Toyota RAV4 XA30 (2005-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota RAV4 XA30 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota RAV4 XA30
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheel hub assembly | Front axle hub nut | 216 | 159 | Ø26 |
|
|
| Wheel hub assembly | Front axle hub nut | 292 | 215 | Ø30 |
|
|
| Wheels | Front wheel | 103 | 76 |
|
|
|
| Wheels | Rear wheel | 103 | 76 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2012
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug to Oil pan | 47 | 35 |
|
|
|
| Oil pan | Oil drain plug to Oil pan | 40 | 30 |
|
|
|
| Oil pan | Oil pan drain plug to No.2 oil pan | 40 | 30 |
|
|
|
| Oil pan | Oil pan to Stiffening crankcase bolt and nut | 9 | 7 |
|
|
|
| Oil pan | Oil pan to Cylinder block | 10 | 7 | Bolt A |
|
|
| Oil pan | Oil pan to Cylinder block | 21 | 15 | Except bolt A and nut |
|
|
| Oil pan | No.2 oil pan to Oil pan | 10 | 7 |
|
|
|
| Oil pan | Oil pan baffle plate to Cylinder block | 10 | 7 |
|
|
|
| Oil filter | Oil filter to Stiffening crankcase | 17 | 13 |
|
|
|
| Oil filter | Oil filter cap to Oil pan | 25 | 18 |
|
|
|
| Oil filter | Oil filter drain plug to Oil filter cap | 13 | 10 |
|
|
|
| Oil filter | Oil strainer to Valve body | 11 | 8 |
|
|
|
| Oil filter | Oil strainer to Cylinder block | 10 | 7 |
|
|
|
| Oil pressure switch | Oil pressure switch to Cylinder head | 13 | 10 |
|
|
|
| Oil pressure switch | Oil pressure switch to Oil pan | 15 | 11 |
|
|
|
| Oil dipstick | Oil dipstick guide to Cylinder block | 9 | 7 |
|
|
|
| Oil dipstick | No.1 oil dipstick guide to Cylinder block | 21 | 15 |
|
|
|
| Oil dipstick | No.2 oil dipstick guide to Cylinder block | 21 | 15 |
|
|
|
| Oil feeder | Oil filler cap to Cylinder head cover | 3 | 2 |
|
|
|
| Oil feeder | Oil filler tube to Transaxle | 6 | 4 |
|
|
|
| Oil feeder | Oil filler tube to Front engine mounting bracket | 6 | 4 |
|
|
|
| Oil pump | Oil pump to Cylinder block | 19 | 14 |
|
|
|
| Oil pump | Oil pump assembly to Transaxle case | 22 | 16 |
|
|
|
| Oil pump | Oil pump body to Stator shaft assembly | 10 | 7 |
|
|
|
| Oil pump | Oil pump drive shaft sprocket to Oil pump | 30 | 22 |
|
|
|
| Oil pump | Oil pump cover to Oil pump | 9 | 7 |
|
|
|
| Oil pump | Oil pump cover to Timing chain cover | 9 | 7 |
|
|
|
| Oil pump | Oil pump relief valve to Oil pump | 49 | 36 |
|
|
|
| Oil pump | Plug to Oil pump cover | 49 | 36 |
|
|
|
| Oil pump | Oil pump strainer to Oil pump | 9 | 7 |
|
|
|
| Piston rods | Connecting rod bolt | 25 | 18 | Step 1 |
|
|
| Piston rods | Connecting rod to Connecting cap | 25 | 18 | Step 1 |
|
|
| Cylinder head | Cylinder head set bolt | 70 | 52 | Step 1 |
|
|
| Cylinder head | Cylinder head stud bolts | 10 | 7 | Stud bolts A and B |
|
|
| Cylinder head | Cylinder head stud bolt | 4 | 3 | Stud bolt C |
|
|
| Cylinder head | Cylinder head (for bank 1) to Cylinder block | 36 | 27 | Step 1 |
|
|
| Cylinder head | Cylinder head (for bank 2) to Cylinder block | 36 | 27 | Step 1 |
|
|
| Cylinder head | Cylinder head (for bank 2) to Cylinder block | 30 | 22 | Except bolt |
|
|
| Cylinder head | Cylinder head cover to Cylinder head bolt | 11 | 8 | Bolt A |
|
|
| Cylinder head | Cylinder head cover to Cylinder head bolt | 14 | 10 | Bolt B |
|
|
| Cylinder head | Cylinder head cover to Cylinder head nut | 11 | 8 |
|
|
|
| Cylinder head | Cylinder head cover to Cylinder head | 21 | 15 | Bolt A |
|
|
| Cylinder head | Cylinder head cover to Cylinder head | 10 | 7 | Except bolt A |
|
|
| Cylinder head | Engine wire to Cylinder head cover | 8 | 6 |
|
|
|
| Cylinder head | No.1 engine cover to Cylinder head | 7 | 5 |
|
|
|
| Cylinder head | No.1 chain vibration damper to Cylinder head and cylinder block | 9 | 7 |
|
|
|
| Cylinder head | No.1 chain vibration damper to Cylinder block | 23 | 17 |
|
|
|
| Cylinder head | Chain tensioner slipper to Cylinder head and cylinder block | 19 | 14 |
|
|
|
| Cylinder head | No.1 water by-pass pipe to Cylinder head | 9 | 7 |
|
|
|
| Cylinder head | No.3 water by-pass hose to Cylinder head | 9 | 7 |
|
|
|
| Cylinder head | Oil pipe bracket to Cylinder head (for bank 1) | 10 | 7 |
