Toyota Camry XV10 (1992-1996) Torque Spec Settings

By Jason Lawrence from New York - Toyota Camry, CC BY 2.0
Below you'll find the tightening torques for the Toyota Camry XV10 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Camry XV10
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drain plug | 49 | 36 |
|
![]() |
|
Wheel hub assembly | Front axle hub nut | 294 | 217 |
|
![]() |
|
Transmission fluid pan | Drain plug | 49 | 36 |
|
![]() |
|
Steering wheel | Steering wheel | 35 | 26 |
|
![]() |
|
Wheels | Front wheel | 103 | 76 |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1992 - 1996
- Generation: 3
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drain plug | 49 | 36 |
|
![]() |
|
Oil pan | Oil pan | 5 | 4 |
|
![]() |
|
Oil filter | Oil strainer bolts | 10 | 7 |
|
![]() |
|
Throttle body | Throttle cable to Engine nuts | 15 | 11 |
|
![]() |
|
Engine mounts | Front side engine mounting bolts | 80 | 59 |
|
![]() |
|
Engine mounts | Rear side engine mounting nuts | 66 | 49 |
|
![]() |
|
Starter | Starter bolts | 39 | 29 |
|
![]() |
|
Valve cover | Manual valve body bolts | 10 | 7 |
|
![]() |
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Flywheel/Flex plate | Drive plate bolts | 83 | 61 |
|
![]() |
|
Transmission mount/case | Transaxle to Engine bolts | 46 | 34 | 10mm head bolt |
|
![]() |
Transmission mount/case | Transaxle to Engine bolts | 64 | 47 | 12mm head bolt |
|
![]() |
Transmission mount/case | Transaxle mounting bolts | 52 | 38 |
|
![]() |
|
Transmission mount/case | Transaxle rear cover to Transaxle case | 37 | 27 |
|
![]() |
|
Transmission mount/case | Detent spring to Manual valve body | 10 | 7 |
|
![]() |
|
Torque converter | Torque converter clutch mounting bolts | 27 | 20 |
|
![]() |
|
Transfer | Park/Neutral position switch to Transaxle case bolt | 5 | 4 |
|
![]() |
|
Transfer | Park/Neutral position switch nut | 7 | 5 |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Steering rack | Steering gear housing to Front frame assembly bolts and nuts | 181 | 133 |
|
![]() |
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust pipe nuts | 62 | 46 |
|
![]() |
|
Exhaust manifold | Rear exhaust pipe bolts and nuts | 103 | 76 |
|
![]() |
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Stabilizer bar | Stabilizer bar bushing bracket bolts | 19 | 14 |
|
![]() |
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|

M.rJirapat, CC BY-SA 4.0, via Wikimedia Commons
Did you find the answer to your specific question?
👍 2 👎 0