Toyota Highlander XU20 (2000-2007) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Highlander XU20 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Highlander XU20
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Wheel nut | 103 | 76 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2000 - 2007
- Generation: 1
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil pan drain plug to Oil pan | 25 | 18 |
|
||
Oil pan | Oil pan drain plug to Oil pan sub-assembly No.2 | 45 | 33 |
|
||
Oil pan | Oil pan to Stiffening crankcase assembly | 9 | 7 |
|
||
Oil pan | Oil pan sub-assembly to Cylinder block | 8 | 6 | 10mm head |
|
|
Oil pan | Oil pan sub-assembly to Cylinder block | 20 | 15 | 12mm head |
|
|
Oil pan | Oil pan sub-assembly No.2 to Oil pan sub-assembly | 8 | 6 |
|
||
Oil pan | Oil pan baffle plate to Oil pan sub-assembly | 8 | 6 |
|
||
Oil filter | Oil filter to Cylinder block | 18 | 13 |
|
||
Oil filter | Oil filter union to Cylinder block assembly | 30 | 22 |
|
||
Oil filter | Oil strainer sub-assembly to Oil pan sub-assembly | 8 | 6 |
|
||
Oil pressure switch | Oil pressure switch to Cylinder head | 15 | 11 |
|
||
Oil pressure switch | Oil pressure switch to Cylinder block | 15 | 11 |
|
||
Oil dipstick | Oil level gauge guide to Water by-pass pipe No.1 | 9 | 7 |
|
||
Oil dipstick | Oil level gauge guide to Cylinder block assembly | 8 | 6 |
|
||
Oil pump | Oil pump to Cylinder block | 19 | 14 |
|
||
Oil pump | Oil pump assembly to Cylinder block assembly bolt | 8 | 6 | Bolt A |
|
|
Oil pump | Oil pump assembly to Cylinder block assembly bolt | 20 | 15 | Bolt B |
|
|
Oil pump | Oil pump assembly to Cylinder block assembly bolt | 43 | 32 | Bolt C |
|
|
Oil pump | Oil pump drive sprocket to Oil pump | 30 | 22 |
|
||
Oil pump | Timing belt plate to Oil pump assembly | 8 | 6 |
|
||
Oil pump | Timing belt tensioner to Oil pump assembly | 27 | 20 |
|
||
Oil pump | Oil pump to Oil pump cover | 9 | 7 |
|
||
Oil pump | Oil pump cover to Oil pump housing | 10 | 7 |
|
||
Oil pump | Oil pump to Oil pump strainer | 9 | 7 |
|
||
Oil pump | Oil pump rotor set to Oil pump assembly | 10 | 7 |
|
||
Oil pump | Oil pump relief valve to Oil pump housing | 49 | 36 |
|
||
Piston rods | Connecting rod cap to Connecting rod | 25 | 18 | Step 1 |
|
|
Piston rods | Connecting rod cap to Connecting rod | 25 | 18 | Step 1 |
|
|
Cylinder head | Cylinder head to Cylinder block | 79 | 58 | Step 1 |
|
|
Cylinder head | Cylinder head assembly to Cylinder block assembly | 54 | 40 | 12 pointed head, Step 1 |
|
|
Cylinder head | Cylinder head assembly to Cylinder block assembly | 19 | 14 | Recessed head |
|
|
Cylinder head | Cylinder head cover to Cylinder head bolt | 11 | 8 | Bolt A |
|
|
Cylinder head | Cylinder head cover to Cylinder head bolt | 14 | 10 | Bolt B |
|
|
Cylinder head | Cylinder head cover to Cylinder head nut | 11 | 8 |
|
||
Cylinder head | Cylinder head cover to Cylinder head assembly | 8 | 6 |
|
||
Cylinder head | Cylinder head cover rear to Cylinder head assembly | 10 | 7 |
|
||
Cylinder head | V-bank cover sub-assembly to Cylinder head cover sub-assembly LH | 8 | 6 |
|
||
Cylinder head | Ventilation valve to Cylinder head cover | 19 | 14 |
|
||
Spark plugs | Spark plug to Cylinder head | 19 | 14 |
|
||
Spark plugs | Spark plug to Cylinder head assembly | 25 | 18 |
|
||
Intake manifold | Intake manifold to Cylinder head sub-assembly | 30 | 22 |