|
|
|
| Cylinder head | Oil pipe union bolt to Cylinder head (for bank 1) | 65 | 48 |
|
|
|
| Cylinder head | Oil pipe union bolt to Cylinder head cover (for bank 1) | 65 | 48 |
|
|
|
| Cylinder head | No.1 oil pipe union bolt to Cylinder head (for bank 2) | 65 | 48 |
|
|
|
| Cylinder head | No.1 oil pipe union bolt to Cylinder head cover (for bank 2) | 65 | 48 |
|
|
|
| Spark plugs | Spark plug to Cylinder head sub-assembly | 25 | 18 |
|
|
|
| Spark plugs | Spark plug to Cylinder head sub-assembly | 25 | 18 |
|
|
|
| Intake manifold | Intake manifold to Cylinder head | 30 | 22 |
|
|
|
| Intake manifold | Intake manifold to Cylinder head | 21 | 15 |
|
|
|
| Intake manifold | Intake air surge tank to Intake manifold | 18 | 13 | 5mm hexagon wrench |
|
|
| Intake manifold | Intake air surge tank to Intake manifold | 21 | 15 | For bolt |
|
|
| Intake manifold | Intake air surge tank to Intake manifold | 16 | 12 | For nut |
|
|
| Throttle body | Throttle body to Intake manifold | 30 | 22 |
|
|
|
| Throttle body | Throttle body to Intake air surge tank assembly | 10 | 7 |
|
|
|
| Engine block | Cylinder block stud bolts | 5 | 4 | Bolts A, C and D |
|
|
| Engine block | Cylinder block stud bolt | 22 | 16 | Bolt B |
|
|
| Engine block | Cylinder block stud bolt | 10 | 7 |
|
|
|
| Engine block | No.1 oil nozzle to Cylinder block | 7 | 5 |
|
|
|
| Engine block | No.1 chain tensioner to Cylinder block | 10 | 7 |
|
|
|
| Engine block | Idler pulley bracket to Cylinder block | 60 | 44 |
|
|
|
| Engine block | Idle sprocket to Cylinder block | 60 | 44 |
|
|
|
| Engine block | Stiffening crankcase to Cylinder block | 24 | 18 |
|
|
|
| Engine block | Oil control valve filter to Cylinder block | 30 | 22 |
|
|
|
| Engine block | Cylinder block water drain cock to Cylinder block | 25 | 18 |
|
|
|
| Engine block | Cylinder block water drain cock to Cylinder block | 25 | 18 | Step 1 |
|
|
| Engine block | Cylinder block drain cock plug to Cylinder block | 13 | 10 |
|
|
|
| Engine block | Cylinder block drain cock plug to Cylinder block | 13 | 10 |
|
|
|
| Engine block | Engine rear oil seal retainer to Cylinder block | 10 | 7 |
|
|
|
| Engine mounts | Front engine mounting bracket to Transaxle | 64 | 47 |
|
|
|
| Engine mounts | Front No.1 engine mounting bracket to Timing chain cover | 54 | 40 |
|
|
|
| Engine mounts | Rear engine mounting bracket to Transaxle | 45 | 33 |
|
|
|
| Engine mounts | Engine mounting bracket LH to Transaxle | 64 | 47 |
|
|
|
| Engine mounts | Engine mounting bracket LH to Engine mounting insulator LH | 56 | 41 |
|
|
|
| Engine mounts | Engine mounting bracket RH to Timing chain cover | 55 | 41 |
|
|
|
| Engine mounts | Engine mounting bracket FR to Engine mounting insulator FR | 145 | 107 |
|
|
|
| Engine mounts | Engine mounting bracket RR to Engine mounting insulator RR | 95 | 70 |
|
|
|
| Engine mounts | No.2 engine mounting stay RH to Intake manifold | 21 | 15 |
|
|
|
| Engine mounts | No.2 engine mounting stay RH to Timing chain cover | 21 | 15 |
|
|
|
| Engine mounts | No.1 and No.2 engine hanger to Cylinder head | 38 | 28 |
|
|
|
| Sensor | Speed sensor (NC) to Transaxle | 11 | 8 |
|
|
|
| Sensor | Speed sensor (NT) to Transaxle | 11 | 8 |
|
|
|
| Sensor | Steering knuckle to Front speed sensor bolt | 9 | 7 |
|
|
|
| Sensor | Rear speed sensor to Rear axle carrier | 9 | 7 |
|
|
|
| Sensor | ATF temperature sensor to Valve body | 7 | 5 |
|
|
|
| Sensor | Camshaft position sensor to Cylinder head | 9 | 7 |
|
|
|
| Sensor | Crankshaft position sensor to Timing chain cover | 9 | 7 |
|
|
|
| Sensor | Crankshaft position sensor to Cylinder block | 10 | 7 |
|
|
|
| Sensor | Engine coolant temperature sensor to Cylinder head | 20 | 15 |
|
|
|
| Sensor | Engine coolant temperature sensor to Water outlet | 20 | 15 |
|
|
|
| Sensor | Knock sensor to Cylinder block | 20 | 15 |
|
|
|
| Sensor | Knock sensor to Cylinder block sub-assembly | 20 | 15 |
|
|
|
| Sensor | Air fuel ratio sensor to Exhaust manifold | 40 | 30 | For use with SST |
|
|
| Sensor | Air fuel ratio sensor to Exhaust manifold | 44 | 32 | For use without SST |
|
|
