Toyota 4Runner 5 (2010-on) Torque Spec Settings
Below you'll find the tightening torques for the Toyota 4Runner 5 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota 4Runner 5
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2010 - present
- Generation: 5
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transfer | Drain plug to Transfer assembly | 37 | 27 |
|
||
Transfer | Drain plug to Transfer assembly | 37 | 27 |
|
||
Transfer | Filler plug to Transfer assembly | 37 | 27 |
|
||
Transfer | Filler plug to Transfer assembly | 37 | 27 |
|
||
Transfer | Transfer case plug to Front transfer case | 19 | 14 |
|
||
Transfer | Transfer case plug to Front transfer case | 19 | 14 |
|
||
Transfer | Transfer oil pump body sub-assembly to Front transfer case | 8 | 6 |
|
||
Transfer | Transfer oil separator sub-assembly to Front transfer case | 8 | 6 |
|
||
Transfer | Oil separator sub-assembly to Rear transfer case | 8 | 6 |
|
||
Transfer | Rear transfer case to Front transfer case | 28 | 21 |
|
||
Transfer | Front transfer case to Rear transfer case | 28 | 21 |
|
||
Transfer | Transfer extension housing sub-assembly to Rear transfer case | 12 | 9 |
|
||
Transfer | Transfer extension housing sub-assembly to Case rear | 12 | 9 |
|
||
Transfer | Transfer case cover sub-assembly to Front case | 18 | 13 |
|
||
Transfer | Transfer to Transfer adaptor | 24 | 18 |
|
||
Transfer | Transfer output shaft companion flange | 118 | 87 |
|
||
Transfer | Companion flange sub-assembly lock nut | 118 | 87 |
|
||
Transfer | Transfer control shift lever retainer sub-assembly to Front transfer case | 18 | 13 |
|
||
Transfer | Transfer bearing retainer sub-assembly to Front transfer case | 12 | 9 |
|
||
Transfer | Transfer RH bearing retainer sub-assembly to Front case | 12 | 9 |
|
||
Transfer | Transfer indicator switch to Front transfer case | 37 | 27 |
|
||
Transfer | Transfer assembly to Transmission assembly | 24 | 18 |
|
||
Transfer | No.2 transfer gear shift fork to Transfer shift actuator assembly | 24 | 18 |
|
||
Transfer | Center differential lock fork sub-assembly to Transfer shift actuator assembly | 24 | 18 |
|
||
Transfer | Transfer shift actuator assembly to Rear transfer case | 20 | 15 |
|
||
Drive/Axle shaft | Front axle shaft to Front axle shaft nut | 235 | 173 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Steering knuckle | Front axle with ABS rotor bearing assembly to Steering knuckle | 80 | 59 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Front wheel to Front axle hub | 112 | 83 |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 0 👎 0