Toyota 4Runner 4 (2003-2009) Torque Spec Settings
By IFCAR - Own work, Public Domain
Below you'll find the tightening torques for the Toyota 4Runner 4 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota 4Runner 4
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Drain plug | 28 | 21 |
|
|
|
| Wheels | Front wheel | 112 | 83 |
|
|
|
| Wheels | Rear wheel | 112 | 83 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2003 - 2009
- Generation: 4
- Type of van: car
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug to Oil pan | 20 | 15 |
|
|
|
| Oil pan | Drain plug to Oil pan | 28 | 21 |
|
|
|
| Oil pan | Oil strainer to Valve body | 10 | 7 |
|
|
|
| Oil filter | Oil strainer to Valve body | 10 | 7 |
|
|
|
| Oil feeder | Oil filler tube | 12 | 9 |
|
|
|
| Engine mounts | Engine rear mounting member to Body bolt | 18 | 13 |
|
|
|
| Engine mounts | Engine rear mounting member to Body nut | 72 | 53 |
|
|
|
| Sensor | Speed sensor bolts | 5 | 4 |
|
|
|
| Sensor | Speed sensor to Automatic transmission | 5 | 4 |
|
|
|
| Sensor | Speed sensor to Automatic transmission | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler assembly to Body | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube union | 29 | 21 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet tube No.1 to Automatic transmission | 34 | 25 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Flywheel/Flex plate | Flywheel housing under cover to Automatic transmission | 18 | 13 |
|
|
|
| Transmission fluid pan | Flywheel housing under cover to Automatic transmission | 18 | 13 |
|
|
|
| Transmission fluid pan | Oil pan to Transmission case | 4 | 3 |
|
|
|
| Transmission fluid pan | Oil pan to Transmission case | 4 | 3 |
|
|
|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Drain plug | 28 | 21 |
|
|
|
| Transmission fluid pan | Overflow plug to Automatic transmission | 20 | 15 |
|
|
|
| Transmission fluid pan | Overflow plug to Automatic transmission | 20 | 15 |
|
|
|
| Transmission fluid pan | Refill plug to Automatic transmission | 39 | 29 |
|
|
|
| Transmission fluid pan | Refill plug to Automatic transmission | 39 | 29 |
|
|
|
| Transmission mount/case | Automatic transmission to Engine | 37 | 27 | 14mm head |
|
|
| Transmission mount/case | Automatic transmission to Engine | 71 | 52 | 17mm head |
|
|
| Transmission mount/case | Automatic transmission to Engine | 37 | 27 | 14mm head |
|
|
| Transmission mount/case | Automatic transmission to Engine | 71 | 52 | 17mm head |
|
|
| Transmission mount/case | Valve body to Transmission case | 11 | 8 |
|
|
|
| Transmission mount/case | Valve body to Transmission case | 11 | 8 |
|
|
|
| Transmission mount/case | Transmission housing bolts | 34 | 25 | Bolt A |
|
|
| Transmission mount/case | Transmission housing bolts | 57 | 42 | Bolt B |
|
|
| Transmission mount/case | Transmission housing bolts | 34 | 25 | Bolt C |
|
|
| Transmission mount/case | Engine mounting insulator rear No.1 to Automatic transmission | 65 | 48 |
|
|
|
| Transmission mount/case | Engine mounting insulator rear No.1 to Automatic transmission | 65 | 48 |
|
|
|
| Transmission mount/case | Transmission control cable to Automatic transmission | 12 | 9 |
|
|
|
| Transmission mount/case | Transmission control cable to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission control cable assembly to Body | 6 | 4 |
|
|
|
| Transmission mount/case | Transmission control cable bracket No.1 to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission wire set bolt to Automatic transmission | 5 | 4 |
|
|
|
| Transmission mount/case | Transmission wire set bolt to Automatic transmission | 5 | 4 |
|
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 10 | 7 | A |
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 11 | 8 | B |
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 10 | 7 | A |
|
|
| Transmission mount/case | Transmission wire clamp to Valve body | 11 | 8 | B |
|
|
| Transmission mount/case | Wire harness to Automatic transmission | 8 | 6 |
|
|
|
| Transmission mount/case | Park/Neutral position switch bolt | 13 | 10 |
|
|
|
| Transmission mount/case | Park/Neutral position switch bolt | 13 | 10 |
|
|
|
| Transmission mount/case | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Transmission mount/case | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Transmission adapter | Transmission flange to Output shaft | 126 | 93 |
|
|
|
| Torque converter | Torque converter clutch to Drive plate | 48 | 35 |
|
|
|
| Torque converter | Torque converter clutch to Drive plate | 48 | 35 |
|
|
|
| Transfer | Floor shift assembly to Body | 12 | 9 |
|
|
|
| Transfer | Floor shift assembly to Body | 14 | 10 |
|
|
|
| Transfer | Shift lever nut | 16 | 12 |
|
|
|
| Drive/Axle shaft | Propeller shaft heat insulator to Frame crossmember | 33 | 24 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust pipe to Exhaust manifold | 62 | 46 |
|
|
|
| Exhaust manifold | Exhaust pipe to Exhaust manifold | 62 | 46 |
|
|
|
| Exhaust manifold | Exhaust pipe | 48 | 35 |
|
|
|
| Exhaust manifold | Exhaust pipe | 48 | 35 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Control arm | Front suspension member bracket to Body | 33 | 24 | 2UZ-FE |
|
|
| Control arm | Front suspension member bracket to Body | 33 | 24 | 1GR-FE |
|
|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
Mytho88, CC BY-SA 3.0, via Wikimedia Commons
Did you find the answer to your specific question?
👍 2 👎 2
