Honda Civic (8th Gen.) (2005-2010) Torque Spec Settings
Below you'll find the tightening torques for the Honda Civic (8th Gen.) in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Honda Civic (8th Gen.)
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 39 | 29 |
|
||
Transmission fluid pan | Drain plug | 39 | 29 |
|
||
Transmission fluid pan | Drain plug | 49 | 36 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2010
- Generation: 8
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Engine mounts | Lower engine mounting bolt | 64 | 47 | Bolt 12x1.25mm |
|
|
Sensor | Front impact sensors | 10 | 7 |
|
||
Sensor | Side impact sensors | 10 | 7 |
|
||
Sensor | Rear impact sensors | 10 | 7 |
|
||
Battery | Ignition coils | 12 | 9 |
|
||
Battery | Ignition coils | 12 | 9 |
|
||
Battery | Ignition coil cover bolts and nuts | 10 | 7 | Bolts and nuts 6x1.0mm |
|
|
Heater core | Heater unit mounting nut | 12 | 9 |
|
||
Heater core | Blower-Heater unit mounting bolts | 10 | 7 | Bolts 6x1.0mm |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transfer | Shift cable bracket bolts | 10 | 7 | Bolts 6x1.0mm |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Tie rod ends to Steering knuckles nut | 54 | 40 | Nut 12x1.25mm |
|
|
Steering rack | Steering gearbox mounting bracket bolts | 38 | 28 | Bolts 10x1.25mm |
|
|
Steering rack | Steering gearbox harness clamp bolts | 10 | 7 | Bolts 6x1.0mm |
|
|
Steering rack | Steering rack cylinder end | 93 | 69 |
|
||
Steering rack | Rack end joint | 88 | 65 |
|
||
Steering rack | Steering joint bolt | 28 | 21 | Bolt 8x1.25mm |
|
|
Steering rack | Rack guide screw | 25 | 18 | Hydraulic power steering type |
|
|
Steering rack | Rack guide screw | 6 | 4 | Retighten, Hydraulic power steering type |
|
|
Steering rack | Rack guide screw | 25 | 18 | EPS type |
|
|
Steering rack | Rack guide screw | 4 | 3 | Retighten, EPS type |
|
|
Steering rack | Rack guide screw locknut | 25 | 18 | Hydraulic power steering type |
|
|
Steering rack | Rack guide screw locknut | 44 | 32 | EPS type |
|
|
Steering column | Steering column bolts | 22 | 16 | Bolts 8x1.25mm |
|
|
Steering column | Steering column nuts | 13 | 10 | Nuts 8x1.25mm |
|
|
Steering wheel | Steering wheel bolt | 39 | 29 |
|
||
Power steering | Pump mounting bolts | 22 | 16 |
|
||
Power steering | Pulley nut | 64 | 47 |
|
||
Power steering | Pump housing cap | 29 | 21 |
|
||
Power steering | Pressure control valve cap | 49 | 36 |
|
||
Power steering | Pump cover bolts | 20 | 15 | Bolts 8x1.25mm |
|
|
Power steering | Inlet joint bolt | 11 | 8 | Bolt 6x1.0mm |
|
|
Power steering | Inlet line clamp bolt | 10 | 7 | Bolt 6x1.0mm |
|
|
Power steering | Return line clamp bolt | 10 | 7 | Bolt 6x1.0mm |
|
|
Power steering | Pump outlet hose clamp bolt | 10 | 7 | Bolt 6x1.0mm |
|
|
Power steering | Pump outlet hose to P/S joint adapter bolts | 11 | 8 | Bolts 6x1.0mm |
|
|
Power steering | P/S pressure gauge to P/S joint adapter | 11 | 8 | Bolts 6x1.0mm |
|
|
Power steering | Power steering pressure switch | 12 | 9 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
EGR | EGR valve nuts | 22 | 16 |
|
||
EGR | EGR pipe to Water passage nuts | 22 | 16 |
|
||
EGR | EGR pipe to TWC bolts | 22 | 16 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Radius arm | Upper torque rod mounting bolt | 64 | 47 | Bolts 12x1.25mm |
|
|
Radius arm | Lower torque rod bracket bolts | 64 | 47 | Bolts 12x1.25mm |
|
|
Radius arm | Lower torque rod bracket bolt | 88 | 65 | Bolt 14x1.5mm |
|
|
Ball joint | Lower arm to Lower ball joint front flange nut | 59 | 44 | Nut 12x1.25mm |
|
|
Ball joint | Lower arm to Lower ball joint rear flange nut | 59 | 44 | Nut 12x1.25mm |
|
|
Ball joint | Lower arm to Lower ball joint flange bolt | 59 | 44 | Bolt 12x1.25mm |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 2 👎 9