Toyota 4Runner 4 (2003-2009) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota 4Runner 4 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota 4Runner 4
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Drain plug | 28 | 21 |
|
|
|
| Wheels | Front wheel | 112 | 83 |
|
|
|
| Wheels | Rear wheel | 112 | 83 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2009
- Generation: 4
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential front mounting support No.1 to Frame | 137 | 101 |
|
|
|
| Differential | Differential front mounting support No.2 to Frame | 137 | 101 |
|
|
|
| Differential | Differential front mounting support No.2 to Front differential tube assembly | 160 | 118 |
|
|
|
| Differential | Differential front mounting support No.1 to Differential carrier assembly front | 186 | 137 |
|
|
|
| Differential | Differential front mounting support No.2 to Differential carrier assembly front | 145 | 107 |
|
|
|
| Differential | Differential front mounting support No.3 to Differential carrier assembly front | 108 | 80 |
|
|
|
| Differential | Front differential mount nut No.1 | 87 | 64 |
|
|
|
| Differential | Ring gear to Front differential case | 97 | 72 |
|
|
|
| Differential | Differential carrier assembly front to Breather tube | 13 | 10 |
|
|
|
| Differential | Differential carrier assembly front to Side bearing retainer | 50 | 37 |
|
|
|
| Differential | Differential carrier assembly front to Differential case | 110 | 81 |
|
|
|
| Differential | Differential vacuum actuator assembly to Front differential tube assembly | 21 | 15 |
|
|
|
| Differential | Front drain plug | 65 | 48 |
|
|
|
| Differential | Front filler plug | 39 | 29 |
|
|
|
| Drive/Axle shaft | Front propeller shaft to Companion flange | 88 | 65 |
|
|
|
| Drive/Axle shaft | Rear propeller shaft assembly nuts | 88 | 65 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Mytho88, CC BY-SA 3.0, via Wikimedia Commons
Did you find the answer to your specific question?
👍 2 👎 4
