Toyota Hilux 6 (1997-2005) Torque Spec Settings
By Vauxford - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Toyota Hilux 6 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque settings for Toyota Hilux 6
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 34 | 25 |
|
|
|
| Intake manifold | Intake manifold | 12 | 9 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1997 - 2005
- Generation: 6
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug | 34 | 25 |
|
|
|
| Oil pan | Oil pan | 16 | 12 |
|
|
|
| Oil filter | Oil strainer | 8 | 6 |
|
|
|
| Oil pressure switch | Oil pressure switch | 16 | 12 |
|
|
|
| Oil dipstick | Oil dipstick guide | 20 | 15 |
|
|
|
| Oil dipstick | Dipstick guide | 29 | 21 |
|
|
|
| Oil pump | Oil pump | 13 | 10 | Bolt |
|
|
| Oil pump | Oil pump | 16 | 12 | Union bolt |
|
|
| Piston rods | Connecting rod | 29 | 21 |
|
|
|
| Cylinder head | Cylinder head | 39 | 29 |
|
|
|
| Glow plugs | Glow plugs | 13 | 10 |
|
|
|
| Intake manifold | Intake manifold | 12 | 9 |
|
|
|
| Glow control unit | Intake pipe | 11 | 8 |
|
|
|
| Throttle body | Throttle body | 20 | 15 |
|
|
|
| Engine block | Cylinder block | 25 | 18 |
|
|
|
| Engine block | Oil seal retainer | 13 | 10 |
|
|
|
| Engine mounts | LH Engine mounting bracket | 68 | 50 |
|
|
|
| Engine mounts | RH Engine mounting bracket | 68 | 50 |
|
|
|
| Sensor | Water temperature sensor | 25 | 18 |
|
|
|
| Sensor | Fuel temperature sensor | 22 | 16 |
|
|
|
| Sensor | Crankshaft position sensor | 5 | 4 |
|
|
|
| Sensor | First gear position sensor | 30 | 22 |
|
|
|
| Alternator | Alternator | 21 | 15 | Lock bolt |
|
|
| Alternator | Alternator | 62 | 46 | Pivot bolt |
|
|
| Alternator | Alternator bracket | 21 | 15 |
|
|
|
| Alternator | Alternator adjusting bar | 21 | 15 |
|
|
|
| Camshaft | No.1 camshaft timing pulley x camshaft | 98 | 72 |
|
|
|
| Camshaft | No.2 camshaft timing pulley x Injection pump drive gear | 13 | 10 |
|
|
|
| Camshaft | Camshaft oil seal retainer | 9 | 7 |
|
|
|
| Camshaft | Camshaft bearing cap | 18 | 13 |
|
|
|
| Camshaft | Main bearing cap | 49 | 36 |
|
|
|
| Crankshaft | Crankshaft Oil Seal | 49 | 36 |
|
|
|
| Crankshaft | Crankshaft pulley | 363 | 268 |
|
|
|
| Water pump | Water pump | 13 | 10 |
|
|
|
| Water pump | Water pump cover | 21 | 15 |
|
|
|
| Water pump | Water pump pulley | 18 | 13 |
|
|
|
| Fuel/Oil cooler | Oil cooler cover | 8 | 6 | Drain plug |
|
|
| Fuel/Oil cooler | Oil cooler cover | 16 | 12 | Oil cooler |
|
|
| Fuel/Oil cooler | Oil cooler cover | 13 | 10 | Cylinder block |
|
|
| Radiator | Water outlet | 16 | 12 |
|
|
|
| Radiator | Water inlet | 13 | 10 |
|
|
|
| Radiator | Thermostat | 16 | 12 |
|
|
|
| Belt tensioner/Timing chains | Injection pump | 21 | 15 |
|
|
|
| Belt tensioner/Timing chains | Idler pulley bolt | 35 | 26 |
|
|
|
| Belt tensioner/Timing chains | Timing belt tensioner | 13 | 10 |
|
|
|
| Belt tensioner/Timing chains | Timing gear case | 19 | 14 |
|
|
|
| Belt tensioner/Timing chains | Timing gear cover | 13 | 10 |
|
|
|
| Fuel system | Injection pump drive gear | 64 | 47 |
|
|
|
| Fuel system | Injection nozzle | 15 | 11 |
|
|
|
| Fuel system | Injection pump | 15 | 11 |
|
|
|
| Fuel system | Fuel inlet pipe | 23 | 17 | Cap nut |
|
|
| Fuel system | Fuel inlet pipe | 25 | 18 | Bolt |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel | 145 | 107 |
|
|
|
| Transfer | Accelerator cable bracket | 20 | 15 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold | 52 | 38 |
|
|
|
| Exhaust manifold | Exhaust manifold heat insulator | 8 | 6 |
|
|
|
| Turbo | Turbine inlet elbow | 19 | 14 |
|
|
|
| Turbo | Turbo water pipe | 12 | 9 | Nut |
|
|
| Turbo | Turbo water pipe | 8 | 6 | Bolt |
|
|
| Turbo | Turbocharger | 52 | 38 |
|
|
|
| Turbo | Turbocharger stay | 19 | 14 |
|
|
|
| Turbo | Turbine outlet elbow | 39 | 29 |
|
|
|
| Turbo | Turbocharger heat insulator | 8 | 6 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Tennen-Gas - Own work, CC BY-SA 3.0
Did you find the answer to your specific question?
👍 1 👎 4
