Toyota Vista V40 (1994-1998) Torque Spec Settings
Kuha455405, CC BY-SA 3.0, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Vista V40 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Vista V40
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Intake manifold | Intake manifold | 19 | 14 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1994 - 1998
- Generation: 4
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pump | Oil pump pulley bolt | 28 | 21 |
|
|
|
| Fuel sytem | Fuel inlet hose | 34 | 25 |
|
|
|
| Fuel sytem | Distribution pipe | 13 | 10 |
|
|
|
| Cylinder head | Cylinder head cover | 23 | 17 |
|
|
|
| Cylinder head | Cylinder head bolts | 49 | 36 |
|
|
|
| Throttle body | Throttle body | 19 | 14 |
|
|
|
| Spark plugs | Spark splugs | 18 | 13 |
|
|
|
| Spark plugs | Spark plugs tubes | 39 | 29 |
|
|
|
| Intake manifold | Intake manifold | 19 | 14 |
|
|
|
| Intake manifold | No.2 Intake manifold stay | 42 | 31 |
|
|
|
| Engine mounts | RH Engine mounting bracket | 52 | 38 |
|
|
|
| Engine mounts | RH engine hanger assembly | 42 | 31 |
|
|
|
| Engine mounts | LH engine hanger assembly | 25 | 18 |
|
|
|
| Battery | Ignition timing | 19 | 14 |
|
|
|
| Alternator | Alternator pivot bolt | 54 | 40 |
|
|
|
| Alternator | Adjusting bolt | 19 | 14 |
|
|
|
| Alternator | Alternator bracket | 42 | 31 |
|
|
|
| Camshaft | RH camshaft timing pulley bolt | 54 | 40 |
|
|
|
| Camshaft | LH camshaft timing pulley bolt (with SST) | 37 | 27 |
|
|
|
| Camshaft | Camshaft bearing caps | 19 | 14 |
|
|
|
| Crankshaft | Crankshaft timing pulley | 108 | 80 |
|
|
|
| Water pump | Water by-pass pipe (nut) | 9.3 | 7 |
|
|
|
| Water pump | Water by-pass pipe (bolt) | 19 | 14 |
|
|
|
| Water pump | Water outlet | 15 | 11 |
|
|
|
| Belt tensioner/Timing chains | No.1 timing belt cover | 108 | 80 |
|
|
|
| Belt tensioner/Timing chains | No.3 timing belt cover | 7.8 | 6 |
|
|
|
| Belt tensioner/Timing chains | No.1 idler pulley | 42 | 31 |
|
|
|
| Belt tensioner/Timing chains | No.2 idler pulley | 42 | 31 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | EGR valve nut | 13 | 10 |
|
|
|
| Exhaust manifold | EGR valve union nut | 59 | 44 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Did you find the answer to your specific question?
👍 0 👎 1
