Toyota Yaris XP90 (2005-2012) Torque Spec Settings

Researched by Wan Wei Tay Engineer with a degree in mechanical engineering
Updated: December 02, 2023

Below you'll find the tightening torques for the Toyota Yaris XP90 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.

Most-used torque specs for Toyota Yaris XP90

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Wheels	Front wheel	103	76
Wheels	Rear wheel	103	76

To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.

Are these torque settings right for you?

Production years: 2005 - 2012
Generation: 2
Type of van: car
Model variant: Base
Also known as: Daihatsu Charade Leahead i1 Toyota Vitz Toyota Belta Toyota Vios Toyota Limo

All Torque Settings in Tables

engine torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Engine mounts	Engine mounting insulator RH to Body	52	38		1NZ-FE

drivetrain torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Drive/Axle shaft	Drive shaft nut	216	159	Use a 12-point socker No.30. Use a torque wrench.

steering torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

exhaust torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to

brakes torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Disc brake	Brake caliper fasteners	34	25	Use HEX No.H7. Use a torque wrench.
ABS	ABS sensor fastener to steering knuckle	8	6	Use a drive socket #10. Use a torque wrench.

suspension torque settings

Save to email ✉️

Part	Description	Torque (Nm)	Torque (ft/lbs)	Remarks	Applies to
Struts	Shock strut lower fastener to steering knuckle	164	121	Use a combination spanner #19. Use a drive socket #19. Use a torque wrench.
Ball joint	Ball joint fastener to steering knuckle.	65	48	Use a combinatio spanner #19. Use a torque wrench.