| Sensor | Air fuel ratio sensor to Exhaust manifold sub-assembly | 44 | 32 |
|
|
|
| Sensor | Air fuel ratio sensor to Exhaust manifold sub-assembly | 40 | 30 | With SST |
|
|
| Sensor | Heated oxygen sensor to Exhaust manifold | 40 | 30 | For use with SST |
|
|
| Sensor | Heated oxygen sensor to Exhaust manifold | 44 | 32 | For use without SST |
|
|
| Sensor | Oxygen sensor to Front pipe assembly | 44 | 32 |
|
|
|
| Sensor | Oxygen sensor to Front pipe assembly | 40 | 30 | With SST |
|
|
| Sensor | VVT sensor to Cylinder head cover | 10 | 7 |
|
|
|
| Alternator | Generator assembly to Cylinder block bolt | 21 | 15 | Bolt A |
|
|
| Alternator | Generator assembly to Cylinder block bolt | 52 | 38 | Bolt B |
|
|
| Alternator | Generator assembly to Cylinder block | 43 | 32 |
|
|
|
| Alternator | Generator wire harness bracket to Generator assembly | 8 | 6 |
|
|
|
| Alternator | Wire harness clamp stay to Generator assembly | 8 | 6 |
|
|
|
| Alternator | Generator wire to Generator assembly | 10 | 7 |
|
|
|
| Alternator | Generator wire to Generator assembly | 10 | 7 |
|
|
|
| Alternator | Generator pulley with clutch to Generator rotor assembly | 110 | 81 |
|
|
|
| Alternator | Generator pulley with clutch to Generator rotor assembly | 110 | 81 |
|
|
|
| Alternator | Bearing retainer plate to Generator drive end frame | 2 | 1 |
|
|
|
| Alternator | Bearing retainer plate to Generator drive end frame | 2 | 1 |
|
|
|
| Alternator | Generator brush holder assembly to Generator rectifier end frame | 2 | 1 |
|
|
|
| Alternator | Generator brush holder assembly to Generator rectifier end frame | 2 | 1 |
|
|
|
| Alternator | Generator rectifier end frame to Generator drive end frame | 6 | 4 |
|
|
|
| Alternator | Generator rectifier end frame to Generator drive end frame | 6 | 4 |
|
|
|
| Alternator | Cord clip to Generator rectifier end frame | 5 | 4 |
|
|
|
| Alternator | Generator rear end cover to Generator rectifier end frame | 5 | 4 |
|
|
|
| Alternator | Generator rear end cover to Generator rectifier end frame | 5 | 4 |
|
|
|
| Starter | Starter to Transaxle | 37 | 27 |
|
|
|
| Starter | Starter assembly to Cylinder block sub-assembly | 37 | 27 |
|
|
|
| Starter | Starter assembly to Cylinder block sub-assembly | 37 | 27 |
|
|
|
| Starter | Starter wire to Starter | 10 | 7 |
|
|
|
| Starter | Starter wire to Starter assembly | 10 | 7 |
|
|
|
| Starter | Starter wire to Starter assembly | 10 | 7 |
|
|
|
| Starter | Starter commutator end frame assembly to Starter drive housing assembly | 6 | 4 |
|
|
|
| Starter | Starter commutator end frame to Starter drive housing assembly | 6 | 4 |
|
|
|
| Starter | Magnetic switch assembly to Starter drive housing assembly | 8 | 6 |
|
|
|
| Starter | Starter magnetic switch assembly to Starter drive housing assembly | 8 | 6 |
|
|
|
| Battery | Battery carrier bracket to Body | 20 | 15 |
|
|
|
| Battery | Battery bracket reinforcement to Battery carrier | 20 | 15 |
|
|
|
| Battery | Battery bracket reinforcement to Body | 19 | 14 |
|
|
|
| Battery | Front battery carrier to Battery bracket reinforcement | 20 | 15 |
|
|
|
| Battery | Front battery bracket to Battery bracket reinforcement | 19 | 14 |
|
|
|
| Battery | Front battery bracket to Body | 19 | 14 |
|
|
|
| Battery | Battery clamp to Body bolt | 5 | 4 |
|
|
|
| Battery | Battery clamp to Body | 5 | 4 |
|
|
|
| Battery | Batter clamp to Front battery bracket nut | 5 | 4 |
|
|
|
| Battery | Battery clamp to Upper radiator support bolt | 9 | 7 |
|
|
|
| Battery | Ignition coil assembly to Cylinder head cover | 9 | 7 |
|
|
|
| Battery | Ignition coil assembly to Cylinder head cover | 10 | 7 |
|
|
|
| Camshaft | Camshaft timing gear to Camshaft | 54 | 40 |
|
|
|
| Camshaft | Camshaft timing gear to Intake camshaft | 100 | 74 |
|
|
|
| Camshaft | Camshaft timing exhaust gear to Exhaust camshaft | 100 | 74 |
|
|
|
| Camshaft | No.2 camshaft timing sprocket to No.2 camshaft | 54 | 40 |
|
|
|
| Camshaft | No.1 camshaft bearing cap to Cylinder head | 30 | 22 |
|
|
|
| Camshaft | No.2 camshaft bearing cap to Cylinder head | 30 | 22 |
|
|
|
| Camshaft | No.3 camshaft bearing cap to Cylinder head | 9 | 7 |