|
||
Intake manifold | Intake manifold to Cylinder head | 15 | 11 |
|
||
Intake manifold | Intake manifold to Cylinder head sub-assembly | 15 | 11 |
|
||
Intake manifold | Intake manifold sub-assembly to Cylinder head assembly | 30 | 22 |
|
||
Intake manifold | Intake manifold to Cylinder head LH | 15 | 11 |
|
||
Intake manifold | Intake air surge tank to Intake manifold | 28 | 21 |
|
||
Intake manifold | Ground cable to Intake manifold | 8 | 6 |
|
||
Throttle body | Throttle body assembly to Intake manifold | 30 | 22 |
|
||
Throttle body | Throttle body assembly to Intake air connector | 11 | 8 |
|
||
Engine block | Drive shaft bearing bracket to Cylinder block | 64 | 47 |
|
||
Engine block | Water inlet to Cylinder block | 9 | 7 |
|
||
Engine block | Water inlet housing to Cylinder block | 8 | 6 |
|
||
Engine block | Water seal plate to Cylinder block | 18 | 13 |
|
||
Engine block | Balance shaft housing to Stiffening crankcase assembly | 22 | 16 | Step 1 |
|
|
Engine block | Stiffening crankcase assembly to Cylinder block | 33 | 24 |
|
||
Engine block | W/head taper screw plug No.1 to Cylinder block | 26 | 19 |
|
||
Engine block | Cylinder block w/head straight screw No.1 plug to Cylinder block | 30 | 22 |
|
||
Engine block | Cylinder block w/head straight screw No.2 plug to Cylinder block | 50 | 37 |
|
||
Engine block | Cylinder block w/head straight screw No.3 plug to Cylinder block | 30 | 22 |
|
||
Engine block | Oil control valve filter to Cylinder block | 30 | 22 |
|
||
Engine block | Oil control valve filter to Cylinder head assembly | 45 | 33 |
|
||
Engine block | Cylinder block water drain cock to Stiffening crankcase assembly | 25 | 18 |
|
||
Engine block | Cylinder block water drain cock sub-assembly to Cylinder block | 39 | 29 |
|
||
Engine block | Engine rear oil seal retainer to Cylinder block | 8 | 6 |
|
||
Engine mounts | Engine mounting bracket RH to Cylinder head | 54 | 40 |
|
||
Engine mounts | Engine mounting bracket to Cylinder block bolt | 34 | 25 | Bolt A |
|
|
Engine mounts | Engine mounting bracket to Cylinder block bolt | 64 | 47 | Bolt B |
|
|
Engine mounts | Engine mounting bracket No.2 RH to Timing chain cover | 20 | 15 |
|
||
Engine mounts | Engine mounting bracket RR to Transfer bolt | 34 | 25 | Bolt A |
|
|
Engine mounts | Engine mounting bracket RR to Cylinder block | 64 | 47 | Bolt B |
|
|
Engine mounts | Engine mounting bracket RR to Cylinder block | 64 | 47 |
|
||
Engine mounts | Engine mounting bracket RR to Front frame assembly | 64 | 47 |
|
||
Engine mounts | Engine mounting insulator LH to Automatic transaxle assembly | 95 | 70 |
|
||
Engine mounts | Engine mounting insulator LH to Automatic transaxle assembly | 95 | 70 |
|
||
Engine mounts | Engine mounting insulator RH to Engine mounting bracket RH | 95 | 70 |
|
||
Engine mounts | Engine mounting insulator RH to Engine mounting bracket | 95 | 70 |
|
||
Engine mounts | Engine mounting insulator FR to Engine mounting bracket FR | 87 | 64 |
|
||
Engine mounts | Engine mounting insulator FR to Automatic transaxle assembly | 87 | 64 |
|
||
Engine mounts | Engine mounting insulator RR to Engine mounting bracket RR | 75 | 55 |
|
||
Engine mounts | Engine mounting insulator RR to Transverse engine mounting bracket | 75 | 55 |
|
||
Engine mounts | Engine mounting stay No.2 RH to Engine mounting control rod bracket No.2 | 64 | 47 |
