Toyota Highlander XU40 (2007-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota Highlander XU40 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Highlander XU40
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Drain plug | 49 | 36 |
|
|
|
| Wheel hub assembly | Front axle hub nut | 294 | 217 |
|
|
|
| Wheel hub assembly | Front axle hub nut | 294 | 217 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2012
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Overflow plug to Oil pan | 40 | 30 |
|
|
|
| Transmission fluid pan | Refill plug to Transaxle case | 49 | 36 |
|
|
|
| Transmission fluid pan | No.1 transmission oil filler tube to Oil pan | 1 | 1 |
|
|
|
| Transmission mount/case | Automatic transaxle assembly to Engine assembly bolt | 64 | 47 | Bolt A |
|
|
| Transmission mount/case | Automatic transaxle assembly to Engine assembly bolt | 46 | 34 | Bolt B |
|
|
| Transmission mount/case | Automatic transaxle assembly to Engine assembly bolt | 44 | 32 | Bolt C |
|
|
| Transmission mount/case | Transmission valve body assembly to Transaxle case bolts | 11 | 8 | Bolts A, B and C |
|
|
| Transmission mount/case | Transmission valve body assembly to Transaxle case bolt | 10 | 7 | Bolt D |
|
|
| Transmission mount/case | Valve body oil strainer assembly to Transmission valve body assembly | 10 | 7 |
|
|
|
| Transmission mount/case | Automatic transaxle oil pan sub-assembly to Transaxle case bolt | 8 | 6 | Uncoated bolt |
|
|
| Transmission mount/case | Automatic transaxle oil pan sub-assembly to Transaxle case bolt | 7 | 5 | Precoated bolt |
|
|
| Transfer | Transmission control cable assembly to Control shaft lever | 12 | 9 |
|
|
|
| Transfer | No.1 transmission control cable bracket to Transaxle case | 12 | 9 |
|
|
|
| Transfer | Control shaft lever to Control shaft | 13 | 10 |
|
|
|
| Transfer | Shift lever assembly to Body | 12 | 9 |
|
|
|
| Transfer | Park/Neutral position switch assembly to Transaxle case | 5 | 4 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Randy Stern from Minneapolis, MN, USA - 2008 Toyota Highlander 2, CC BY 2.0
Did you find the answer to your specific question?
👍 0 👎 3
