Toyota Corolla E140 (2007-2013) Torque Spec Settings
By SsmIntrigue - Own work, CC BY-SA 4.0
Below you'll find the tightening torques for the Toyota Corolla E140 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E140
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2013
- Generation: 10
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pan | Drain plug to Oil pan | 49 | 36 |
|
|
|
| Oil pump | Oil pump assembly to Transaxle case | 22 | 16 |
|
|
|
| Oil pump | Oil pump body to Stator shaft assembly | 10 | 7 |
|
|
|
| Engine mounts | Engine mounting bracket LH to Automatic transaxle | 52 | 38 |
|
|
|
| Engine mounts | Front engine mounting bracket to Automatic transaxle | 64 | 47 |
|
|
|
| Engine mounts | Rear engine mounting bracket to Automatic transaxle | 45 | 33 |
|
|
|
| Sensor | Speed sensor NC to Automatic transaxle | 9 | 7 |
|
|
|
| Sensor | Speed sensor NT to Automatic transaxle | 11 | 8 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube to Automatic transaxle | 12 | 9 |
|
|
|
| Fuel/Oil cooler | Inlet oil cooler elbow to Transaxle case | 27 | 20 |
|
|
|
| Fuel/Oil cooler | Outlet oil cooler union to Transaxle case | 27 | 20 |
|
|
|
| Valve cover | Valve body to Automatic transaxle | 11 | 8 |
|
|
|
| Valve cover | Oil strainer to Valve body | 11 | 8 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Differential | Front differential case to Front differential ring gear | 95 | 70 |
|
|
|
| Differential | Differential gear lube apply tube and No.1 transaxle apply tube clamp to Transaxle housing | 10 | 7 |
|
|
|
| Transmission fluid pan | Transmission oil filler tube subassembly to Automatic transaxle | 6 | 4 |
|
|
|
| Transmission fluid pan | Oil pan to Automatic transaxle | 11 | 8 |
|
|
|
| Transmission mount/case | Transaxle housing to Engine bolt | 64 | 47 | Bolt A |
|
|
| Transmission mount/case | Transaxle housing to Engine bolts | 46 | 34 | Bolts B and C |
|
|
| Transmission mount/case | Transaxle housing to Engine bolt | 44 | 32 | Bolt D |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolts | 29 | 21 | Bolts A and B |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 22 | 16 | Bolt C |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 10 | 7 | Bolt D |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 33 | 24 | Bolt E |
|
|
| Transmission mount/case | Transaxle housing to Transaxle case bolt | 25 | 18 | Bolt F |
|
|
| Transmission mount/case | Upper transaxle case cover to Automatic transaxle | 12 | 9 |
|
|
|
| Transmission mount/case | No.1 transaxle case plug to Transaxle rear cover | 7 | 5 |
|
|
|
| Transmission mount/case | No.1 transaxle case plug to Transaxle case | 7 | 5 |
|
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 19 | 14 | Bolt A |
|
|
| Transmission mount/case | Transaxle rear cover to Transaxle case bolt | 25 | 18 | Other bolt |
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 20 | 15 | Bolt A |
|
|
| Transmission mount/case | Manual detent spring to Transaxle case bolt | 12 | 9 | Bolt B |
|
|
| Torque converter | Torque converter clutch to Drive plate | 41 | 30 |
|
|
|
| Transfer | Control shaft lever to Control shaft | 13 | 10 |
|
|
|
| Transfer | Shift lever assembly to Body | 12 | 9 |
|
|
|
| Transfer | Shift control cable to Control shaft lever | 12 | 9 |
|
|
|
| Transfer | Park/Neutral position switch bolt | 5 | 4 |
|
|
|
| Transfer | Park/Neutral position switch nut | 7 | 5 |
|
|
|
| Transfer | Pawl shaft clamp to Transaxle case | 10 | 7 |
|
|
|
| Transfer | Parking lock pawl bracket to Transaxle case | 20 | 15 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Kevauto - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 3 👎 2
