Toyota Hilux 8 (2015-on) Torque Spec Settings
EurovisionNim, CC BY-SA 4.0, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Hilux 8 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Hilux 8
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2015 - present
- Generation: 8
- Type of van: pickup
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transfer | Filler plug to Transfer assembly | 37 | 27 |
|
|
|
| Transfer | Drain plug to Transfer assembly | 37 | 27 |
|
|
|
| Transfer | Transfer case lower protector to Transfer assembly | 18 | 13 |
|
|
|
| Transfer | Ground wire to Transfer assembly | 20 | 15 |
|
|
|
| Transfer | Automatic transmission assembly to Transfer assembly | 24 | 18 |
|
|
|
| Transfer | Manual transmission assembly to Transfer assembly | 24 | 18 |
|
|
|
| Transfer | Transfer case cover sub-assembly to Front transfer case | 18 | 13 |
|
|
|
| Transfer | Output shaft companion flange sub-assembly to Transfer drive sprocket (for front side) | 118 | 87 |
|
|
|
| Transfer | Output shaft companion flange sub-assembly to Rear transfer output shaft (for rear side) | 127 | 94 |
|
|
|
| Transfer | Transfer extension housing to Rear transfer case | 12 | 9 |
|
|
|
| Transfer | Transfer case plug to Front transfer case | 19 | 14 |
|
|
|
| Transfer | No.1 transfer case plug (filler plug) to Rear transfer case | 37 | 27 |
|
|
|
| Transfer | Transfer drain plug to Rear transfer case | 37 | 27 |
|
|
|
| Transfer | Rear transfer case to Front transfer case | 28 | 21 |
|
|
|
| Transfer | Transfer oil separator sub-assembly to Front transfer case | 8 | 6 |
|
|
|
| Transfer | Transfer oil pump body sub-assembly to Front transfer case | 8 | 6 |
|
|
|
| Transfer | Transfer front bearing retainer sub-assembly to Front transfer case | 12 | 9 |
|
|
|
| Transfer | Shift detent ball spring plug to No.1 transfer gear shift fork | 19 | 14 |
|
|
|
| Transfer | Shift detent ball spring plug to No.2 transfer gear shift fork | 19 | 14 |
|
|
|
| Transfer | Transfer shift shaft stopper to Rear transfer case | 19 | 14 |
|
|
|
| Transfer | Transfer shift actuator assembly to Rear transfer case | 20 | 15 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Vauxford - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 2 👎 2
_SR5_4-door_utility_(2018-09-03)_01.jpg){kind=link}