Toyota Corolla E140 (2007-2013) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Corolla E140 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Corolla E140
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2007 - 2013
- Generation: 10
- Type of van: car
- Model variant: Base
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Oil pan | Drain plug to Automatic transaxle oil pan subassembly | 49 | 36 |
|
||
Oil pump | Oil pump assembly to Transaxle housing | 22 | 16 |
|
||
Oil pump | Stator shaft assembly to Front oil pump body | 10 | 7 |
|
||
Engine mounts | Engine mounting bracket LH to Automatic transaxle | 52 | 38 |
|
||
Engine mounts | Front engine mounting bracket to Automatic transaxle | 64 | 47 |
|
||
Engine mounts | Rear engine mounting bracket to Automatic transaxle | 45 | 33 | TMC made, Silver colored bolt |
|
|
Engine mounts | Rear engine mounting bracket to Automatic transaxle | 64 | 47 | TMC made, Black colored bolt |
|
|
Engine mounts | Rear engine mounting bracket to Automatic transaxle | 45 | 33 | Except TMC made |
|
|
Sensor | Speed sensor to Automatic transaxle | 5 | 4 |
|
||
Fuel/Oil cooler | Oil cooler tube to Transmission oil filler tube subassembly | 12 | 9 |
|
||
Fuel/Oil cooler | Oil cooler tube union to Automatic transaxle | 27 | 20 |
|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Differential | Differential case to Front differential ring gear | 88 | 65 |
|
||
Transmission fluid pan | Transmission oil filler tube subassembly to Automatic transaxle | 6 | 4 |
|
||
Transmission fluid pan | Automatic transaxle oil pan subassembly to Automatic transaxle case | 8 | 6 |
|
||
Transmission mount/case | Transaxle housing to Transaxle case bolt | 29 | 21 | Bolt A |
|
|
Transmission mount/case | Transaxle housing to Transaxle case bolt | 22 | 16 | Bolt B |
|
|
Transmission mount/case | Transmission valve body assembly to Automatic transaxle | 11 | 8 |
|
||
Transmission mount/case | No.1 transaxle case plug to Automatic transaxle | 7 | 5 |
|
||
Transmission mount/case | Rear transaxle cover assembly to Transaxle case | 25 | 18 |
|
||
Transmission mount/case | Rear transaxle cover plug to Rear transaxle cover | 7 | 5 |
|
||
Transmission mount/case | Manual detent spring subassembly to Transmission valve body assembly | 11 | 8 |
|
||
Torque converter | Torque converter set bolt to Drive plate | 28 | 21 |
|
||
Transfer | Shift lever assembly to Body | 12 | 9 |
|
||
Transfer | Park/Neutral position switch assembly to Automatic transaxle | 5 | 4 |
|
||
Transfer | Lock plate to Park/Neutral position switch assembly | 7 | 5 |
|
||
Transfer | Parking lock pawl bracket to Transaxle case | 20 | 15 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 2