Toyota Camry XV20 (1996-2002) Torque Spec Settings
OSX, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Camry XV20 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Camry XV20
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Front wheel | 103 | 76 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1996 - 2002
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan to Drain plug | 37 | 27 |
|
|
|
| Oil pan | Oil pan to Cylinder block | 5 | 4 |
|
|
|
| Oil pan | Oil pan to Oil pump | 5 | 4 |
|
|
|
| Oil filter | Oil strainer to Engine balancer | 5 | 4 |
|
|
|
| Oil pump | Oil pump to Cylinder block | 9 | 7 |
|
|
|
| Oil pump | Oil pump body cover to Oil pump body | 9 | 7 |
|
|
|
| Oil pump | Oil pump pulley to Oil pump drive shaft | 24 | 18 |
|
|
|
| Oil pump | Oil strainer to Oil pump | 5 | 4 |
|
|
|
| Piston rods | Connecting rod cap to Connecting rod | 25 | 18 | Step 1 |
|
|
| Cylinder head | Cylinder head to Cylinder block | 49 | 36 | Step 1 |
|
|
| Cylinder head | Water bypass pipe to Cylinder head | 19 | 14 |
|
|
|
| Cylinder head | Water outlet to Cylinder head | 15 | 11 |
|
|
|
| Cylinder head | LH engine hanger to Cylinder head | 25 | 18 |
|
|
|
| Cylinder head | Delivery pipe to Cylinder head | 13 | 10 |
|
|
|
| Cylinder head | Cylinder head cover to Cylinder head | 44 | 32 |
|
|
|
| Spark plugs | Spark plug to Cylinder head | 18 | 13 |
|
|
|
| Spark plugs | Spark plug tube to Cylinder head | 49 | 36 |
|
|
|
| Intake manifold | Intake manifold to Cylinder head | 19 | 14 |
|
|
|
| Intake manifold | Intake manifold stay to Intake manifold | 39 | 29 |
|
|
|
| Intake manifold | No.2 intake manifold stay to Intake manifold | 42 | 31 |
|
|
|
| Intake manifold | Intake manifold stay to Stiffening plate | 39 | 29 |
|
|
|
| Intake manifold | No.2 intake manifold stay to Cylinder head | 21 | 15 |
|
|
|
| Throttle body | Throttle body to Intake manifold | 19 | 14 |
|
|
|
| Engine block | Cylinder block to Drain plug | 25 | 18 |
|
|
|
| Engine block | No.1 rear end plate to Cylinder block | 9 | 7 |
|
|
|
| Engine block | No.2 rear end plate to Cylinder block | 9 | 7 |
|
|
|
| Engine block | RH stiffener plate to Cylinder block | 39 | 29 |
|
|
|
| Engine block | Engine balancer to Cylinder block | 49 | 36 |
|
|
|
| Engine block | Rear oil seal retainer to Cylinder block | 13 | 10 |
|
|
|
| Engine mounts | No.2 RH engine mounting bracket to Cylinder block | 52 | 38 |
|
|
|
| Engine mounts | No.2 RH engine mounting bracket to Generator bracket | 52 | 38 |
|
|
|
| Engine mounts | Front engine mounting insulator to Cylinder block | 64 | 47 |
|
|
|
| Engine mounts | Rear engine mounting insulator to Cylinder block | 64 | 47 |
|
|
|
| Engine mounts | Engine moving control rod to No.2 RH engine mounting bracket | 64 | 47 |
|
|
|
| Engine mounts | Engine moving control rod to Body | 64 | 47 |
|
|
|
| Engine mounts | Front engine mounting insulator to Front frame | 80 | 59 | TMC made |
|
|
| Engine mounts | Front engine mounting insulator to Front frame | 44 | 32 | TMMK made for silver color |
|
|
