensor bolt | 12 | 9 | Bolt 6x1.0mm |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Differential carrier to Final driven gear bolts | 121 | 89 | Bolts 11x1.0mm |
|
|
Clutch assembly | Countershaft bolt | 118 | 87 |
|
||
Clutch assembly | Clutch housing bolt | 44 | 32 | Bolt 20mm |
|
|
Clutch assembly | Clutch cover bolts | 12 | 9 | Bolts 6x1.0mm |
|
|
Transmission fluid pan | Drain plug | 39 | 29 |
|
||
Transmission fluid pan | Filler plug | 44 | 32 |
|
||
Transmission mount/case | Upper transmission mounting bolts | 64 | 47 | Bolts 12x1.25mm |
|
|
Transmission mount/case | Transmission mounting bolts | 64 | 47 | Bolts 12x1.25mm |
|
|
Transmission mount/case | Transmission mounting bracket bolts | 74 | 55 | Bolts 12x1.25mm |
|
|
Transmission mount/case | Transmission housing to Clutch housing flange bolts | 27 | 20 | Bolts 8x1.25mm |
|
|
Transmission mount/case | Transmission housing flange bolt | 44 | 32 | Bolt 10mm |
|
|
Transmission mount/case | Transmission housing sealing cap | 34 | 25 |
|
||
Transmission mount/case | Detent bolt | 22 | 16 |
|
||
Transfer | Shift lever knob locknut | 9 | 7 | Nut 10x1.25mm |
|
|
Transfer | Shift lever housing bolts | 22 | 16 | Bolts 8x1.25mm |
|
|
Transfer | Shift arm bolt | 31 | 23 |
|
||
Transfer | Shift cables bolts and nuts | 10 | 7 | Bolts and nuts 6x1.0mm |
|
|
Transfer | Shift cable bracket bolts | 27 | 20 | Bolts 8x1.25mm |
|
|
Drive/Axle shaft | Intermediate shaft bearing support flange bolts | 39 | 29 | SI model, Bolts 10x1.25mm |
|
|
Drive/Axle shaft | Intermediate shaft bearing support shoulder bolts | 39 | 29 | SI model, Bolts 10x1.25mm |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Radius arm | Upper torque rod mounting bolt | 64 | 47 | Bolt 12x1.25mm |
|
|
Radius arm | Lower torque rod mounting bolt | 88 | 65 | Bolt 14x1.5mm |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 2 👎 9