|
||
Engine mounts | Engine mounting stay No.2 RH to Engine mounting bracket | 64 | 47 |
|
||
Sensor | Knock sensor to Cylinder block sub-assembly | 20 | 15 |
|
||
Sensor | Knock sensor to Cylinder block sub-assembly | 20 | 15 |
|
||
Sensor | Speed sensor front LH to Steering knuckle | 8 | 6 |
|
||
Sensor | Speed sensor front RH to Steering knuckle | 8 | 6 |
|
||
Sensor | Crank position sensor to Timing chain cover | 9 | 7 |
|
||
Sensor | Crank position sensor to Oil pump assembly | 8 | 6 |
|
||
Sensor | Camshaft position sensor to Cylinder head | 9 | 7 |
|
||
Sensor | VVT sensor No.1 to Cylinder head assembly | 8 | 6 |
|
||
Sensor | Heated oxygen sensor (Bank 1, sensor 2) to Exhaust pipe assembly front | 44 | 32 |
|
||
Sensor | Heated oxygen sensor (Bank 1, sensor 2) to Exhaust pipe sub-assembly front No.3 | 44 | 32 |
|
||
Sensor | Heated oxygen sensor (Bank 2, sensor 2) to Exhaust pipe assembly front | 44 | 32 |
|
||
Alternator | Generator assembly bracket bolt | 52 | 38 | Bolt A |
|
|
Alternator | Generator assembly bracket bolt | 21 | 15 | Bolt B |
|
|
Alternator | Generator assembly to Generator bracket | 58 | 43 |
|
||
Alternator | Generator bracket No.1 to Cylinder block | 58 | 43 |
|
||
Alternator | Generator bracket No.2 to Transverse engine mounting bracket | 28 | 21 |
|
||
Alternator | Generator belt adjusting bar to Cylinder block nut | 43 | 32 | Nut A |
|
|
Alternator | Generator belt adjusting bar to Cylinder block bolt | 18 | 13 | Bolt B |
|
|
Alternator | Generator belt adjusting bar to Cylinder block bolt | 8 | 6 | Bolt C |
|
|
Starter | Starter assembly to Automatic transaxle assembly | 39 | 29 |
|
||
Battery | Battery clamp sub-assembly to Body | 6 | 4 |
|
||
Battery | Ignition coil assembly to Cylinder head | 9 | 7 |
|
||
Battery | Ignition coil assembly to Cylinder head cover | 8 | 6 |
|
||
Camshaft | Camshaft timing gear assembly to Camshaft | 54 | 40 |
|
||
Camshaft | Camshaft timing gear or sprocket to Camshaft | 54 | 40 |
|
||
Camshaft | Camshaft timing gear assembly (VVT-i) to Camshaft | 150 | 111 |
|
||
Camshaft | Camshaft timing pulley to Camshaft | 125 | 92 |
|
||
Camshaft | Camshaft sub-gear to Main gear | 5 | 4 |
|
||
Camshaft | Camshaft bearing cap No.1 to Cylinder head | 30 | 22 |
|
||
Camshaft | Camshaft bearing cap No.2 to Cylinder head | 30 | 22 |
|
||
Camshaft | Camshaft bearing cap No.3 to Cylinder head | 9 | 7 |
|
||
Camshaft | Camshaft bearing cap to Cylinder head assembly | 16 | 12 |
|
||
Camshaft | Camshaft timing oil control valve to Cylinder head | 9 | 7 |
|
||
Camshaft | Camshaft timing oil control valve assembly to Cylinder head assembly | 8 | 6 |
|
||
Crankshaft | Crankshaft pulley to Crankshaft | 180 | 133 |
|
||
Crankshaft | Crankshaft pulley to Crankshaft | 220 | 162 |
|
||
Crankshaft | Crankshaft bearing cap to Cylinder block | 20 | 15 | Step 1 |
|
|
Crankshaft | Crankshaft bearing cap to Cylinder block | 40 | 30 | Step 2 |
|
|
Crankshaft | Crankshaft bearing cap to Cylinder block assembly | 22 | 16 | 12 pointed head, Step 1 |
|
|
Crankshaft | Crankshaft bearing cap to Cylinder block assembly | 27 | 20 | 6 pointed head |
|
|
Crankshaft | Timing chain guide to Crankshaft bearing cap No.1 | 9 | 7 |
|
||
Crankshaft | Drive plate and ring gear to Crankshaft | 98 | 72 |
|
||
Crankshaft | Drive plate and ring gear sub-assembly to Crankshaft | 83 | 61 |
|
||
