Toyota 4Runner 4 (2003-2009) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota 4Runner 4 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota 4Runner 4
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Drain plug | 28 | 21 |
|
|
|
| Wheels | Front wheel | 112 | 83 |
|
|
|
| Wheels | Rear wheel | 112 | 83 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2009
- Generation: 4
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Oil pan stud bolt | 4 | 3 |
|
|
|
| Oil pan | Oil pan sub-assembly bolt | 21 | 15 | Bolt A, 25mm |
|
|
| Oil pan | Oil pan sub-assembly bolt | 21 | 15 | Bolt B, 45mm |
|
|
| Oil pan | Oil pan sub-assembly bolt | 10 | 7 | Bolt C, 14mm |
|
|
| Oil pan | Oil pan sub-assembly nut | 21 | 15 |
|
|
|
| Oil pan | Oil pan sub-assembly housing bolts | 37 | 27 |
|
|
|
| Oil pan | Oil pan sub-assembly No.2 to Oil pan sub-assembly bolt | 9 | 7 |
|
|
|
| Oil pan | Oil pan sub-assembly housing bolts | 10 | 7 |
|
|
|
| Oil pan | Oil pan drain plug to Oil pan sub-assembly No.2 | 40 | 30 |
|
|
|
| Oil pan | Oil baffle plate | 9 | 7 |
|
|
|
| Oil pan | Drain plug to Oil pan | 28 | 21 |
|
|
|
| Oil pan | Drain plug to Oil pan | 28 | 21 |
|
|
|
| Oil filter | Oil filter bracket sub-assembly | 19 | 14 |
|
|
|
| Oil filter | Oil strainer sub-assembly to Oil pan sub-assembly | 9 | 7 |
|
|
|
| Oil filter | Oil strainer to Valve body | 10 | 7 |
|
|
|
| Oil filter | Oil strainer to Valve body | 10 | 7 |
|
|
|
| Oil pressure switch | Oil pressure switch to Oil filter bracket subassembly | 15 | 11 |
|
|
|
| Oil dipstick | Oil filter bracket sub-assembly | 9 | 7 |
|
|
|
| Oil feeder | Oil filler tube | 12 | 9 |
|
|
|
| Oil feeder | Oil filler cap housing | 9 | 7 |
|
|
|
| Oil pump | Oil pump cover bolts | 9 | 7 |
|
|
|
| Oil pump | Oil pump relief valve plug | 49 | 36 |
|
|
|
| Vacuum pump | Vane pump assembly | 43 | 32 |
|
|
|
| Piston rods | Connecting rod cap bolts | 25 | 18 | First step |
|
|
| Cylinder head | Cylinder head sub-assembly and Cylinder head LH stud bolt | 4 | 3 | Bolt A |
|
|
| Cylinder head | Cylinder head sub-assembly and Cylinder head LH stud bolt | 9 | 7 | Bolt B |
|
|
| Cylinder head | Cylinder head sub-assembly and Cylinder head LH union | 15 | 11 |
|
|
|
| Cylinder head | Cylinder head sub-assembly and Cylinder head LH screw plug | 80 | 59 | With head taper screw plug |
|
|
| Cylinder head | Cylinder head sub-assembly RH | 36 | 27 | First step |
|
|
| Cylinder head | Cylinder head sub-assembly LH | 30 | 22 | Recessed head, First step |
|
|
| Cylinder head | Cylinder head sub-assembly LH | 30 | 22 | 14mm head |
|
|
| Cylinder head | Cylinder head cover sub-assembly to Cylinder head sub assembly bolt | 10 | 7 | Bolt A |
|
|
| Cylinder head | Cylinder head cover sub-assembly to Cylinder head sub assembly bolt | 9 | 7 | Bolt B |
|
|
| Cylinder head | Cylinder head cover sub-assembly to Cylinder head sub assembly nut | 9 | 7 |
|
|
|
| Cylinder head | Ground cable to Cylinder head sub-assembly | 8 | 6 |
|
|
|
| Cylinder head | Oil control valve filter plug to Cylinder head sub-assembly | 62 | 46 |
|
|
|
| Cylinder head | Water by-pass joint RR to Cylinder head sub-assembly | 9 | 7 |
|
|
|
| Cylinder head | Ventilation valve to Cylinder head sub-assembly LH | 27 | 20 |
|
|
|
| Spark plugs | Spark plug | 20 | 15 |
|
|
|
| Intake manifold | Intake manifold to Cylinder head sub-assembly | 26 | 19 |
|
|
|
| Intake manifold | Intake air surge tank bolts and nuts | 28 | 21 |
|
|
|
