Volkswagen Scirocco 3 (2008-2017) Torque Spec Settings
Below you'll find the tightening torques for the Volkswagen Scirocco 3 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Volkswagen Scirocco 3
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2008 - 2017
- Generation: 3
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil sump at gearbox | 40 | 30 |
|
||
Oil pan | Oil sump on the engine block | 15 | 11 |
|
||
Cylinder head | Cylinder head screws | 30 | 22 | First Stage |
|
|
Cylinder head | Cylinder head screws | 50 | 37 | Second Stage |
|
|
Alternator | Alternator | 25 | 18 |
|
||
Alternator | Generator Bracket, M10 x 30 screws | 40 | 30 | First Stage |
|
|
Camshaft | Camshaft timing gear | 100 | 74 | Central screw |
|
|
Camshaft | Camshaft timing gear | 20 | 15 | Wheel, First stage |
|
|
Camshaft | Crankshaft central screws | 180 | 133 | First stage |
|
|
Fuel/Oil cooler | Oil cooler | 25 | 18 |
|
||
Air conditioning | Air-conditioning compressor | 45 | 33 |
|
||
Air conditioning | Air-conditioning compressor bracket, M10 x 30 screws | 40 | 30 | First Stage |
|
|
Belt tensioner/Timing chains | Auxiliary Drive belt tensioner | 20 | 15 | With automatic tensioner |
|
|
Valve cover | Valve Cover | 10 | 7 | Tigthen gradually cross-wise |
|
|
Fuel system | Fuel Distributing Pipe | 22 | 16 |
|
||
Fuel system | Injection Nozzle (Injector) | 10 | 7 | Retaining Clamp |
|
|
Fuel system | Injection Nozzle (Injector) | 5 | 4 | Crews |
|
|
Exhaust manifold | Exhaust manifold | 20 | 15 |
|
||
Exhaust manifold | Exhaust manifold heat shields | 20 | 15 |
|
||
Turbo | Turbocharger oil feed line | 10 | 7 | Support Screws |
|
|
Turbo | Turbocharger oil feed line | 22 | 16 | Union nuts |
|
|
Turbo | Turbocharger oil feed line | 22 | 16 | Union Nuts at turbocharger |
|
|
Turbo | Turbocharger oil return line | 15 | 11 | At the turbocharger |
|
|
Turbo | Turbocharger oil return line | 60 | 44 | Banjo bolts on the engine block |
|
|
Turbo | Turbocharger oil return line | 20 | 15 | Support on the turbocharger |
|
|
EGR | Exhaust recirculation pipe | 20 | 15 | Screws |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 1