Toyota Hilux 7 (2004-2015) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Hilux 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Hilux 7
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 20 | 15 |
|
||
Wheels | Front wheel | 152 | 112 | Steel type |
|
|
Wheels | Front wheel | 132 | 97 | Aluminium type |
|
|
Wheels | Front wheel | 105 | 77 |
|
||
Wheels | Rear wheel | 152 | 112 | Steel type |
|
|
Wheels | Rear wheel | 121 | 89 | Aluminium type |
|
|
Wheels | Rear wheel | 105 | 77 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2015
- Generation: 7
- Type of van: pickup
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheel hub assembly | Front axle hub assembly lock nut | 235 | 173 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Tie rod end | Steering knuckle to Tie rod end | 91 | 67 |
|
||
Steering knuckle | Steering knuckle to Front axle with ABS rotor bearing assembly | 80 | 59 |
|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Disc brake | Front disc brake cylinder assembly to Steering knuckle | 122 | 90 |
|
||
Disc brake | Front No.1 wheel cylinder tube to Disc brake cylinder assembly | 14 | 10 | With SST |
|
|
Disc brake | Front No.1 wheel cylinder tube to Disc brake cylinder assembly | 15 | 11 | Without SST |
|
|
Disc brake | Rear wheel brake cylinder assembly to Backing plate | 12 | 9 |
|
||
Disc brake | Front disc brake bleeder plug | 11 | 8 |
|
||
Disc brake | Rear bleeder plug | 10 | 7 |
|
||
Brake line | Disc brake caliper to Brake tube | 14 | 10 | With SST |
|
|
Brake line | Disc brake caliper to Brake tube | 15 | 11 | Without SST |
|
|
Brake line | Front brake tube bracket set bolt | 29 | 21 |
|
||
Parking brake | Parking brake equalizer to Body | 26 | 19 |
|
||
Parking brake | No.1 parking brake cable assembly to Body | 5 | 4 | Bolt A |
|
|
Parking brake | No.2 parking brake cable assembly to Body | 26 | 19 | Bolt A |
|
|
Parking brake | No.2 parking brake cable assembly to Body | 14 | 10 | Bolt C |
|
|
Parking brake | No.3 parking brake cable assembly to Body | 26 | 19 | Bolt A and nut B |
|
|
Parking brake | No.3 parking brake cable assembly to Body | 14 | 10 | Bolt D |
|
|
Parking brake | No.2 parking brake cable assembly to Backing plate | 9 | 7 |
|
||
Parking brake | No.3 parking brake cable assembly to Backing plate | 9 | 7 |
|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Wheels | Front wheel | 105 | 77 |
|
||
Wheels | Rear wheel | 105 | 77 |
|
||
Sway bar links/Stabilizer links | Steering knuckle to Stabilizer link | 70 | 52 |
|
||
Control arm | Steering knuckle to Lower arm assembly | 160 | 118 |
|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 4