| Intake manifold | Intake air surge tank stays upper bolts | 21 | 15 |
|
|
|
| Intake manifold | Intake air surge tank v-bank cover sub-assembly | 8 | 6 |
|
|
|
| Throttle body | Throttle with motor body assembly to Intake air surge tank | 11 | 8 |
|
|
|
| Throttle body | Throttle body bracket upper bolts | 21 | 15 |
|
|
|
| Engine block | Cylinder block sub-assembly stud bolt | 11 | 8 | Bolt A |
|
|
| Engine block | Cylinder block sub-assembly stud bolt | 5 | 4 | Bolt B |
|
|
| Engine block | Cylinder block sub-assembly stud bolt | 4 | 3 | Bolt C |
|
|
| Engine block | Cylinder block water drain cock plug to Cylinder block water drain cock | 13 | 10 |
|
|
|
| Engine block | Engine rear oil seal retainer bolt | 10 | 7 |
|
|
|
| Engine block | Engine rear oil seal retainer nut | 9 | 7 |
|
|
|
| Engine block | Engine wire No.2 to Cylinder block sub-assembly | 13 | 10 |
|
|
|
| Engine block | Sub-assembly oil nozzle No.1 to Cylinder block sub-assembly | 9 | 7 |
|
|
|
| Engine mounts | Engine hanger No.1 to Cylinder head sub-assembly | 33 | 24 |
|
|
|
| Engine mounts | Engine mounting bracket front No.1 to Cylinder block sub-assembly | 43 | 32 |
|
|
|
| Engine mounts | Engine mounting insulator front No.1 to Frame assembly | 38 | 28 |
|
|
|
| Engine mounts | Engine rear mounting member to Body bolt | 18 | 13 |
|
|
|
| Engine mounts | Engine rear mounting member to Body bolt | 18 | 13 |
|
|
|
| Engine mounts | Engine rear mounting member to Body nut | 72 | 53 |
|
|
|
| Engine mounts | Engine rear mounting member to Body nut | 72 | 53 |
|
|
|
| Engine mounts | No.1 engine under cover bolts | 29 | 21 |
|
|
|
| Sensor | Crankshaft position sensor | 10 | 7 |
|
|
|
| Sensor | Heated oxygen sensor | 44 | 32 | For Bank 2 |
|
|
| Sensor | Heated oxygen sensor | 44 | 32 | For Bank 1 |
|
|
| Sensor | Knock sensor bolts | 20 | 15 |
|
|
|
| Sensor | Speed sensor to Automatic transmission | 5 | 4 |
|
|
|
| Sensor | Speed sensor to Automatic transmission | 5 | 4 |
|
|
|
| Sensor | VVT sensor | 8 | 6 |
|
|
|
| Alternator | Generator assembly bolts | 43 | 32 |
|
|
|
| Alternator | Generator pulley to Generator rotor assembly | 110 | 81 |
|
|
|
| Alternator | Wire harness clamp bracket bolts | 8 | 6 |
|
|
|
| Alternator | Wire harness to Terminal B nut | 10 | 7 |
|
|
|
| Alternator | Wire harness stay bolt | 8 | 6 |
|
|
|
| Alternator | Generator coil assembly bolts | 6 | 4 |
|
|
|
| Alternator | Generator rear end cover nuts | 5 | 4 |
|
|
|
| Starter | Starter assembly to Transmission housing | 37 | 27 |
|
|
|
| Starter | Starter assembly to Terminal 30 | 10 | 7 |
|
|
|
| Starter | Starter yoke assembly through bolts | 6 | 4 |
|
|
|
| Battery | Battery negative terminal | 4 | 3 |
|
|
|
| Battery | Ignition coil assembly | 10 | 7 |
|
|
|
| Camshaft | Camshaft bearing cap bolts | 9 | 7 | 10mm head |
|
|
| Camshaft | Camshaft bearing cap bolts | 24 | 18 | 12mm head |
|
|
| Camshaft | Camshaft timing gear assembly | 100 | 74 |
|
|
|
| Camshaft | Camshaft timing gear/sprocket | 100 | 74 |
|
|
|
| Camshaft | Camshaft timing oil control valve assembly bolts | 10 | 7 |
|
|
|
| Crankshaft | Crankshaft pulley set bolt | 250 | 184 |
|
|
|
| Crankshaft | Main bearing cap bolts | 61 | 45 | 12 pointed head, First step |
|
|
| Crankshaft | Main bearing cap bolts | 26 | 19 | 12mm head |
|
|
| Water pump | Water pump bolts | 9 | 7 | 10mm head |
|
|
| Water pump | Water pump bolts | 23 | 17 | 12mm head |
|
|