|
|
|
| Camshaft | Camshaft bearing cap to Camshaft housing (for bank 1) | 10 | 7 | Step 1 |
|
|
| Camshaft | Camshaft bearing cap to Camshaft housing (for bank 1) | 16 | 12 | Step 2 |
|
|
| Camshaft | Camshaft bearing cap to Camshaft housing (for bank 2) | 10 | 7 | Step 1 |
|
|
| Camshaft | Camshaft bearing cap to Camshaft housing (for bank 2) | 16 | 12 | Step 2 |
|
|
| Camshaft | Camshaft housing to Cylinder head (for bank 1) | 28 | 21 |
|
|
|
| Camshaft | Camshaft housing to Cylinder head (for bank 2) | 28 | 21 |
|
|
|
| Camshaft | No.2 chain tensioner to Camshaft housing (for bank 1) | 21 | 15 |
|
|
|
| Camshaft | No.3 chain tensioner to Camshaft housing (for bank 2) | 21 | 15 |
|
|
|
| Camshaft | Camshaft timing oil control valve to Cylinder head | 9 | 7 |
|
|
|
| Camshaft | Camshaft timing oil control valve to Cylinder head cover | 10 | 7 |
|
|
|
| Crankshaft | Crankshaft pulley to Crankshaft | 180 | 133 |
|
|
|
| Crankshaft | Crankshaft pulley to Crankshaft | 250 | 184 |
|
|
|
| Crankshaft | Crankshaft bearing cap set bolt | 40 | 30 | Step 1 |
|
|
| Crankshaft | Cylinder block to Crankshaft bearing cap | 61 | 45 | Step 1 |
|
|
| Crankshaft | Main bearing cap bolt | 52 | 38 |
|
|
|
| Crankshaft | Chain tensioner plate to Crankshaft bearing cap | 12 | 9 |
|
|
|
| Crankshaft | Timing chain guide to Crankshaft bearing cap | 9 | 7 |
|
|
|
| Crankshaft | Balance shaft housing to Stiffening crankcase | 22 | 16 | Step 1 |
|
|
| Water pump | Water pump to Cylinder block | 9 | 7 |
|
|
|
| Water pump | Water pump to Cylinder block | 21 | 15 | Bolt A |
|
|
| Water pump | Water pump to Cylinder block | 9 | 7 | Bolt B |
|
|
| Water pump | Water pump to Cylinder block | 9 | 7 | Bolt C |
|
|
| Water pump | Water pump pulley to Water pump | 26 | 19 |
|
|
|
| Water pump | Water pump pulley to Water pump | 21 | 15 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet elbow to Transaxle | 27 | 20 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet elbow to Transaxle | 27 | 20 |
|
|
|
| Fuel/Oil cooler | Oil cooler pipe to Cylinder head | 9 | 7 |
|
|
|
| Radiator | Radiator reservoir to Radiator support RH and engine mounting insulator RH | 5 | 4 |
|
|
|
| Radiator | Radiator reservoir tank to Body | 5 | 4 |
|
|
|
| Radiator | Upper radiator support to Radiator support LH and RH | 29 | 21 |
|
|
|
| Radiator | Upper radiator support to Radiator support LH and RH | 29 | 21 |
|
|
|
| Radiator | Upper radiator support bracket to Upper radiator support | 45 | 33 |
|
|
|
| Radiator | Fan shroud with cooling fan to Radiator | 11 | 8 |
|
|
|
| Radiator | Fan shroud with cooling fan to Radiator | 11 | 8 |
|
|
|
| Radiator | No.2 fan shroud to Radiator | 11 | 8 |
|
|
|
| Radiator | No.2 fan shroud to Radiator | 11 | 8 |
|
|
|
| Radiator | No.2 fan shroud to Cooler condenser | 11 | 8 |
|
|
|
| Radiator | No.1 and No.2 cooling fan motor to Fan shroud | 4 | 3 |
|
|
|
| Radiator | No.1 and No.2 cooling fan motor to Fan shroud | 4 | 3 |
|
|
|
| Radiator | Fan to No.1 and No.2 cooling fan motor | 6 | 4 |
|
|
|
| Radiator | Fan to No.1 and No.2 cooling fan motor | 6 | 4 |
|
|
|
| Radiator | Water inlet to Cylinder block | 9 | 7 |
|
|
|
| Radiator | Water inlet pipe to Cylinder block | 10 | 7 |
|
|
|
| Radiator | Water inlet to Water inlet housing | 10 | 7 |
|
|
|
| Radiator | Water outlet to Cylinder head | 10 | 7 |
|
|
|
| Radiator | No.1 water by-pass pipe to Upper radiator support | 9 | 7 |
|
|
|
| Radiator | No.1 water by-pass pipe to Upper radiator support | 9 | 7 |
|
|
|
| Air conditioning | Air conditioning unit assembly to Body | 10 | 7 |
|
|
|
| Air conditioning | Air conditioning unit assembly to Instrument panel reinforcement | 10 | 7 |
|
|
|
| Air conditioning | Discharge hose sub-assembly to Cooler compressor assembly | 10 | 7 |
|
|
|
| Air conditioning | Suction hose sub-assembly to Cooler compressor assembly | 10 | 7 |
|
|
|
| Air conditioning | Discharge hose sub-assembly to Cooler condenser assembly | 10 | 7 |
|
|
|
| Air conditioning | Suction hose sub-assembly to Cooler condenser assembly | 10 | 7 |
|
|
|
