Toyota Corolla E110 (1995-2004) Torque Spec Settings

Mytho88, CC BY-SA 3.0, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Corolla E110 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E110
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front brake caliper mounting bracket bolts | 88 | 65 |
|
![]() |
|
Wheels | Wheel nuts | 103 | 76 |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1995 - 2004
- Generation: 8
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil sump bolts | 5 | 4 | Non-VVT-i engines |
|
![]() |
Oil pump | Oil pump bolts | 21 | 15 | Non-VVT-i engines |
|
![]() |
Oil pump | Oil pick-up/strainer nuts/bolts | 10 | 7 | Non-VVT-i engines |
|
![]() |
Piston rods | Connecting rod | 29 | 21 | Stage 1, Non-VVT-i engines |
|
![]() |
Cylinder head | Cylinder head bolts | 29 | 21 | Stage 1, Non-VVT-i engines |
|
![]() |
Throttle body | Throttle body mounting bolts/nuts | 22 | 16 | Non-VVT-i engines |
|
![]() |
Engine mounts | Engine/Transmission stiffener bolts | 22 | 16 |
|
![]() |
|
Camshaft | Camshaft sprocket bolt | 59 | 44 | Non-VVT-i engines |
|
![]() |
Crankshaft | Crankshaft pulley to Crankshaft bolt | 118 | 87 | Non-VVT-i engines |
|
![]() |
Crankshaft | Crankshaft oil seal retainer bolts | 10 | 7 | Non-VVT-i engines |
|
![]() |
Belt tensioner/Timing chains | Idler pulley bolts | 37 | 27 | Non-VVT-i engines |
|
![]() |
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Flywheel/Flex plate | Flywheel bolts | 78 | 58 | Non-VVT-i engines |
|
![]() |
Flywheel/Flex plate | Driveplate bolts | 64 | 47 | Non-VVT-i engines |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold nuts/bolts | 34 | 25 | Non-VVT-i engines |
|
![]() |
Exhaust manifold | Exhaust manifold brace bolts | 59 | 44 | Non-VVT-i engines |
|
![]() |
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|

Kevauto, CC BY-SA 4.0, via Wikimedia Commons
Did you find the answer to your specific question?
👍 0 👎 3