Toyota Vista V50 (1998-2003) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Vista V50 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Vista V50
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Intake manifold | Intake manifold | 19 | 14 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1998 - 2003
- Generation: 5
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pump | Oil pump pulley nut | 24 | 18 |
|
||
Fuel system | Fuel delivery pipe | 13 | 10 |
|
||
Fuel system | Fuel inlet hose | 34 | 25 |
|
||
Fuel system | Fuel inlet hose (with SST) | 29 | 21 |
|
||
Cylinder head | Cylinder head bolts | 49 | 36 |
|
||
Cylinder head | Cylinder head cover | 44 | 32 |
|
||
Battery | Ignition coils (12mm) | 21 | 15 |
|
||
Battery | Ignition coils (14mm) | 42 | 31 |
|
||
Spark plugs | Spark plug | 18 | 13 |
|
||
Spark plugs | Spark plug tubes | 49 | 36 |
|
||
Intake manifold | Intake manifold | 19 | 14 |
|
||
Intake manifold | Intake manifold stay | 39 | 29 |
|
||
Intake manifold | No.2 intake manifold stay bolts (12mm) | 21 | 15 |
|
||
Intake manifold | No.2 intake manifold stay bolts (14mm) | 42 | 31 |
|
||
Engine mounts | No.2 RH Engine mounting bracket | 52 | 38 |
|
||
Engine mounts | Engine moving control rod | 64 | 47 |
|
||
Engine mounts | RH engine hanger assembly | 42 | 31 |
|
||
Engine mounts | LH engine hanger assembly | 25 | 18 |
|
||
Camshaft | Camshaft timing pulley | 54 | 40 |
|
||
Camshaft | Camshaft timing pulley (with SST) | 37 | 27 |
|
||
Camshaft | Camshaft bearing cap bolts | 19 | 14 |
|
||
Camshaft | Camshaft position sensor assembly | 9.5 | 7 |
|
||
Crankshaft | Crankshaft pulley center bolt | 108 | 80 |
|
||
Water pump | Water by-pass pipe | 19 | 14 |
|
||
Water pump | Water outlet | 15 | 11 |
|
||
Belt tensioner/Timing chains | No.1 idler pulley | 42 | 31 |
|
||
Belt tensioner/Timing chains | No.2 idler pulley | 42 | 31 |
|
||
Belt tensioner/Timing chains | No.3 timing belt cover | 7.8 | 6 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
EGR | EGR valve nut | 13.3 | 10 |
|
||
EGR | EGR valve union nut | 61.2 | 45 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 0