Toyota Hilux 7 (2004-2015) Torque Spec Settings
By M 93 - Own work, CC BY-SA 3.0
Below you'll find the tightening torques for the Toyota Hilux 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Hilux 7
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Wheels | Front wheel | 152 | 112 | Steel type |
|
|
| Wheels | Front wheel | 132 | 97 | Aluminium type |
|
|
| Wheels | Front wheel | 105 | 77 |
|
|
|
| Wheels | Rear wheel | 152 | 112 | Steel type |
|
|
| Wheels | Rear wheel | 121 | 89 | Aluminium type |
|
|
| Wheels | Rear wheel | 105 | 77 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2015
- Generation: 7
- Type of van: pickup
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Oil pump | Oil pump to Transmission case | 21 | 15 |
|
|
|
| Oil pump | Oil pump body to Stator shaft assembly | 11 | 8 |
|
|
|
| Sensor | Automatic transmission temperature sensor to Oil cooler tube union | 15 | 11 |
|
|
|
| Sensor | ATF temperature sensor to Transmission valve body assembly | 10 | 7 |
|
|
|
| Starter | Starter assembly to Automatic transmission | 68 | 50 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp | 5 | 4 |
|
|
|
| Fuel/Oil cooler | Oil cooler tube clamp to Automatic transmission | 12 | 9 |
|
|
|
| Fuel/Oil cooler | Oil cooler inlet tube no.1 to Automatic transmission | 34 | 25 |
|
|
|
| Fuel/Oil cooler | Oil cooler outlet tube no.1 to Automatic transmission | 34 | 25 |
|
|
|
| Valve cover | Oil strainer to Valve body | 10 | 7 |
|
|
|
| Valve cover | Valve body to Transmission case | 11 | 8 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Overflow plug | 20 | 15 |
|
|
|
| Transmission fluid pan | Oil filler tube | 12 | 9 |
|
|
|
| Transmission fluid pan | Oil pan to Transmission case | 4 | 3 |
|
|
|
| Transmission mount/case | Transmission control cable to Automatic transmission | 14 | 10 |
|
|
|
| Transmission mount/case | Transmission control cable to Body | 6 | 4 |
|
|
|
| Transmission mount/case | Transmission control cable bracket no.1 to Automatic transmission | 28 | 21 |
|
|
|
| Transmission mount/case | Automatic transmission to Engine | 71 | 52 |
|
|
|
| Transmission mount/case | Stiffener plate to Automatic transmission | 71 | 52 |
|
|
|
| Transmission mount/case | Transmission housing to Transmission case bolt | 34 | 25 | Bolt length 14mm |
|
|
| Transmission mount/case | Transmission housing to Transmission case bolt | 57 | 42 | Bolt length 17mm |
|
|
| Transmission mount/case | Transaxle case cover upper to Transmission case | 5 | 4 |
|
|
|
| Transmission mount/case | Transmission oil cooler to Transmission case | 5 | 4 |
|
|
|
| Transmission mount/case | Extension housing assembly to Transmission case | 34 | 25 |
|
|
|
| Transmission mount/case | Transmission valve body assembly to Transmission case | 11 | 8 |
|
|
|
| Transmission mount/case | Parking lock pawl bracket to Transmission case | 7 | 5 |
|
|
|
| Transmission mount/case | Detent spring to Transmission valve body assembly | 10 | 7 |
|
|
|
| Torque converter | Torque converter clutch to Drive plate | 41 | 30 |
|
|
|
| Transfer | Control shaft lever to Automatic transmission | 16 | 12 |
|
|
|
| Transfer | Park/Neutral position switch to Automatic transmission bolt | 13 | 10 |
|
|
|
| Transfer | Park/Neutral position switch to Automatic transmission nut | 7 | 5 |
|
|
|
| Transfer | Floor shift assembly to Body | 14 | 10 |
|
|
|
| Transfer | Shift solenoid valve S1 and S2 to Valve body | 6 | 4 |
|
|
|
| Transfer | Shift solenoid valve SL to Valve body | 10 | 7 |
|
|
|
| Transfer | Shift solenoid valve SLT to Valve body | 6 | 4 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust pipe assembly front to Exhaust manifold | 43 | 32 |
|
|
|
| Exhaust manifold | Exhaust pipe assembly front to Exhaust pipe | 48 | 35 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Vauxford - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 5 👎 5
