Toyota Highlander XU70 (2019-on) Torque Spec Settings
By MercurySable99 - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Toyota Highlander XU70 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Highlander XU70
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 36.6 | 27 |
|
|
|
| Spark plugs | Spark plugs | 19 | 14 |
|
|
|
| Intake manifold | Intake manifold | 17.6 | 13 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2019 - present
- Generation: 4
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan | 12.2 | 9 |
|
|
|
| Oil pan | Drain plug | 36.6 | 27 |
|
|
|
| Oil pump | Oil pump (A bolts) | 20.3 | 15 |
|
|
|
| Oil pump | Oil pump (B bolts) | 42 | 31 |
|
|
|
| Oil pump | Oil pump cover | 10.8 | 8 |
|
|
|
| Oil pump | Oil pump pickup tube | 13.6 | 10 |
|
|
|
| Cylinder head | Cylinder head | 33.9 | 25 | Add 90°. Then add another 90°. |
|
|
| Spark plugs | Spark plugs | 19 | 14 |
|
|
|
| Battery | COP's (Ignition coil packs) | 6.8 | 5 |
|
|
|
| Throttle body | Throttle body | 9.5 | 7 |
|
|
|
| Fuel system | Fuel rail | 10.8 | 8 |
|
|
|
| Fuel system | Fuel inlet pipe | 19 | 14 |
|
|
|
| Intake manifold | Intake manifold | 17.6 | 13 |
|
|
|
| Engine mounts | Motor mount (Engine side) | 80 | 59 |
|
|
|
| Engine mounts | Motor mount (Frame side) | 47.5 | 35 |
|
|
|
| Camshaft | Camshaft sprocket bolt | 109.8 | 81 |
|
|
|
| Camshaft | Camshaft bearing caps | 16.3 | 12 |
|
|
|
| Crankshaft | Crankshaft position sensor | 13.6 | 10 |
|
|
|
| Crankshaft | Crankshaft pulley | 288.8 | 213 |
|
|
|
| Piston rods | Main cap bolts | 61 | 45 |
|
|
|
| Piston rods | Connecting rod bolts | 24.4 | 18 |
|
|
|
| Valve cover | Valve cover | 12.2 | 9 |
|
|
|
| Water pump | Water pump | 19 | 14 |
|
|
|
| Water pump | Water pulley | 19 | 14 |
|
|
|
| Belt tensioner/Timing chains | Timing cover | 10.8 | 8 |
|
|
|
| Belt tensioner/Timing chains | Timing belt tensioner | 27.1 | 20 |
|
|
|
| Belt tensioner/Timing chains | Timing idler | 27.1 | 20 |
|
|
|
| Belt tensioner/Timing chains | Belt tensioner | 24.4 | 18 |
|
|
|
| Belt tensioner/Timing chains | Belt idler pulley | 40.7 | 30 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Power steering pump | Power steering to Head | 19 | 14 |
|
|
|
| Power steering pump | Power steering to Bracket | 40.7 | 30 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold | 40.7 | 30 |
|
|
|
| Exhaust manifold | Exhaust manifold to Pipe | 33.9 | 25 |
|
|
|
| EGR | Exhaust EGR pipe | 19 | 14 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Kevauto - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 0 👎 3