| Engine mounts | Front engine mounting insulator to Front frame | 66 | 49 | TMMK made for green color |
|
|
| Engine mounts | Rear engine mounting insulator to Front frame | 66 | 49 |
|
|
|
| Engine mounts | LH engine mounting insulator to Front frame | 80 | 59 |
|
|
|
| Engine mounts | LH engine mounting insulator to Transaxle | 64 | 47 |
|
|
|
| Sensor | Knock sensor 1 to Cylinder block | 44 | 32 |
|
|
|
| Sensor | Oxygen sensor (bank 1 sensor 1) to Exhaust manifold | 44 | 32 |
|
|
|
| Sensor | Oxygen sensor (bank 1 sensor 2) to Front exhaust pipe | 44 | 32 |
|
|
|
| Sensor | A/F sensor to Exhaust manifold | 44 | 32 |
|
|
|
| Sensor | Camshaft position sensor assembly to Cylinder head | 10 | 7 |
|
|
|
| Sensor | Crankshaft position sensor to Oil pump | 10 | 7 |
|
|
|
| Alternator | RH engine hanger to Generator bracket | 25 | 18 |
|
|
|
| Alternator | Generator to Generator bracket | 52 | 38 |
|
|
|
| Alternator | Generator bracket to Cylinder head | 42 | 31 |
|
|
|
| Alternator | Generator pulley to Rotor | 111 | 82 |
|
|
|
| Alternator | Generator drive belt adjusting bar to Cylinder block | 22 | 16 |
|
|
|
| Alternator | Generator to Adjusting bar | 18 | 13 |
|
|
|
| Starter | Starter mounting bolt | 37 | 27 |
|
|
|
| Starter | Starter housing to Magnetic switch | 6 | 4 |
|
|
|
| Starter | Lead wire to Terminal C of starter | 6 | 4 |
|
|
|
| Starter | Terminal nut to Terminal C of starter | 17 | 13 |
|
|
|
| Starter | Terminal nut to Terminal 30 of starter | 17 | 13 |
|
|
|
| Battery | Oil pan to Drain plug | 37 | 27 |
|
|
|
| Camshaft | Camshaft timing pulley to Camshaft | 54 | 40 |
|
|
|
| Camshaft | Camshaft timing pulley to Camshaft | 37 | 27 | For use with SST |
|
|
| Camshaft | Camshaft bearing cap to Cylinder head | 19 | 14 |
|
|
|
| Crankshaft | Crankshaft pulley to Crankshaft | 108 | 80 |
|
|
|
| Crankshaft | Main bearing cap to Cylinder block | 59 | 44 |
|
|
|
| Water pump | Water pump to Water pump cover and cylinder block | 9 | 7 |
|
|
|
| Water pump | Water bypass pipe to Water pump cover | 9 | 7 |
|
|
|
| Water pump | Water inlet to Water pump cover | 9 | 7 |
|
|
|
| Fuel/Oil cooler | Oil cooler pipe to Oil cooler | 15 | 11 |
|
|
|
| Fuel/Oil cooler | Oil cooler to Cylinder block union bolt | 79 | 58 |
|
|
|
| Fuel/Oil cooler | Oil cooler to Cylinder block nut | 9 | 7 |
|
|
|
| Radiator | Upper radiator support to Body | 13 | 10 |
|
|
|
| Radiator | Electric cooling fan to Radiator | 5 | 4 |
|
|
|
| Radiator | Oil cooler to Radiator lower tank | 8 | 6 |
|
|
|
| Air conditioning | A/C compressor to Cylinder block | 26 | 19 |
|
|
|
| Belt tensioner/Timing chains | No.3 timing belt cover to Cylinder head | 8 | 6 |
|
|
|
| Belt tensioner/Timing chains | No.1 idler pulley to Cylinder head | 42 | 31 |
|
|
|
| Belt tensioner/Timing chains | No.2 idler pulley to Oil pump | 42 | 31 |
|
|
|
| Fuel system | Fuel inlet hose to Delivery pipe | 34 | 25 |
|
|
|
| Fuel system | Fuel inlet hose to Delivery pipe | 29 | 21 | For use with SST |
|
|
| Fuel system | Fuel inlet hose to Fuel filter | 29 | 21 |
|
|
|
| Fuel system | Fuel line | 29 | 21 | Union bolt type |
