Toyota Hilux 7 (2004-2015) Torque Spec Settings
Below you'll find the tightening torques for the Toyota Hilux 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Hilux 7
Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transmission fluid pan | Drain plug | 20 | 15 |
|
||
Wheels | Front wheel | 152 | 112 | Steel type |
|
|
Wheels | Front wheel | 132 | 97 | Aluminium type |
|
|
Wheels | Front wheel | 105 | 77 |
|
||
Wheels | Rear wheel | 152 | 112 | Steel type |
|
|
Wheels | Rear wheel | 121 | 89 | Aluminium type |
|
|
Wheels | Rear wheel | 105 | 77 |
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2015
- Generation: 7
- Type of van: pickup
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
drivetrain torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
---|---|---|---|---|---|---|
Transfer | Transfer assembly to Transmission assembly | 24 | 18 |
|
||
Transfer | Lower transfer case protector to Transfer assembly | 18 | 13 |
|
||
Transfer | No.1 transfer case plug (filler and drain) to Transfer assembly | 37 | 27 |
|
||
Transfer | Transfer case plug to Front transfer case | 19 | 14 |
|
||
Transfer | Transfer control shift lever retainer subassembly to Front transfer case | 18 | 13 |
|
||
Transfer | Transfer case cover subassembly to Front transfer case | 18 | 13 |
|
||
Transfer | Transfer bearing retainer subassembly to Front transfer case | 12 | 9 |
|
||
Transfer | Transfer indicator switch to Front transfer case | 37 | 27 |
|
||
Transfer | Transfer oil pump body subassembly to Front transfer case | 8 | 6 |
|
||
Transfer | Transfer oil separator subassembly to Front transfer case | 8 | 6 |
|
||
Transfer | Rear transfer case to Front transfer case | 28 | 21 |
|
||
Transfer | Transfer extension housing subassembly to Rear transfer case | 12 | 9 |
|
||
Transfer | Transfer output shaft companion flange (front and rear) | 118 | 87 |
|
steering torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
exhaust torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
brakes torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
suspension torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
general torque settings
Save to email ✉️Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
---|
Did you find the answer to your specific question?
👍 3 👎 4