Crankshaft | Chain vibration damper No.1 to Cylinder head | 9 | 7 |
|
||
Crankshaft | Chain vibration damper No.1 to Cylinder block | 9 | 7 |
|
||
Water pump | Water pump assembly to Cylinder block | 9 | 7 |
|
||
Water pump | Water pump assembly to Cylinder block assembly | 8 | 6 |
|
||
Water pump | Water pump pulley to Water pump assembly | 26 | 19 |
|
||
Fuel/Oil cooler | Oil cooler to Union | 79 | 58 |
|
||
Fuel/Oil cooler | Oil cooler to Cylinder block | 9 | 7 |
|
||
Coolant expansion tank | Surge tank stay No.1 to Cylinder head | 20 | 15 |
|
||
Coolant expansion tank | Surge tank stay No.2 to Cylinder head | 20 | 15 |
|
||
Coolant expansion tank | Surge tank stay No.1 to Intake air surge tank | 20 | 15 |
|
||
Coolant expansion tank | Surge tank stay No.2 to Intake air surge tank | 20 | 15 |
|
||
Radiator | Water outlet to Cylinder head LH | 15 | 11 |
|
||
Radiator | Water outlet to Cylinder head sub-assembly | 15 | 11 |
|
||
Air conditioning | Compressor and magnetic clutch to Bracket | 25 | 18 |
|
||
Air conditioning | Compressor and magnetic clutch to Compressor mounting bracket No.1 bolt | 25 | 18 |
|
||
Air conditioning | Compressor and magnetic clutch to Compressor mounting bracket No.1 nut | 26 | 19 |
|
||
Air conditioning | Compressor mounting bracket No.1 to Cylinder block | 25 | 18 |
|
||
Belt tensioner/Timing chains | V-ribbed belt tensioner assembly to Timing chain cover | 60 | 44 |
|
||
Belt tensioner/Timing chains | Timing belt idler bracket to Cylinder block assembly | 28 | 21 |
|
||
Belt tensioner/Timing chains | Timing belt idler sub-assembly No.1 to Cylinder block assembly | 34 | 25 |
|
||
Belt tensioner/Timing chains | Timing belt idler sub-assembly No.2 to Timing belt idler bracket | 43 | 32 |
|
||
Belt tensioner/Timing chains | Timing belt No.1 cover to Oil pump assembly | 9 | 7 |
|
||
Belt tensioner/Timing chains | Timing belt No.2 cover to Timing belt No.3 cover | 9 | 7 |
|
||
Belt tensioner/Timing chains | Timing belt No.3 cover to Cylinder head assembly | 9 | 7 |
|
||
Belt tensioner/Timing chains | Chain tensioner assembly to Timing chain cover | 9 | 7 |
|
||
Belt tensioner/Timing chains | Chain tensioner plate to Stiffening crankcase assembly | 12 | 9 |
|
||
Belt tensioner/Timing chains | Chain tensioner slipper to Cylinder block | 19 | 14 |
|
||
Belt tensioner/Timing chains | Timing chain cover bolt | 9 | 7 | Bolt A |
|
|
Belt tensioner/Timing chains | Timing chain cover bolt | 21 | 15 | Bolt B |
|
|
Belt tensioner/Timing chains | Timing chain cover bolt | 43 | 32 | Bolt C |
|
|
Belt tensioner/Timing chains | Timing chain cover nut | 9 | 7 |
|
||
PCM | ECM to Instrument panel reinforcement | 6 | 4 |
|
||
PCM | ECM to Instrument panel reinforcement | 6 | 4 |
|
||
PCM | ECM to Blower assembly | 6 | 4 |
|
||
PCM | ECM to Blower assembly | 6 | 4 |
|
||
Fuel system | Fuel delivery pipe to Cylinder head | 20 | 15 |
|
||
Fuel system | Fuel delivery pipe No.2 to Intake manifold | 10 | 7 |
|
||
Fuel system | Fuel delivery pipe sub-assembly to Intake manifold | 10 | 7 |
|
||
Fuel system | Fuel pipe No.2 union bolt to Fuel delivery pipe No.2 | 33 | 24 |
|
||
Fuel system | Fuel pipe sub-assembly No.1 to Intake manifold | 20 | 15 |
|
||
Fuel system | Fuel pressure pulsation damper assembly to Fuel delivery pipe sub-assembly | 33 | 24 |
|
||
Fuel system | Fuel tank band sub-assembly No.1 LH to Body | 39 | 29 |
|
||
