Toyota Camry XV40 (2007-2011) Torque Spec Settings
By OSX - Own work, Public Domain
Below you'll find the tightening torques for the Toyota Camry XV40 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Camry XV40
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug | 40 | 30 |
|
|
|
| Oil filter | Oil filter cap | 25 | 18 |
|
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Water pump | Water pump pulley bolts | 21 | 15 |
|
|
|
| Wheel hub assembly | Front axle hub nut | 294 | 217 |
|
|
|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 39 | 29 |
|
|
|
| Transmission fluid pan | Drain plug | 49 | 36 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2011
- Generation: 6
- Type of van: car
- Model variant: XV40
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan drain plug | 40 | 30 |
|
|
|
| Oil pan | Oil pan subassembly stud bolts | 10 | 7 |
|
|
|
| Oil pan | No.1 oil pan baffle plate bolts | 10 | 7 |
|
|
|
| Oil filter | Oil filter cap | 25 | 18 |
|
|
|
| Oil dipstick | Oil level gauge guide bolts | 21 | 15 |
|
|
|
| Cylinder head | Cylinder head cover bolts | 21 | 15 | Bolt A |
|
|
| Cylinder head | Cylinder head cover bolts | 10 | 7 |
|
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Intake manifold | Intake manifold to Cylinder heads bolts and nuts | 21 | 15 |
|
|
|
| Throttle body | Throttle body bolts | 10 | 7 |
|
|
|
| Engine mounts | Engine mount bracket RH bolts | 54 | 40 |
|
|
|
| Engine mounts | No.1 left front engine mounting bracket bolts | 54 | 40 |
|
|
|
| Sensor | Engine coolant temperature sensor | 220 | 162 |
|
|
|
| Sensor | Crankshaft position sensors bolts | 10 | 7 |
|
|
|
| Sensor | Heated oxygen sensors | 44 | 32 |
|
|
|
| Sensor | Knock control sensors bolts | 20 | 15 |
|
|
|
| Sensor | VVT sensors | 10 | 7 |
|
|
|
| Alternator | Generator assembly to Cylinder block bolt | 20 | 15 |
|
|
|
| Alternator | Generator assembly bracket bolt | 20 | 15 |
|
|
|
| Alternator | Generator wire nut | 10 | 7 |
|
|
|
| Starter | Starter assembly bolts | 37 | 27 |
|
|
|
| Battery | Ignition coil bolts | 8 | 6 |
|
|
|
| Camshaft | Camshaft bearing cap bolts | 10 | 7 |
|
|
|
| Camshaft | Camshaft bolts | 16 | 12 |
|
|
|
| Camshaft | Camshaft housing bolts | 28 | 21 |
|
|
|
| Crankshaft | Crankshaft pulley bolt | 250 | 184 |
|
|
|
| Crankshaft | No.1 chain vibration damper bolts | 23 | 17 |
|
|
|
| Water pump | Water pump assembly bolts | 21 | 15 | Bolt A |
|
|
| Water pump | Water pump assembly bolts | 9 | 7 | Bolts B and C |
|
|
| Water pump | Water pump pulley bolts | 21 | 15 |
|
|
|
| Coolant expansion tank | No.1 surge tank stay bolt | 21 | 15 |
|
|
|
| Coolant expansion tank | No.1 surge tank stay bolt and clamp | 7 | 5 |
|
|
|
| Radiator | Water inlet nuts | 10 | 7 |
|
|
|
| Air conditioning | Compressor and magnetic clutch bolts | 25 | 18 |
|
|
|
| Air conditioning | Condenser assembly bolts | 5 | 4 |
|
|
|
| Belt tensioner/Timing chains | No.1 chain tensioner assembly bolts | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | No.2 chain tensioner assembly bolt | 21 | 15 |
|
|
|
| Belt tensioner/Timing chains | No.3 chain tensioner assembly bolt | 21 | 15 |
|
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner assembly bolt | 43 | 32 |
|
|
|
| Belt tensioner/Timing chains | Idler pulley subassemblies bolts | 43 | 32 |
|
|
|
| Fuel system | Fuel delivery pipe to Intake manifold bolts | 21 | 15 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Torque converter | Torque converter set bolts | 41 | 30 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Power steering pump | Vane pump assembly bolts | 43 | 32 |
|
|
|
| Power steering pump | Vane pump assembly bolts | 29 | 21 | For use with SST |
|
|
| Power steering pump | Vane pump assembly union bolt | 50 | 37 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold subassembly nuts | 21 | 15 |
|
|
|
| Exhaust manifold | No.1 exhaust pipe support bracket bolts | 21 | 15 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By OSX - Own work, Public Domain
Did you find the answer to your specific question?
👍 1 👎 1
