Toyota Highlander XU40 (2007-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota Highlander XU40 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Highlander XU40
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Drain plug | 49 | 36 |
|
|
|
| Wheel hub assembly | Front axle hub nut | 294 | 217 |
|
|
|
| Wheel hub assembly | Front axle hub nut | 294 | 217 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2012
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pump | Oil pump body to Stator shaft assembly | 10 | 7 |
|
|
|
| Sensor | Speed sensor (NC) to Transaxle | 11 | 8 |
|
|
|
| Sensor | Speed sensor (NT) to Transaxle | 11 | 8 |
|
|
|
| Sensor | ATF temperature sensor to Valve body | 7 | 5 |
|
|
|
| Fuel/Oil cooler | Oil cooler assembly to Body nut | 7 | 5 |
|
|
|
| Fuel/Oil cooler | Oil cooler assembly to Body bolt | 7 | 5 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Control cable bracket | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet tube to Transaxle | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet tube to Transaxle | 34 | 25 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel housing under cover to Automatic transaxle | 10 | 7 |
|
|
|
| Transmission fluid pan | Drain plug to Oil pan | 49 | 36 |
|
|
|
| Transmission fluid pan | Drain plug to Automatic transaxle oil pan sub-assembly | 49 | 36 |
|
|
|
| Transmission fluid pan | Oil pan to Transaxle | 8 | 6 |
|
|
|
| Transmission fluid pan | Oil filler tube to Transaxle | 6 | 4 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block bolt | 64 | 47 | Bolt A |
|
|
| Transmission mount/case | Transaxle housing to Engine block bolt | 46 | 34 | Bolt B |
|
|
| Transmission mount/case | Transaxle housing to Engine block bolt | 43 | 32 | Bolt C |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 25 | 18 | Bolt A |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 33 | 24 | Bolt B |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 29 | 21 | Bolt C |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 28 | 21 | Bolt D |
|
|
| Transmission mount/case | Transaxle apply tube clamp to Transaxle housing | 10 | 7 |
|
|
|
| Transmission mount/case | Brake apply tube clamp to Transaxle case | 5 | 4 |
|
|
|
| Transmission mount/case | Transaxle case No.1 plug to Transaxle rear cover | 7 | 5 |
|
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 19 | 14 | Bolt A |
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 25 | 18 | Other bolt |
|
|
| Transmission mount/case | Pawl shaft clamp to Transaxle case | 10 | 7 |
|
|
|
| Transmission mount/case | Oil pump assembly to Transaxle case | 22 | 16 |
|
|
|
| Transmission mount/case | Automatic transmission case plug to Transaxle housing | 7 | 5 |
|
|
|
| Transmission mount/case | Automatic transmission case plug to Transaxle case | 7 | 5 |
|
|
|
| Transmission mount/case | Parking lock pawl bracket to Transaxle case | 20 | 15 |
|
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 20 | 15 | Bolt A |
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 12 | 9 | Bolt B |
|
|
| Transmission mount/case | Transmission wire to Transaxle housing | 5 | 4 |
|
|
|
| Transmission mount/case | Transmission valve body to Transaxle case | 11 | 8 |
|
|
|
| Transmission mount/case | ATF temperature sensor clamp to Transmission valve body | 7 | 5 |
|
|
|
| Transmission mount/case | Valve body oil strainer assembly to Transmission valve body | 11 | 8 |
|
|
|
| Transmission mount/case | Automatic transaxle oil pan sub-assembly to Transaxle case | 8 | 6 |
|
|
|
| Torque converter | Torque converter clutch to Drive plate | 41 | 30 |
|
|
|
| Transfer | Transmission control cable to Control shaft lever | 12 | 9 |
|
|
|
| Transfer | No.1 transmission control cable bracket to Transaxle | 12 | 9 |
|
|
|
| Transfer | No.2 transmission control cable bracket to Transaxle | 12 | 9 |
|
|
|
| Transfer | Control shaft lever to Control shaft | 13 | 10 |
|
|
|
| Transfer | Control cable to Body | 5 | 4 |
|
|
|
| Transfer | Shift lever assembly to Body | 12 | 9 |
|
|
|
| Transfer | Park/Neutral start switch nut | 7 | 5 |
|
|
|
| Transfer | Park/Neutral start switch bolt | 5 | 4 |
|
|
|
| Transfer | Park/Neutral start switch to Control shaft lever | 13 | 10 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Randy Stern from Minneapolis, MN, USA - 2008 Toyota Highlander 2, CC BY 2.0
Did you find the answer to your specific question?
👍 0 👎 3