| Air conditioning | Suction tube sub-assembly to Suction hose sub-assembly | 10 | 7 |
|
|
|
| Air conditioning | No.1 cooler refrigerant suction hose to Cooler compressor assembly | 10 | 7 |
|
|
|
| Air conditioning | No.1 cooler refrigerant discharge hose to Cooler compressor assembly | 10 | 7 |
|
|
|
| Air conditioning | Cooler compressor assembly to Engine | 25 | 18 |
|
|
|
| Air conditioning | No.1 cooler refrigerant discharge hose to Cooler condenser assembly | 10 | 7 |
|
|
|
| Air conditioning | Cooler refrigerant liquid pipe to Cooler condenser assembly | 10 | 7 |
|
|
|
| Air conditioning | Cap to Cooler condenser assembly | 5 | 4 |
|
|
|
| Air conditioning | Cooler expansion valve to No.1 cooler evaporator sub-assembly | 4 | 3 |
|
|
|
| Belt tensioner/Timing chains | No.1 chain tensioner to Timing chain cover | 9 | 7 |
|
|
|
| Belt tensioner/Timing chains | No.2 idler pulley to Timing chain cover | 43 | 32 |
|
|
|
| Belt tensioner/Timing chains | No.2 timing gear cover to Timing chain cover | 6 | 4 |
|
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt | 9 | 7 | 10mm head |
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt | 25 | 18 | 12mm head |
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block bolt | 55 | 41 | 14mm head |
|
|
| Belt tensioner/Timing chains | Timing chain cover to Cylinder head and cylinder block nut | 11 | 8 |
|
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner to Timing chain cover | 60 | 44 |
|
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner to Timing chain cover | 43 | 32 |
|
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner to Cylinder block | 43 | 32 |
|
|
|
| PCM | ECM with bracket to Body | 7 | 5 |
|
|
|
| PCM | ECM to Body | 7 | 5 |
|
|
|
| PCM | No.1 ECM bracket to ECM | 3 | 2 |
|
|
|
| PCM | No.2 ECM bracket to ECM | 3 | 2 |
|
|
|
| Fuel system | Fuel delivery pipe to Cylinder head | 20 | 15 |
|
|
|
| Fuel system | Fuel delivery pipe sub-assembly to Intake manifold | 21 | 15 |
|
|
|
| Fuel system | Fuel tank vent tube set plate to Fuel tank | 4 | 3 |
|
|
|
| Fuel system | Fuel tank bent tube set plate to Fuel tank assembly | 4 | 3 |
|
|
|
| Fuel system | Fuel tank filler pipe to Body | 24 | 18 |
|
|
|
| Fuel system | Fuel filler pipe to Body | 24 | 18 |
|
|
|
| Fuel system | Fuel tank band to Body | 40 | 30 |
|
|
|
| Fuel system | Fuel tank band to Body | 40 | 30 |
|
|
|
| Fuel system | Fuel sender gauge assembly to Fuel tank | 2 | 1 |
|
|
|
| Fuel system | Fuel sender gauge assembly to Fuel tank | 2 | 1 |
|
|
|
| Fuel system | Fuel pressure pulsation damper to Fuel delivery pipe | 9 | 7 |
|
|
|
| Fuel system | Fuel pump resistor to Body | 7 | 5 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential gear lube apply tube to Transaxle housing | 10 | 7 |
|
|
|
| Differential | Rear differential support to Rear suspension member | 140 | 103 |
|
|
|
| Differential | Rear differential No.2 support to Rear suspension member | 86 | 63 |
|
|
|
| Differential | Rear differential No.1 support to Rear differential | 55 | 41 |
|
|
|
| Differential | Rear differential No.2 support to Rear differential | 55 | 41 |
|
|
|
| Differential | Rear differential support to Rear differential | 98 | 72 |
|
|
|
| Differential | Drain plug to Differential carrier | 39 | 29 |
|
|
|
| Differential | Filler plug to Differential carrier | 39 | 29 |
|
|
|
| Differential | Electromagnetic coupling to Differential carrier | 20 | 15 |
|
|
|
| Differential | Yoke to Differential carrier | 5 | 4 |
|
|
|
| Differential | Drive pinion nut to Differential drive pinion | 245 | 181 | Maximum torque |
|
|
| Differential | Differential side bearing retainer to Differential carrier | 34 | 25 |
|
|
|
| Differential | Differential carrier to Differential breather plug oil deflector | 5 | 4 |
|
|
|
| Differential | Differential ring gear to Differential case | 90 | 66 |
|
|
|
| Wheel hub assembly | Rear axle carrier to Rear axle hub and bearing | 90 | 66 |
|
|
|
| Wheel hub assembly | Front axle hub nut | 216 | 159 | Ø26 |
|
|
| Wheel hub assembly | Front axle hub nut | 292 | 215 | Ø30 |
|
|
| Flywheel/Flex plate | Flywheel housing under cover to Automatic transaxle | 8 | 6 |
