Toyota RAV4 XA30 (2005-2012) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota RAV4 XA30 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota RAV4 XA30
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheel hub assembly | Front axle hub nut | 216 | 159 | Ø26 |
|
|
| Wheel hub assembly | Front axle hub nut | 292 | 215 | Ø30 |
|
|
| Wheels | Front wheel | 103 | 76 |
|
|
|
| Wheels | Rear wheel | 103 | 76 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2012
- Generation: 3
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug to Oil pan | 47 | 35 |
|
|
|
| Oil filter | Oil strainer to Valve body | 11 | 8 |
|
|
|
| Oil feeder | Oil filler tube to Transaxle | 6 | 4 |
|
|
|
| Oil feeder | Oil filler tube to Front engine mounting bracket | 6 | 4 |
|
|
|
| Oil pump | Oil pump assembly to Transaxle case | 22 | 16 |
|
|
|
| Oil pump | Oil pump body to Stator shaft assembly | 10 | 7 |
|
|
|
| Engine mounts | Front engine mounting bracket to Transaxle | 64 | 47 |
|
|
|
| Engine mounts | Rear engine mounting bracket to Transaxle | 45 | 33 |
|
|
|
| Engine mounts | Engine mounting bracket LH to Transaxle | 64 | 47 |
|
|
|
| Sensor | Speed sensor (NC) to Transaxle | 11 | 8 |
|
|
|
| Sensor | Speed sensor (NT) to Transaxle | 11 | 8 |
|
|
|
| Sensor | ATF temperature sensor to Valve body | 7 | 5 |
|
|
|
| Starter | Starter to Transaxle | 37 | 27 |
|
|
|
| Starter | Starter wire to Starter | 10 | 7 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet elbow to Transaxle | 27 | 20 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet elbow to Transaxle | 27 | 20 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential gear lube apply tube to Transaxle housing | 10 | 7 |
|
|
|
| Flywheel/Flex plate | Flywheel housing under cover to Automatic transaxle | 8 | 6 |
|
|
|
| Transmission fluid pan | Oil pan to Transaxle | 8 | 6 |
|
|
|
| Transmission fluid pan | Automatic transaxle oil pan sub-assembly to Transaxle case | 8 | 6 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block upper side bolt | 64 | 47 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block lower side bolt A | 37 | 27 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine block lower side bolt B | 46 | 34 |
|
|
|
| Transmission mount/case | Transmission wire to Transaxle | 5 | 4 |
|
|
|
| Transmission mount/case | Valve body to Transaxle | 11 | 8 |
|
|
|
| Transmission mount/case | Brake apply tube clamp to Transaxle case | 5 | 4 |
|
|
|
| Transmission mount/case | Transaxle case No.1 plug to Transaxle rear cover | 7 | 5 |
|
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 19 | 14 | Bolt A |
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 25 | 18 | Other bolt |
|
|
| Transmission mount/case | Parking lock pawl shaft to Transaxle case | 10 | 7 |
|
|
|
| Transmission mount/case | Parking lock pawl bracket to Transaxle case | 20 | 15 |
|
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 22 | 16 | Bolt A |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 29 | 21 | Bolt B |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 29 | 21 | Bolt C |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 22 | 16 | Bolt D |
|
|
| Transmission mount/case | Automatic transmission case plug to Transaxle housing | 7 | 5 |
|
|
|
| Transmission mount/case | Automatic transmission case plug to Transaxle case | 7 | 5 |
|
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 20 | 15 | Bolt A |
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 12 | 9 | Bolt B |
|
|
| Torque converter | Torque converter clutch to Drive plate | 41 | 30 |
|
|
|
| Transfer | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Transfer | Park/Neutral position switch bolt | 5 | 4 |
|
|
|
| Transfer | Park/Neutral start switch to Control shaft lever | 13 | 10 |
|
|
|
| Transfer | Control shaft lever to Control shaft | 13 | 10 |
|
|
|
| Transfer | Shift control cable to Control shaft lever | 15 | 11 |
|
|
|
| Transfer | Control cable clamp to Engine mounting insulator | 12 | 9 |
|
|
|
| Transfer | Control cable bracket No.1 to Transaxle | 12 | 9 |
|
|
|
| Transfer | Control cable bracket No.2 to Transaxle | 12 | 9 |
|
|
|
| Transfer | Floor shift assembly to Body | 12 | 9 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Elise240SX - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 1 👎 6
