Toyota Corolla E160 (2012-2019) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Corolla E160 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E160
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan4 | Oil pan drain plug | 20.3 | 15 |
|
||
Intake manifold | Spark plugs | 19 | 14 |
|
||
Spark plugs | Intake manifold | 28.5 | 21 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2012 - 2019
- Generation: 11
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil pan bolts | 12.2 | 9 |
|
||
Oil pan4 | Oil pan drain plug | 20.3 | 15 |
|
||
Cylinder head | Cylinder head bolts | 48.8 | 36 |
|
||
Intake manifold | Spark plugs | 19 | 14 |
|
||
Spark plugs | Intake manifold | 28.5 | 21 |
|
||
Engine mounts | Motor mount (Engine side) | 80 | 59 |
|
||
Engine mounts | Motor mount (Frame side) | 47.5 | 35 |
|
||
Alternator | Alternator to engine | 24.4 | 18 |
|
||
Camshaft | Camshaft sprocket bolts | 54.2 | 40 |
|
||
Camshaft | Camshaft bearing caps | 16.3 | 12 |
|
||
Camshaft | Camshaft bearing cap No.1 | 27.1 | 20 |
|
||
Valve cover | Valve cover bolts | 10.8 | 8 |
|
||
Water pump | Water pump / pulley | 10.8 | 8 |
|
||
Belt tensioner | Belt tensioner pulley | 69.1 | 51 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Transmission pan bolts | 8.1 | 6 |
|
||
Transmission fluid pan | Transmission drain plug | 20.3 | 15 |
|
||
Wheel hub assembly | Rear wheel hub bolts | 101.7 | 75 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Inner tie rod end | 88.1 | 65 |
|
||
Tie rod end | Outer tie rod end | 48.8 | 36 |
|
||
Power steering pump | Power steering to engine | 36.6 | 27 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold bolts | 36.6 | 27 |
|
||
Exhaust manifold | Exhaust manifold to pipe | 40.7 | 30 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Brake caliper | Brake caliper bracket | 90.8 | 67 |
|
||
Disc brake | Front caliper | 33.9 | 25 |
|
||
Disc brake | Front caliper bracket | 107.1 | 79 |
|
||
Disc brake | Front caliper banjo bolt | 29.8 | 22 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Wheel axle nut | 215.6 | 159 |
|
||
Control arm | Lower control arm to ball joint | 89.5 | 66 |
|
||
Control arm | Rear control arms | 183 | 135 |
|
||
Ball joint | Front lower ball joint to arm | 89.5 | 66 |
|
||
Ball joint | Front lower ball joint to knuckle nut | 103 | 76 |
|
||
Ball joint | Front lower arm frame bolts | 136.9 | 101 |
|
||
Struts | Rear strut upper nuts | 39.3 | 29 |
|
||
Struts | Rear strut lower bolts | 142.4 | 105 |
|
||
Struts | Upper strut nuts | 39.3 | 29 |
|
||
Struts | Lower strut bolts | 225.1 | 166 |
|
||
Sway bar links/Stabilizer links | Rear swaybar endlinks | 44.7 | 33 |
|
||
Stabilizer bar | Stabilizer links | 74.6 | 55 |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 2