|
|
|
| Flywheel/Flex plate | Drive plate to Crankshaft | 98 | 72 |
|
|
|
| Flywheel/Flex plate | Drive plate and ring gear to Crankshaft | 178 | 131 |
|
|
|
| Transmission fluid pan | Oil pan to Transaxle | 8 | 6 |
|
|
|
| Transmission fluid pan | Automatic transaxle oil pan sub-assembly to Transaxle case | 8 | 6 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block upper side bolt | 64 | 47 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block lower side bolt A | 37 | 27 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block lower side bolt B | 46 | 34 |
|
|
|
| Transmission mount/case | Transmission wire to Transaxle | 5 | 4 |
|
|
|
| Transmission mount/case | Valve body to Transaxle | 11 | 8 |
|
|
|
| Transmission mount/case | Brake apply tube clamp to Transaxle case | 5 | 4 |
|
|
|
| Transmission mount/case | Transaxle case No.1 plug to Transaxle rear cover | 7 | 5 |
|
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 19 | 14 | Bolt A |
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 25 | 18 | Other bolt |
|
|
| Transmission mount/case | Parking lock pawl shaft to Transaxle case | 10 | 7 |
|
|
|
| Transmission mount/case | Parking lock pawl bracket to Transaxle case | 20 | 15 |
|
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 22 | 16 | Bolt A |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 29 | 21 | Bolt B |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 29 | 21 | Bolt C |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 22 | 16 | Bolt D |
|
|
| Transmission mount/case | Automatic transmission case plug to Transaxle housing | 7 | 5 |
|
|
|
| Transmission mount/case | Automatic transmission case plug to Transaxle case | 7 | 5 |
|
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 20 | 15 | Bolt A |
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 12 | 9 | Bolt B |
|
|
| Torque converter | Torque converter clutch to Drive plate | 41 | 30 |
|
|
|
| Transfer | Breather oil deflector to Transfer | 7 | 5 |
|
|
|
| Transfer | Output shaft to Transfer gear nut | 360 | 266 |
|
|
|
| Transfer | Driven pinion front bearing to Transfer case | 38 | 28 |
|
|
|
| Transfer | No.1 transfer case cover to Transfer case | 47 | 35 |
|
|
|
| Transfer | Transfer drain plug to Transfer case | 49 | 36 |
|
|
|
| Transfer | Transfer and transaxle setting stud bolt to Transfer case | 39 | 29 |
|
|
|
| Transfer | Transfer assembly to Transaxle | 69 | 51 |
|
|
|
| Transfer | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Transfer | Park/Neutral position switch bolt | 5 | 4 |
|
|
|
| Transfer | Park/Neutral start switch to Control shaft lever | 13 | 10 |
|
|
|
| Transfer | Control shaft lever to Control shaft | 13 | 10 |
|
|
|
| Transfer | Shift control cable to Control shaft lever | 15 | 11 |
|
|
|
| Transfer | Control cable clamp to Engine mounting insulator | 12 | 9 |
|
|
|
| Transfer | Control cable bracket No.1 to Transaxle | 12 | 9 |
|
|
|
| Transfer | Control cable bracket No.2 to Transaxle | 12 | 9 |
|
|
|
| Transfer | Floor shift assembly to Body | 12 | 9 |
|
|
|
| Drive/Axle shaft | Rear drive shaft to Rear axle shaft nut | 216 | 159 |
|
|
|
| Drive/Axle shaft | Drive shaft bearing bracket to Cylinder block | 64 | 47 |
|
|
|
| Drive/Axle shaft | Drive shaft bearing bracket to Cylinder block | 64 | 47 |
|
|
|
| Drive/Axle shaft | Drive shaft bearing bracket to Engine | 64 | 47 |
|
|
|
| Drive/Axle shaft | Drive shaft bearing case bolt | 64 | 47 |
|
|
|
| Drive/Axle shaft | Drive shaft bearing bracket to Drive shaft | 32 | 24 |
|
|
|
| Drive/Axle shaft | Propeller shaft to Transaxle companion flange | 35 | 26 |
|
|
|
| Drive/Axle shaft | Propeller shaft to Differential companion flange | 35 | 26 |
|
|
|
| Drive/Axle shaft | Propeller shaft center bearing to Body | 37 | 27 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Tie rod end | Tie rod end locknut | 88 | 65 | Use a combination spanner #21. Use a combination spanner #22. Use a torque wrench. |
|
|
| Tie rod end | Tie rod end to Steering knuckle | 49 | 36 |
|
|
|
| Steering knuckle | Steering knuckle to Front axle hub | 96 | 71 |
|
|
|
