Toyota Corolla E100 (1991-1999) Torque Spec Settings

OSX, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Corolla E100 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E100
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front brake caliper mounting bracket bolts | 88 | 65 |
|
![]() |
|
Wheels | Wheel nuts | 103 | 76 |
|
![]() |
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1991 - 1999
- Generation: 7
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Torque converter | Converter bolts | 46 | 34 |
|
![]() |
|
Drive/Axle shaft | Front propeller shaft bolt | 37 | 27 |
|
![]() |
|
Drive/Axle shaft | Rear propeller shaft bolt | 37 | 27 |
|
![]() |
|
Drive/Axle shaft | Front center support bearing bolt | 37 | 27 |
|
![]() |
|
Drive/Axle shaft | Rear center support bearing bolt | 37 | 27 |
|
![]() |
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Tie rods to Knuckles nuts | 48 | 35 | Manual steering |
|
![]() |
Tie rod end | Tie rods to Knuckles nuts | 48 | 35 | Power steering |
|
![]() |
Steering rack | Steering rack bracket bolts | 58 | 43 | Manual steering |
|
![]() |
Steering rack | Steering rack bracket bolts | 58 | 43 | Power steering |
|
![]() |
Steering rack | Steering gear housing upper and lower set bolts | 35 | 26 | Manual steering |
|
![]() |
Steering column | Column hole cover | 5 | 4 | Manual steering |
|
![]() |
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
ABS | ABS sensor retaining bolts | 8 | 6 |
|
![]() |
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Shock absorbers/shocks | Rear shock absorber upper mounting nuts | 25 | 18 |
|
![]() |
|
Shock absorbers/shocks | Rear shock absorber lower nuts | 50 | 37 |
|
![]() |
|
Stabilizer bar | Rear stabilizer bar bracket bolt | 37 | 27 |
|
![]() |
|
Control arm | Rear upper control arm bolts | 98 | 72 |
|
![]() |
|
Control arm | Rear lower control arm bolts | 98 | 72 |
|
![]() |
|
Control arm | Lower control arm to Steering knuckle nuts and bolts | 142 | 105 |
|
![]() |
|
Control arm | Rear lateral control rod to Body nut | 97 | 72 |
|
![]() |
|
Control arm | Rear control to Axle housing nut | 64 | 47 |
|
![]() |
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|

OSX, Public domain, via Wikimedia Commons
Did you find the answer to your specific question?
👍 3 👎 1