| Fuel/Oil cooler | Oil cooler assembly to Body | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler assembly to Body | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler union bolt | 68 | 50 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Radiator | Fan shroud bolts | 5 | 4 |
|
|
|
| Radiator | Fan with fluid coupling bolts | 21 | 15 |
|
|
|
| Radiator | Radiator assembly bolts | 18 | 13 |
|
|
|
| Radiator | Water inlet bolts | 9 | 7 |
|
|
|
| Radiator | Water outlet pipe No.1 bolts | 10 | 7 |
|
|
|
| Radiator | Water inlet with thermostat nuts | 9 | 7 |
|
|
|
| Air conditioning | Air cleaner assembly to Cylinder head cover subassembly | 8 | 6 |
|
|
|
| Air conditioning | Air cleaner assembly to Intake air surge tank | 8 | 6 |
|
|
|
| Air conditioning | Magnet clutch hub to Cooler compressor assembly | 18 | 13 |
|
|
|
| Air conditioning | Compressor and magnetic clutch to Engine | 24 | 18 |
|
|
|
| Air conditioning | Discharge hose subassembly to Compressor and magnetic clutch | 10 | 7 |
|
|
|
| Air conditioning | Suction hose subassembly to Compressor and magnetic clutch | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | Chain tensioner No.1 bolts | 10 | 7 |
|
|
|
| Belt tensioner/Timing chains | Chain tensioner No.2 | 19 | 14 |
|
|
|
| Belt tensioner/Timing chains | Chain tensioner No.3 | 19 | 14 |
|
|
|
| Belt tensioner/Timing chains | Chain vibration damper No.1 | 19 | 14 |
|
|
|
| Belt tensioner/Timing chains | Idler pulley sub-assembly No.1 bolt | 54 | 40 |
|
|
|
| Belt tensioner/Timing chains | Idler pulley sub-assembly No.2 bolt | 39 | 29 |
|
|
|
| Belt tensioner/Timing chains | No.2 idle gear shaft | 60 | 44 |
|
|
|
| Belt tensioner/Timing chains | Timing chain cover bolts and nuts | 23 | 17 |
|
|
|
| Belt tensioner/Timing chains | Oil pan stud bolt | 9 | 7 |
|
|
|
| Belt tensioner/Timing chains | V-ribbed belt tensioner assembly | 36 | 27 |
|
|
|
| PCM | ECM to Body | 13 | 10 |
|
|
|
| Fuel system | Fuel delivery pipe to Intake manifold bolts | 15 | 11 |
|
|
|
| Fuel system | Pressure regulator fuel inlet to SST union bolts | 4 | 3 |
|
|
|
| Fuel system | Fuel pressure regulator bolts | 9 | 7 |
|
|
|
| Fuel system | Fuel tank to Body | 40 | 30 |
|
|
|
| Fuel system | Fuel tank protector subassembly No.1 to Body | 20 | 15 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Differential vacuum actuator assembly to Front differential tube assembly | 21 | 15 |
|
|
|
| Flywheel/Flex plate | Drive plate and Ring gear sub-assembly to Crankshaft | 83 | 61 |
|
|
|
| Transmission fluid pan | Oil pan to Transmission case | 4 | 3 |
|
|
|
| Transmission fluid pan | Oil pan to Transmission case | 4 | 3 |
|
|
|
| Transmission fluid pan | Oil pan sub-assembly to Transmission | 37 | 27 |
|
|
|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Overflow plug to Automatic transmission | 20 | 15 |
|
|
|
| Transmission fluid pan | Overflow plug to Automatic transmission | 20 | 15 |
|
|
|
| Transmission fluid pan | Refill plug to Automatic transmission | 39 | 29 |
|
|
|
| Transmission fluid pan | Refill plug to Automatic transmission | 39 | 29 |
|
|
|
| Transmission fluid pan | Transmission oil filler tube sub-assembly | 12 | 9 |
|
|
|
| Transmission mount/case | Automatic transmission to Engine | 37 | 27 | 14mm head |
|
|
| Transmission mount/case | Automatic transmission to Engine | 71 | 52 | 17mm head |
|
|
| Transmission mount/case | Automatic transmission to Engine | 37 | 27 | 14mm head |
|
|
| Transmission mount/case | Automatic transmission to Engine | 71 | 52 | 17mm head |