Fuel system | Fuel tank band sub-assembly No.1 LH to Body | 39 | 29 |
|
||
Fuel system | Fuel tank band sub-assembly No.1 RH to Body | 39 | 29 |
|
||
Fuel system | Fuel tank band sub-assembly No.1 RH to Body | 39 | 29 |
|
||
Fuel system | Fuel tank protector to Fuel tank assembly | 6 | 4 |
|
||
Fuel system | Fuel tank protector lower center to Fuel tank assembly | 6 | 4 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Ring gear mount set bolt | 78 | 58 |
|
||
Wheel hub assembly | Front hub nut | 103 | 76 |
|
||
Wheel hub assembly | Front axle hub nut to Front drive shaft | 294 | 217 |
|
||
Flywheel/Flex plate | Flywheel housing under cover to Automatic transaxle assembly | 8 | 6 |
|
||
Torque converter | Drive plate and ring gear to Torque converter | 41 | 30 |
|
||
Transfer | Transfer fill plug | 49 | 36 |
|
||
Transfer | Transfer drain plug to Transfer case | 49 | 36 |
|
||
Transfer | Transfer gear nut | 277 | 204 | For use with SST, STD |
|
|
Transfer | Transfer gear nut | 378 | 279 | For use with SST, Max. |
|
|
Transfer | Transfer case to Transfer RH bearing retainer sub-assembly | 28 | 21 |
|
||
Transfer | Transfer case to Transfer extension housing | 26 | 19 |
|
||
Transfer | Transfer case to Transfer and transaxle setting stud bolt | 39 | 29 |
|
||
Transfer | Transfer extension housing to Transfer dynamic damper | 26 | 19 |
|
||
Transfer | Transfer case cover No.1 to Transfer case breather oil deflector | 7 | 5 |
|
||
Transfer | Transfer case to Transfer case cover No.1 | 20 | 15 |
|
||
Transfer | Transaxle assembly to Transfer assembly | 69 | 51 |
|
||
Transfer | Transfer case No.1 plug to Transfer case | 49 | 36 |
|
||
Transfer | Transfer case No.2 plug to Transfer case | 49 | 36 |
|
||
Drive/Axle shaft | Front axle hub LH nut to Front drive shaft | 294 | 217 |
|
||
Drive/Axle shaft | Propeller shaft to Intermediate shaft | 74 | 55 |
|
||
Drive/Axle shaft | Front propeller shaft to Intermediate shaft | 74 | 55 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Tie rod assembly lock nut | 74 | 55 |
|
||
Tie rod end | Tie rod assembly to Steering knuckle | 49 | 36 |
|
||
Tie rod end | Tie rod end to Steering knuckle | 49 | 36 |
|
||
Steering knuckle | Front steering knuckle to Shock absorber | 230 | 170 |
|
||
Steering rack | Rack housing cap | 59 | 44 |
|
||
Steering rack | Rack guide spring cap lock nut | 51 | 38 |
|
||
Steering rack | Rack guide spring cap lock nut | 69 | 51 | For use without SST |
|
|
Steering rack | Rack to Rack end sub-assembly | 60 | 44 |
|
||
Steering rack | Rack to Rack end sub-assembly | 84 | 62 | For use without SST |
|
|
Steering rack | Rack & pinion power steering gear assembly to Front frame assembly | 70 | 52 |
|
||
Steering rack | Rack & pinion power steering gear assembly to Front frame assembly | 70 | 52 |
|
||
Steering rack | Steering link assembly set bolt | 70 | 52 |
|
||
Steering column | Steering column assembly set bolt and nut | 21 | 15 |
|
||
Steering shaft | Intermediate shaft assembly to Steering link assembly | 35 | 26 |
|
||
Steering shaft | Intermediate shaft sub-assembly to Universal joint assembly | 35 | 26 |
|
||
Steering shaft | Intermediate shaft sub-assembly to Control valve shaft | 35 | 26 |
|
||
Steering shaft | Universal joint assembly to Main shaft assembly | 35 | 26 |
|
||
Steering wheel | Steering wheel set nut | 50 | 37 |
|
||
Steering wheel | Steering wheel pad set screw | 9 | 7 |
