Toyota Corolla E100 (1991-1999) Torque Spec Settings
OSX, Public domain, via Wikimedia Commons
Below you'll find the tightening torques for the Toyota Corolla E100 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E100
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Water pump | Water pump pulley bolts | 22 | 16 | Minimum torque |
|
|
| Water pump | Water pump pulley bolts | 24 | 18 | Maximum torque |
|
|
| Disc brake | Front brake caliper mounting bracket bolts | 88 | 65 |
|
|
|
| Wheels | Wheel nuts | 103 | 76 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1991 - 1999
- Generation: 7
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil dipstick | Dipstick tube mounting bolt | 9 | 7 |
|
|
|
| Oil pump | Oil pump retaining bolts | 21 | 15 |
|
|
|
| Cylinder head | Cylinder head bolts | 29 | 21 | Stage 1 |
|
|
| Spark plugs | Spark plugs | 18 | 13 |
|
|
|
| Intake manifold | Intake manifold bolt | 27 | 20 |
|
|
|
| Intake manifold | Intake manifold stay bolts | 22 | 16 | Bolts 12mm |
|
|
| Intake manifold | Intake manifold stay bolts | 39 | 29 | Bolts 14mm |
|
|
| Throttle body | Throttle body bolts | 22 | 16 |
|
|
|
| Engine mounts | Engine mounting bolt front | 48 | 35 |
|
|
|
| Engine mounts | Engine front mounting bolt | 87 | 64 |
|
|
|
| Engine mounts | Engine mounting bolt center | 52 | 38 |
|
|
|
| Engine mounts | Engine mounting bolt rear | 57 | 42 |
|
|
|
| Engine mounts | Engine rear mounting bolt | 87 | 64 |
|
|
|
| Engine mounts | RH engine mounting bracket bolt | 39 | 29 |
|
|
|
| Engine mounts | No.2 RH engine mounting bracket bolt | 21 | 15 |
|
|
|
| Engine mounts | Right engine mount through bolt | 87 | 64 |
|
|
|
| Engine mounts | Right engine mount nut | 52 | 38 |
|
|
|
| Engine mounts | Right motor mount and through bolt | 78 | 58 |
|
|
|
| Engine mounts | Engine mounting automatics | 52 | 38 |
|
|
|
| Engine mounts | Engine mounting RH to Engine manual bolt | 64 | 47 |
|
|
|
| Engine mounts | Engine mounting RH to Engine manual nut | 52 | 38 |
|
|
|
| Engine mounts | Engine mounting bracket to Transaxle | 61 | 45 |
|
|
|
| Engine mounts | Front transaxle mount through bolt nut | 87 | 64 |
|
|
|
| Starter | Starter mounting bolts | 39 | 29 |
|
|
|
| Camshaft | Camshaft timing belt pulleys center bolts | 58 | 43 |
|
|
|
| Crankshaft | Crankshaft pulley bolt | 137 | 101 |
|
|
|
| Water pump | Water pump mounting bolts | 15 | 11 |
|
|
|
| Water pump | Water pump pulley bolts | 22 | 16 | Minimum torque |
|
|
| Water pump | Water pump pulley bolts | 24 | 18 | Maximum torque |
|
|
| Fuel/Oil cooler | Oil cooler pipe union bolt | 25 | 18 |
|
|
|
| Radiator | Water outlet - cylinder head side bolts | 27 | 20 |
|
|
|
| Radiator | Water outlet - block side | 13 | 10 |
|
|
|
| Belt tensioner/Timing chains | Idler pulley bolt | 37 | 27 |
|
|
|
| Belt tensioner/Timing chains | Timing belt cover retaining bolts | 9 | 7 |
|
|
|
| Valve cover | Valve covers | 13 | 10 |
|
|
|
| Fuel system | Cold start injector pipe to Delivery pipe (fuel rail) | 17 | 13 |
|
|
|
| Fuel system | Fuel union bolt | 30 | 22 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Power steering | Power steering pump pulley nut | 38 | 28 |
|
|
|
| Power steering | Power steering pump idler pulley bracket mounting bolts | 39 | 29 |
|
|
|
| Power steering | Pressure hose fitting | 44 | 32 |
|
|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust manifold bolts and nuts | 25 | 18 |
|
|
|
| Exhaust manifold | Exhaust manifold stay bolts | 39 | 29 |
|
|
|
| Exhaust manifold | Front pipe to Exhaust manifold mounting nuts | 62 | 46 |
|
|
|
| EGR | EGR valve with pipes bolt | 19 | 14 |
|
|
|
| EGR | EGR valve with pipes union bolt | 69 | 51 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
OSX, Public domain, via Wikimedia Commons
Did you find the answer to your specific question?
👍 3 👎 1