|
|
| Transmission mount/case | Valve body to Transmission case | 11 | 8 |
|
|
|
| Transmission mount/case | Valve body to Transmission case | 11 | 8 |
|
|
|
| Transmission mount/case | Engine mounting insulator rear No.1 to Automatic transmission | 65 | 48 |
|
|
|
| Transmission mount/case | Engine mounting insulator rear No.1 to Automatic transmission | 65 | 48 |
|
|
|
| Transmission mount/case | Transmission control cable to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission control cable to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission control cable assembly to Body | 6 | 4 |
|
|
|
| Transmission mount/case | Transmission control cable assembly to Body | 6 | 4 |
|
|
|
| Transmission mount/case | Transmission control cable bracket No.1 to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission control cable bracket No.1 to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission wire set bolt to Automatic transmission | 5 | 4 |
|
|
|
| Transmission mount/case | Transmission wire set bolt to Automatic transmission | 5 | 4 |
|
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 10 | 7 | A |
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 11 | 8 | B |
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 10 | 7 | A |
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 11 | 8 | B |
|
|
| Transmission mount/case | Wire harness to Automatic transmission | 8 | 6 |
|
|
|
| Transmission mount/case | Wire harness to Automatic transmission | 8 | 6 |
|
|
|
| Transmission mount/case | Park/Neutral position switch bolt | 13 | 10 |
|
|
|
| Transmission mount/case | Park/Neutral position switch bolt | 13 | 10 |
|
|
|
| Transmission mount/case | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Transmission mount/case | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Torque converter | Torque converter clutch to Drive plate | 48 | 35 |
|
|
|
| Torque converter | Torque converter clutch to Drive plate | 48 | 35 |
|
|
|
| Transfer | Floor shift assembly to Body | 14 | 10 |
|
|
|
| Transfer | Floor shift assembly to Body | 14 | 10 |
|
|
|
| Drive/Axle shaft | Propeller shaft heat insulator to Frame crossmember | 33 | 24 |
|
|
|
| Drive/Axle shaft | Propeller shaft heat insulator to Frame crossmember | 33 | 24 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold to Cylinder head sub-assembly | 26 | 19 |
|
|
|
| Exhaust manifold | Exhaust manifold nuts | 30 | 22 |
|
|
|
| Exhaust manifold | Exhaust manifold stay | 40 | 30 |
|
|
|
| Exhaust manifold | Exhaust manifold stay No.2 | 40 | 30 |
|
|
|
| Exhaust manifold | Exhaust pipe to Exhaust manifold | 62 | 46 |
|
|
|
| Exhaust manifold | Exhaust pipe to Exhaust manifold | 62 | 46 |
|
|
|
| Exhaust manifold | Exhaust front pipe assembly nuts | 62 | 46 |
|
|
|
| Exhaust manifold | Exhaust pipe assembly center bolts | 43 | 32 |
|
|
|
| Exhaust manifold | Exhaust tail pipe assembly bolts | 48 | 35 |
|
|
|
| Exhaust manifold | Exhaust pipe | 48 | 35 |
|
|
|
| Exhaust manifold | Exhaust pipe | 48 | 35 |
|
|
|
| Exhaust manifold | No.2 exhaust front pipe assembly nut | 62 | 46 |
|
|
|
| Exhaust manifold | No.2 exhaust front pipe assembly bolt | 48 | 35 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Brake pedal | Accelerator pedal rod assembly to Body | 5 | 4 |
|
|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Mytho88, CC BY-SA 3.0, via Wikimedia Commons
Did you find the answer to your specific question?
👍 2 👎 2