|
||
Steering wheel | Steering wheel assembly to Steering column assembly | 50 | 37 |
|
||
Power steering | Vane pump assembly housing rear to Housing front | 22 | 16 |
|
||
Power steering | Vane pump assembly housing rear to Housing front | 24 | 18 |
|
||
Power steering | Vane pump assembly pressure port union | 69 | 51 |
|
||
Power steering | Vane pump assembly pressure port union | 83 | 61 |
|
||
Power steering | Vane pump assembly suction port union set bolt | 12 | 9 |
|
||
Power steering | Vane pump assembly suction port union set bolt | 13 | 10 |
|
||
Power steering | Vane pump assembly set bolt | 37 | 27 |
|
||
Power steering | Vane pump assembly set bolt | 26 | 19 | For use without SST |
|
|
Power steering | Vane pump assembly set bolt | 43 | 32 |
|
||
Power steering | Vane pump assembly to Timing chain cover | 43 | 32 |
|
||
Power steering | Vane pump assembly pulley set nut | 44 | 32 |
|
||
Power steering | Vane pump bracket front to Housing front | 43 | 32 |
|
||
Power steering | Vane pump bracket front to Housing rear | 43 | 32 |
|
||
Power steering | Vane pump assembly pressure feed tube assembly set union bolt | 52 | 38 |
|
||
Power steering | Vane pump assembly pressure feed tube assembly set union bolt | 52 | 38 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust pipe assembly front to Exhaust manifold converter sub-assembly | 48 | 35 |
|
||
Exhaust manifold | Exhaust pipe assembly front to Exhaust manifold converter sub-assembly (LH) | 56 | 41 |
|
||
Exhaust manifold | Exhaust pipe assembly front to Exhaust pipe support bracket No.1 | 21 | 15 |
|
||
Exhaust manifold | Exhaust pipe sub-assembly front No.3 to Exhaust pipe assembly front | 56 | 41 |
|
||
Exhaust manifold | Exhaust pipe sub-assembly front No.3 to Exhaust manifold converter sub-assembly (RH) | 56 | 41 |
|
||
Exhaust manifold | Exhaust pipe assembly center to Exhaust pipe assembly front | 56 | 41 |
|
||
Exhaust manifold | Exhaust pipe assembly center to Exhaust pipe assembly front | 48 | 35 |
|
||
Exhaust manifold | Exhaust pipe assembly center to Exhaust pipe sub-assembly front No.3 | 48 | 35 |
|
||
Exhaust manifold | Exhaust pipe assembly tail to Exhaust pipe assembly center | 48 | 35 |
|
||
Exhaust manifold | Exhaust pipe assembly tail to Exhaust pipe assembly center | 48 | 35 |
|
||
Exhaust manifold | Exhaust pipe support bracket No.1 to Body | 21 | 15 |
|
||
Exhaust manifold | Exhaust manifold stay to Cylinder block | 44 | 32 |
|
||
Exhaust manifold | Manifold stay to Cylinder head | 49 | 36 |
|
||
Exhaust manifold | Manifold stay No.2 to Cylinder block | 49 | 36 |
|
||
Exhaust manifold | Exhaust pipe assembly front to Exhaust manifold converter sub-assembly | 44 | 32 |
|
||
Exhaust manifold | Manifold stay to Exhaust converter sub-assembly | 49 | 36 |
|
||
Exhaust manifold | Manifold stay No.2 to Exhaust converter sub-assembly No.2 | 49 | 36 |
|
||
Catalytic converter | Exhaust manifold converter sub-assembly to Cylinder head | 37 | 27 |
|
||
Catalytic converter | Exhaust converter sub-assembly to Cylinder head | 49 | 36 |
|
||
Catalytic converter | Exhaust converter sub-assembly No.2 to Cylinder head | 49 | 36 |
|
||
Catalytic converter | Manifold converter insulator No.1 to Exhaust manifold converter | 12 | 9 |
|
||
Catalytic converter | Exhaust manifold heat insulator No.2 to Exhaust manifold converter sub-assembly No.2 | 9 | 7 |
|
||
