Toyota Yaris XP90 (2005-2012) Torque Spec Settings
By M 93 - Own work, CC BY-SA 3.0 de
Below you'll find the tightening torques for the Toyota Yaris XP90 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Yaris XP90
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Wheels | Front wheel | 103 | 76 |
|
|
|
| Wheels | Rear wheel | 103 | 76 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2005 - 2012
- Generation: 2
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Engine mounts | Transverse engine mounting bracket to Transmission case cover | 64 | 47 |
|
|
|
| Engine mounts | Transverse engine mounting insulator to Body | 52 | 38 |
|
|
|
| Engine mounts | Transverse engine mounting control bracket to Transaxle case | 39 | 29 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Front differential ring gear to Front differential case | 77 | 57 |
|
|
|
| Transmission fluid pan | Filler plug to Manual transmission case | 39 | 29 |
|
|
|
| Transmission mount/case | Manual transaxle assembly to Engine | 33 | 24 |
|
|
|
| Transmission mount/case | Bearing lock plate to Transaxle case | 11 | 8 |
|
|
|
| Transmission mount/case | Transmission case cover to Transmission case | 18 | 13 |
|
|
|
| Transmission mount/case | Transaxle case receiver to Transaxle case | 11 | 8 |
|
|
|
| Transmission mount/case | Transmission output shaft rear set nut to Output saft | 118 | 87 |
|
|
|
| Transfer | Control shaft cover to Transmission case | 20 | 15 |
|
|
|
| Transfer | Transmission control cable to Body | 5 | 4 |
|
|
|
| Transfer | Control cable bracket to Transaxle case | 25 | 18 |
|
|
|
| Transfer | Floor shift lever assembly to Body | 12 | 9 |
|
|
|
| Transfer | Gear shift fork No.1 to Gear shift fork shaft No.1 | 16 | 12 |
|
|
|
| Transfer | Gear shift fork No.2 to Gear shift fork shaft No.2 | 16 | 12 |
|
|
|
| Transfer | Gear shift fork No.3 to Gear shift fork shaft No.3 | 16 | 12 |
|
|
|
| Transfer | Gear shift head No.1 to Gear shift fork shaft No.2 | 16 | 12 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By M 93 - Own work, CC BY-SA 3.0 de
Did you find the answer to your specific question?
👍 5 👎 5