| Steering rack | Steering sliding yoke sub-assembly to Steering gear assembly | 35 | 26 |
|
|
|
| Steering column | Steering column to Instrument panel reinforcement assembly | 25 | 18 |
|
|
|
| Steering shaft | Steering intermediate shaft assembly No.2 to Steering column assembly | 35 | 26 |
|
|
|
| Steering shaft | Steering intermediate shaft assembly No.2 to Power steering gear | 35 | 26 |
|
|
|
| Steering shaft | Steering sliding yoke sub-assembly to Steering intermediate shaft assembly No.2 | 35 | 26 |
|
|
|
| Steering wheel | Steering wheel assembly to Steering column assembly | 50 | 37 |
|
|
|
| Steering wheel | Steering pad assembly to Steering wheel assembly | 9 | 7 |
|
|
|
| Steering wheel | Cruise control main switch assembly to Steering wheel assembly | 2 | 1 | Minimum torque |
|
|
| Steering wheel | Cruise control main switch assembly to Steering wheel assembly | 3 | 2 | Maximum torque |
|
|
| Power steering | Power steering gear to Front suspension crossmember sub-assembly | 138 | 102 |
|
|
|
| Power steering | Power steering ECU to Instrument panel reinforcement assembly | 5 | 4 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head | 37 | 27 |
|
|
|
| Exhaust manifold | Exhaust manifold LH to Cylinder head | 21 | 15 |
|
|
|
| Exhaust manifold | Exhaust manifold RH to Cylinder head | 21 | 15 |
|
|
|
| Exhaust manifold | No.1 exhaust manifold heat insulator to Exhaust manifold | 12 | 9 |
|
|
|
| Exhaust manifold | No.2 exhaust heat insulator to Exhaust manifold | 9 | 7 |
|
|
|
| Exhaust manifold | No.1 and No.2 manifold stay to Cylinder block and exhaust manifold | 44 | 32 |
|
|
|
| Exhaust manifold | No.2 manifold stay to Exhaust manifold | 34 | 25 |
|
|
|
| Exhaust manifold | No.2 manifold stay to Cylinder block | 34 | 25 |
|
|
|
| Exhaust manifold | Front exhaust pipe assembly to Exhaust manifold | 43 | 32 |
|
|
|
| Exhaust manifold | Exhaust manifold LH to Front exhaust pipe assembly | 62 | 46 |
|
|
|
| Exhaust manifold | No.1 front exhaust pipe support bracket to No.1 exhaust pipe support bracket stay | 21 | 15 |
|
|
|
| Exhaust manifold | Center exhaust pipe assembly to Front exhaust pipe assembly | 43 | 32 |
|
|
|
| Exhaust manifold | Front exhaust pipe assembly to Center exhaust pipe assembly | 43 | 32 |
|
|
|
| Exhaust manifold | Exhaust manifold RH to Center exhaust pipe assembly | 62 | 46 |
|
|
|
| Exhaust manifold | Tailpipe assembly to Center exhaust pipe assembly | 43 | 32 |
|
|
|
| Exhaust manifold | Center exhaust pipe assembly to Tailpipe assembly | 43 | 32 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Disc brake | Front brake cylinder to Cylinder mounting | 34 | 25 |
|
|
|
| Disc brake | Rear brake cylinder to Cylinder mounting | 27 | 20 |
|
|
|
| Disc brake | Front brake cylinder mounting to Knuckle | 98 | 72 |
|
|
|
| Disc brake | Rear brake cylinder mounting to Carrier | 88 | 65 |
|
|
|
| Disc brake | Front brake bleeder plug | 8 | 6 |
|
|
|
| Disc brake | Rear brake bleeder plug | 8 | 6 |
|
|
|
| Brake line | Front brake flexible hose to Cylinder | 29 | 21 |
|
|
|
| Brake line | Rear brake flexible hose to Cylinder | 30 | 22 |
|
|
|
| Brake line | Front brake flexible hose clamp bolt | 19 | 14 |
|
|
|
| Brake line | Front brake flexible hose to Brake tube | 15 | 11 | Without SST |
|
|
| Brake line | Front brake flexible hose to Brake tube | 14 | 10 | With SST |
|
|
| Brake line | Rear brake flexible hose to Brake tube | 15 | 11 | Without SST |
|
|
| Brake line | Rear brake flexible hose to Brake tube | 14 | 10 | With SST |
|
|
| Brake booster | Brake booster push rod clevis lock nut | 26 | 19 |
|
|
|
| Brake booster | Brake booster to Brake pedal support | 13 | 10 |
|
|
|
| Brake pedal | Brake pedal support to Body | 13 | 10 |
|
|
|
| Brake pedal | Brake pedal support to Instrument panel reinforcement | 25 | 18 |
|
|
|
| Brake pedal | Accelerator pedal to Body | 5 | 4 |
|
|
|
| Brake pedal | Accelerator pedal rod to Body | 5 | 4 |
|
|
|
| Master cylinder | Brake master cylinder to Brake booster | 13 | 10 |
|
|
|
| Master cylinder | Brake master cylinder to Brake tube | 15 | 11 | Without SST |
|
|