Catalytic converter | Exhaust manifold heat insulator No.3 to Exhaust manifold converter sub-assembly No.2 | 9 | 7 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front axle assembly to Front brake caliper assembly | 104 | 77 |
|
||
Disc brake | Front brake cylinder mounting to Steering knuckle | 104 | 77 |
|
||
Disc brake | Rear brake disc cylinder mounting to Rear axle | 78 | 58 |
|
||
Disc brake | Front brake cylinder to Front brake cylinder mounting | 34 | 25 |
|
||
Disc brake | Rear brake cylinder to Rear brake cylinder mounting | 43 | 32 |
|
||
Disc brake | Brake actuator with bracket to Body | 19 | 14 |
|
||
Disc brake | Brake actuator assembly to Brake tube | 15 | 11 |
|
||
Disc brake | Brake actuator to Brake actuator bracket assembly | 5 | 4 |
|
||
Disc brake | Bleeder plug | 8 | 6 |
|
||
Brake line | Front disc brake cylinder to Flexible hose | 29 | 21 |
|
||
Brake line | Rear disc brake cylinder to Flexible hose | 29 | 21 |
|
||
Brake booster | Brake booster clevis lock nut | 26 | 19 |
|
||
Brake booster | Brake booster to Body | 13 | 10 |
|
||
Brake pedal | Brake pedal support sub-assembly to Brake pedal sub-assembly | 37 | 27 |
|
||
Brake pedal | Brake pedal support sub-assembly to Body | 13 | 10 |
|
||
Brake pedal | Brake pedal support sub-assembly to Instrument panel reinforcement | 20 | 15 |
|
||
Brake pedal | Accelerator pedal rod assembly to Body | 5 | 4 |
|
||
Brake pedal | Accelerator pedal rod assembly to Body | 5 | 4 |
|
||
Master cylinder | Brake master cylinder to Brake booster | 13 | 10 |
|
||
Master cylinder | Brake master cylinder to Brake tube | 15 | 11 |
|
||
Parking brake | Parking brake cable lock nut | 6 | 4 |
|
||
Parking brake | Parking brake control pedal set bolt | 39 | 29 |
|
||
Parking brake | Parking brake cable assembly No.1 to Body bolt | 9 | 7 |
|
||
Parking brake | Parking brake cable assembly No.1 to Body nut | 6 | 4 |
|
||
Parking brake | Parking brake cable assembly No.3 to Body bolt | 9 | 7 | Bolt A |
|
|
Parking brake | Parking brake cable assembly No.3 to Body bolt | 39 | 29 | Bolt B |
|
|
Parking brake | Parking brake cable assembly No.3 to Body nut | 6 | 4 |
|
||
Parking brake | Parking brake cable No.3 to Backing plate | 8 | 6 |
|
||
ABS | Flexible hose and ABS speed sensor wire harness bracket to Front shock absorber | 19 | 14 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Wheel nut | 103 | 76 |
|
||
Stabilizer bar | Front stabilizer bar bracket to Suspension member | 16 | 12 |
|
||
Stabilizer bar | Stabilizer bracket No.1 to Suspension crossmember | 16 | 12 |
|
||
Stabilizer bar | Front stabilizer bar to Front frame assembly | 29 | 21 | 3MZ-FE |
|
|
Sway bar links/Stabilizer links | Front stabilizer bar link set nut | 74 | 55 |
|
||
Sway bar links/Stabilizer links | Front stabilizer link assembly to Front suspension | 74 | 55 | 2AZ-FE |
|
|
Sway bar links/Stabilizer links | Front stabilizer link assembly to Front suspension | 74 | 55 | 3MZ-FE |
|
|
Control arm | Lower suspension arm set bolt front side | 200 | 148 |
|
||
Control arm | Lower suspension arm set bolt rear side | 206 | 152 |
|
||
Ball joint | Front suspension arm to Lower ball joint | 127 | 94 | 2AZ-FE |
|
|
Ball joint | Front suspension arm to Lower ball joint | 127 | 94 | 3MZ-FE |
|
|
Ball joint | Lower ball joint assembly front set nut | 123 | 91 |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 2