Toyota Corolla E100 (1991-1999) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Corolla E100 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E100
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front brake caliper mounting bracket bolts | 88 | 65 |
|
||
Wheels | Wheel nuts | 103 | 76 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1991 - 1999
- Generation: 7
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | No.1 oil pan bolts | 16 | 12 | Bolts A |
|
|
Oil pan | No.1 oil pan bolts | 8 | 6 | Bolts B |
|
|
Oil pan | No.2 oil pan bolts and nuts | 5 | 4 |
|
||
Oil pan | Oil pan baffle mounting bolts and nuts | 8 | 6 |
|
||
Oil dipstick | Oil guide tube retaining bolt | 9 | 7 |
|
||
Oil pump | Oil pump bolts | 21 | 15 |
|
||
Cylinder head | Cylinder head bolts | 60 | 44 |
|
||
Cylinder head | Cylinder head bolts | 29 | 21 |
|
||
Intake manifold | Intake manifold bolt | 19 | 14 |
|
||
Intake manifold | Intake chamber bolt and nut | 19 | 14 |
|
||
Throttle body | Throttle body bolts | 21 | 15 |
|
||
Engine mounts | Front engine mounting bracket | 77 | 57 |
|
||
Engine mounts | LH mounting bracket | 52 | 38 |
|
||
Engine mounts | Front transaxle mount bolts | 64 | 47 |
|
||
Engine mounts | Front transaxle mount through bolt nut | 87 | 64 |
|
||
Alternator | Alternator bolt | 26 | 19 |
|
||
Starter | Starter mounting bolts | 39 | 29 |
|
||
Camshaft | Camshaft timing belt pulley bolt | 59 | 44 |
|
||
Crankshaft | Crankshaft pulley bolt | 118 | 87 |
|
||
Water pump | Water pump retaining bolts | 15 | 11 |
|
||
Water pump | Water pump pulley bolt | 9 | 7 |
|
||
Radiator | Engine coolant inlet pipe nuts | 15 | 11 |
|
||
Radiator | Water inlet retainers | 20 | 15 |
|
||
Radiator | Water inlet no.2 retainers | 15 | 11 |
|
||
Radiator | Water outlet bolt | 15 | 11 |
|
||
Air conditioning | A/C compressor mounting bracket bolt | 47 | 35 |
|
||
Belt tensioner/Timing chains | Idler pulley bolt | 37 | 27 |
|
||
Belt tensioner/Timing chains | Timing belt covers bolts | 7 | 5 |
|
||
Fuel system | Fuel inlet hose bolt | 29 | 21 |
|
||
Fuel system | Fuel union bolt | 30 | 22 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Power steering | Power steering pump pulley nut | 43 | 32 |
|
||
Power steering | Power steering pump bracket bolts | 39 | 29 |
|
||
Power steering | Pressure and return lines to Pump banjo fitting | 54 | 40 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold bolts | 25 | 18 |
|
||
Exhaust manifold | Exhaust manifold nuts | 34 | 25 |
|
||
Exhaust manifold | Exhaust manifold stay bolt | 39 | 29 |
|
||
Exhaust manifold | Front exhaust pipe bolt | 43 | 32 |
|
||
Exhaust manifold | Front exhaust pipe nut | 62 | 46 |
|
||
Exhaust manifold | Front exhaust pipe mounting bracket bolt | 19 | 14 |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 1