| Master cylinder | Brake master cylinder to Brake tube | 14 | 10 | With SST |
|
|
| Parking brake | Parking brake switch mounting screw | 1 | 1 |
|
|
|
| Parking brake | Parking brake lever to Body | 15 | 11 |
|
|
|
| Parking brake | No.1 parking brake cable lock nut | 6 | 4 |
|
|
|
| Parking brake | Parking brake cable to Backing plate | 8 | 6 |
|
|
|
| Parking brake | Parking brake cable clamp bolt | 6 | 4 |
|
|
|
| Parking brake | Parking brake cable assembly No.2 to Body bolt | 6 | 4 |
|
|
|
| Parking brake | Parking brake cable assembly No.2 to Body nut | 9 | 7 |
|
|
|
| ABS | ABS and traction actuator to Brake actuator bracket | 5 | 4 |
|
|
|
| ABS | ABS and traction actuator with bracket to Body | 19 | 14 |
|
|
|
| ABS | ABS and traction actuator to Brake tube | 15 | 11 | Without SST |
|
|
| ABS | ABS and traction actuator to Brake tube++ | 14 | 10 | With SST |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Front wheel | 103 | 76 |
|
|
|
| Wheels | Rear wheel | 103 | 76 |
|
|
|
| Struts | Shock strut piston rod nut | 47 | 35 | Use a drive socket #19. Use a torque wrench. |
|
|
| Struts | Shock strut lower fastener to steering knuckle | 240 | 177 | Use a drive socket #22. Use a combination spanner. Use a torque wrench. |
|
|
| Shock absorbers/shocks | Front shock absorber to Steering knuckle | 240 | 177 |
|
|
|
| Shock absorbers/shocks | Rear shock absorber to Rear axle carrier | 80 | 59 |
|
|
|
| Shock absorbers/shocks | Front shock absorber nut to Piston rod | 47 | 35 |
|
|
|
| Shock absorbers/shocks | Front shock absorber with coil spring to Body | 50 | 37 |
|
|
|
| Shock absorbers/shocks | Front shock absorber to Front speed sensor wire | 19 | 14 |
|
|
|
| Shock absorbers/shocks | Shock absorber lower fastener | 80 | 59 | Use a combination spanner #17. Use a torque wrench. |
|
|
| Shock absorbers/shocks | Top shock absorber fastener | 80 | 59 | Use a combination spanner #17 (2 pieces). Use a torque wrench. |
|
|
| Shock absorbers/shocks | Lower shock absorber fastener | 80 | 59 | Use a combination spanner #17. Use a torque wrench. |
|
|
| Shock absorbers/shocks | Shock absorber strut mount upper fastener | 50 | 37 | Use a drive socket #14. Use a torque wrench. |
|
|
| Stabilizer bar | Rear stabilizer bracket to Rear suspension member | 60 | 44 |
|
|
|
| Sway bar links/Stabilizer links | Front shock absorber to Stabilizer link | 74 | 55 |
|
|
|
| Sway bar links/Stabilizer links | Rear stabilizer bar to Rear stabilizer link | 74 | 55 |
|
|
|
| Sway bar links/Stabilizer links | Rear suspension No.2 arm to Rear stabilizer link | 30 | 22 |
|
|
|
| Control arm | Suspension arm locknut | 55 | 41 | Use a combination spanner #27. Use a torque wrench. |
|
|
| Control arm | Steering knuckle to Suspension lower No.1 arm | 92 | 68 |
|
|
|
| Control arm | Rear axle carrier to Rear suspension No.1 arm | 100 | 74 |
|
|
|
| Control arm | Rear axle carrier to Rear suspension No.2 arm | 90 | 66 |
|
|
|
| Control arm | Rear upper control arm to Rear suspension member | 90 | 66 |
|
|
|
| Control arm | Rear upper control arm to Rear axle carrier | 90 | 66 |
|
|
|
| Control arm | Front suspension crossmember to Lower No.1 arm | 223 | 164 |
|
|
|
| Control arm | Rear suspension member to Rear suspension No.2 arm | 90 | 66 |
|
|
|
| Control arm | Control arm front fastener to subframe | 175 | 129 | Use a drive socket #22. Use a torque wrench. |
|
|
| Control arm | Control arm rear fastener to subframe | 214 | 158 | Use a combination spanner #19. Use a drive socket #22. Use a torque wrench. |
|
|
| Control arm | Control arm fastener to stub axle | 90 | 66 | Use a drive socket #17. Use a torque wrench. |
|
|
| Trailing arm | Rear trailing arm to Body (front side) | 150 | 111 |
|
|
|
| Trailing arm | Rear trailing arm to Body (rear side) | 200 | 148 |
|
|
|
| Trailing arm | No.2 parking brake cable to Trailing arm | 6 | 4 |
|
|
|
| Ball joint | Steering knuckle to Lower ball joint | 133 | 98 |
|
|
|
| Ball joint | Front suspension lower arm to Lower ball joint | 92 | 68 |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Elise240SX - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 1 👎 6
