Toyota Camry XV20 (1996-2002) Torque Spec Settings
OSX, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Camry XV20 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Camry XV20
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Front wheel | 103 | 76 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1996 - 2002
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Ring gear to Differential case | 83 | 61 |
|
|
|
| Differential | Differential side bearing retainer | 18 | 13 |
|
|
|
| Clutch assembly | Clutch line bracket to Transaxle bolt | 12 | 9 | Bolt A |
|
|
| Clutch assembly | Clutch line bracket to Transaxle bolt | 7 | 5 | Bolt B |
|
|
| Clutch assembly | Clutch release cylinder to Transaxle | 12 | 9 |
|
|
|
| Clutch assembly | Clutch release fork support | 39 | 29 |
|
|
|
| Transmission fluid pan | Filler and drain plugs | 49 | 36 |
|
|
|
| Transmission mount/case | Transaxle to Engine | 46 | 34 | 14mm head |
|
|
| Transmission mount/case | Transaxle to Engine | 64 | 47 | 17mm head |
|
|
| Transmission mount/case | Engine mount bracket to Transaxle | 52 | 38 |
|
|
|
| Transmission mount/case | Transaxle case receiver set bolt | 7 | 5 |
|
|
|
| Transmission mount/case | Transmission case to Transaxle case | 29 | 21 |
|
|
|
| Transmission mount/case | Transmission case to Case cover | 29 | 21 |
|
|
|
| Transmission mount/case | Transmission case protector | 18 | 13 |
|
|
|
| Transmission mount/case | Selecting bellcrank to Transmission case | 37 | 27 |
|
|
|
| Transfer | Shift lever assembly to Body | 12 | 9 |
|
|
|
| Transfer | Shift cable grommet retainer to Body | 5 | 4 |
|
|
|
| Transfer | Control shaft cover | 37 | 27 |
|
|
|
| Transfer | Control shift lever to Lever shaft | 6 | 4 |
|
|
|
| Transfer | Reverse shift arm bracket | 18 | 13 |
|
|
|
| Transfer | No.3 shift fork to Shift fork shaft | 18 | 13 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust pipe bracket bolt | 19 | 14 |
|
|
|
| Exhaust manifold | Exhaust pipe bracket nut | 33 | 24 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Front wheel | 103 | 76 |
|
|
|
| Control arm | Front suspension member with lower suspension arm bolt | 181 | 133 | Bolt A |
|
|
| Control arm | Front suspension member with lower suspension arm bolt | 32 | 24 | Bolt B |
|
|
| Control arm | Front suspension member with lower suspension arm nut | 36 | 27 | Nut C |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By EurovisionNim - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 1 👎 0
_CSX_sedan.jpg){kind=link}