Toyota 4Runner 4 (2003-2009) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota 4Runner 4 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota 4Runner 4
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Drain plug | 28 | 21 |
|
|
|
| Wheels | Front wheel | 112 | 83 |
|
|
|
| Wheels | Rear wheel | 112 | 83 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2009
- Generation: 4
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transfer | Transfer to Transfer adaptor | 24 | 18 |
|
|
|
| Transfer | Transfer case cover sub-assembly to Front case | 18 | 13 |
|
|
|
| Transfer | Transfer case plug to Front case | 19 | 14 |
|
|
|
| Transfer | Transfer case lower protector | 18 | 13 |
|
|
|
| Transfer | Transfer shift actuator assembly to Case rear | 20 | 15 |
|
|
|
| Transfer | Front case to Case rear | 28 | 21 |
|
|
|
| Transfer | Filler plug to Case rear | 37 | 27 |
|
|
|
| Transfer | Drain plug to Case rear | 37 | 27 |
|
|
|
| Transfer | CTR differential lock fork sub-assembly to Transfer shift actuator assembly | 24 | 18 |
|
|
|
| Transfer | Extension housing sub-assembly rear to Case rear | 12 | 9 |
|
|
|
| Transfer | Front bearing retainer sub-assembly to Front case | 12 | 9 |
|
|
|
| Transfer | Gear shift fork No.2 to Transfer shift actuator assembly | 24 | 18 |
|
|
|
| Transfer | Shift shaft stopper to Case rear | 19 | 14 |
|
|
|
| Transfer | Oil separator sub-assembly to Case rear | 8 | 6 |
|
|
|
| Transfer | Output shaft companion flange sub-assembly lock nut | 118 | 87 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Mytho88, CC BY-SA 3.0, via Wikimedia Commons
Did you find the answer to your specific question?
👍 2 👎 2
