Toyota Corolla E140 (2007-2013) Torque Spec Settings
By SsmIntrigue - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Toyota Corolla E140 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E140
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2013
- Generation: 10
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Engine mounts | Engine mounting bracket LH to Manual transaxle | 52 | 38 |
|
|
|
| Engine mounts | Front engine mounting bracket to Manual transaxle | 64 | 47 |
|
|
|
| Engine mounts | Rear engine mounting bracket to Manual transaxle | 45 | 33 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Front differential ring gear to Front differential case | 106 | 78 |
|
|
|
| Clutch assembly | Clutch tube bracket to Manual transaxle case | 8 | 6 |
|
|
|
| Clutch assembly | Clutch accumulator bracket to Clutch accumulator | 12 | 9 |
|
|
|
| Clutch assembly | Clutch accumulator bracket to Starter assembly | 37 | 27 |
|
|
|
| Clutch assembly | Clutch accumulator assembly to Release cylinder assembly | 12 | 9 |
|
|
|
| Transmission fluid pan | Filler plug to Transmission case | 49 | 36 |
|
|
|
| Transmission fluid pan | Drain plug to Transmission case | 49 | 36 |
|
|
|
| Transmission fluid pan | Transmission oil baffle to Manual transmission case | 17 | 13 |
|
|
|
| Transmission mount/case | Manual transaxle to Engine | 44 | 32 |
|
|
|
| Transmission mount/case | Transmission case to Manual transaxle case | 29 | 21 |
|
|
|
| Transfer | Shift lever assembly to Body | 12 | 9 |
|
|
|
| Transfer | Reverse shift arm bracket to Manual transaxle case | 17 | 13 |
|
|
|
| Transfer | Reverse idler gear shaft bolt to Transmission case | 30 | 22 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Kevauto - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 3 👎 2
