Toyota Corolla E100 (1991-1999) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Corolla E100 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E100
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front brake caliper mounting bracket bolts | 88 | 65 |
|
||
Wheels | Wheel nuts | 103 | 76 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 1991 - 1999
- Generation: 7
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Oil sump bolts | 13 | 10 | Non-VVT-i engines |
|
|
Oil pump | Oil pump bolts | 8 | 6 | Non-VVT-i engines |
|
|
Oil pump | Oil pick-up/strainer nuts/bolts | 11 | 8 | Non-VVT-i engines |
|
|
Piston rods | Connecting rod | 39 | 29 | Non-VVT-i engines |
|
|
Cylinder head | Cylinder head bolts | 30 | 22 | Stage 1, Non-VVT-i engines |
|
|
Cylinder head | Cylinder head bolts | 45 | 33 | Stage 2, Non-VVT-i engines |
|
|
Intake manifold | Intake manifold bolt | 19 | 14 | Non-VVT-i engines |
|
|
Throttle body | Throttle body mounting bolts/nuts | 19 | 14 |
|
||
Sensor | Crankshaft position sensor | 8 | 6 | Non-VVT-i engines |
|
|
Camshaft | Camshaft sprocket bolt | 51 | 38 | Non-VVT-i engines |
|
|
Crankshaft | Crankshaft pulley to Crankshaft bolt | 155 | 114 | Non-VVT-i engines |
|
|
Crankshaft | Crankshaft oil seal retainer bolts | 7 | 5 | Non-VVT-i engines |
|
|
Belt tensioner/Timing chains | Upper pulley to Cylinder head bolts | 19 | 14 | Non-VVT-i engines |
|
|
Belt tensioner/Timing chains | Lower pulley to Cylinder block bolts | 28 | 21 | Non-VVT-i engines |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Flywheel/Flex plate | Flywheel/Driveplate bolts | 90 | 66 | Non-VVT-i engines |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Exhaust manifold | Exhaust manifold nuts/bolts | 48 | 35 | Non-VVT-i engines |
|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 1