|
|
| Fuel system | Fuel line | 28 | 21 | Flare nut type, For use with SST |
|
|
| Fuel system | Fuel pump assembly to Fuel tank | 4 | 3 |
|
|
|
| Fuel system | Fuel filter to Fuel pump bracket | 2 | 1 |
|
|
|
| Fuel system | Fuel pressure regulator to Fuel pump bracket | 2 | 1 |
|
|
|
| Fuel system | Fuel tank band to Body | 39 | 29 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Clutch assembly | Release fork support | 39 | 29 |
|
|
|
| Flywheel/Flex plate | Flywheel to Crankshaft | 88 | 65 |
|
|
|
| Flywheel/Flex plate | Drive plate to Crankshaft | 83 | 61 |
|
|
|
| Transmission mount/case | Transaxle to Cylinder block | 46 | 34 | 14mm head |
|
|
| Transmission mount/case | Transaxle to Cylinder block | 64 | 47 | 17mm head |
|
|
| Transmission mount/case | Transaxle to Cylinder block | 66 | 49 |
|
|
|
| Transmission mount/case | RH stiffener plate to Transaxle | 39 | 29 |
|
|
|
| Transmission mount/case | LH stiffener plate to Transaxle | 37 | 27 |
|
|
|
| Transmission mount/case | LH stiffener plate to Transaxle | 42 | 31 |
|
|
|
| Torque converter | Drive plate to Torque converter clutch | 27 | 20 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Power steering | Power steering pump to Power steering pump bracket | 43 | 32 |
|
|
|
| Power steering | Power steering pump bracket to Cylinder block | 43 | 32 |
|
|
|
| Power steering | Clamp plate set nut | 10 | 7 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head | 49 | 36 |
|
|
|
| Exhaust manifold | No.1 exhaust manifold stay to Exhaust manifold | 42 | 31 |
|
|
|
| Exhaust manifold | No.1 exhaust manifold stay to Transaxle | 42 | 31 |
|
|
|
| Exhaust manifold | No.2 exhaust manifold stay to Exhaust manifold | 42 | 31 |
|
|
|
| Exhaust manifold | No.2 exhaust manifold stay and LH stiffener plate to Cylinder block | 58 | 43 | TMC made |
|
|
| Exhaust manifold | No.2 exhaust manifold stay and LH stiffener plate to Cylinder block | 42 | 31 | TMMK made |
|
|
| Exhaust manifold | Exhaust pipe bracket and No.2 rear end plate to Transaxle | 19 | 14 |
|
|
|
| Exhaust manifold | Front exhaust pipe to Exhaust manifold | 62 | 46 |
|
|
|
| Exhaust manifold | Front exhaust pipe to Center exhaust pipe | 56 | 41 |
|
|
|
| Exhaust manifold | Center exhaust pipe to Tailpipe | 56 | 41 |
|
|
|
| Exhaust manifold | Support bracket for front exhaust pipe to Exhaust pipe bracket on No.2 rear end plate | 33 | 24 |
|
|
|
| Exhaust manifold | Support bracket for front exhaust pipe to Front frame | 33 | 24 |
|
|
|
| Exhaust manifold | Support bracket for center exhaust pipe to Body | 19 | 14 |
|
|
|
| Exhaust manifold | Support bracket for tailpipe to Body | 33 | 24 |
|
|
|
| Exhaust manifold | Support stay for front exhaust pipe to Support bracket | 33 | 24 |
|
|
|
| EGR | EGR valve to Intake manifold | 13 | 10 |
|
|
|
| EGR | EGR valve to EGR pipe | 10 | 7 |
|
|
|
| EGR | EGR pipe to Cylinder head | 61 | 45 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By EurovisionNim - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 1 👎 0
_CSX_sedan.jpg){kind=link}