Toyota Hilux 7 (2004-2015) Torque Spec Settings
By M 93 - Own work, CC BY-SA 3.0
Below you'll find the tightening torques for the Toyota Hilux 7 in both Nm and ft/lbs. The first table contains the most-used torque settings. The tables after it contain all torque spec values I could find.
Most-used torque specs for Toyota Hilux 7
| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Drain plug | 20 | 15 |
|
|
|
| Wheels | Front wheel | 152 | 112 | Steel type |
|
|
| Wheels | Front wheel | 132 | 97 | Aluminium type |
|
|
| Wheels | Front wheel | 105 | 77 |
|
|
|
| Wheels | Rear wheel | 152 | 112 | Steel type |
|
|
| Wheels | Rear wheel | 121 | 89 | Aluminium type |
|
|
| Wheels | Rear wheel | 105 | 77 |
|
|
To make sure these are the correct tightening torque values, you can use the data below to verify this is the right model.
Are these torque settings right for you?
- Production years: 2004 - 2015
- Generation: 7
- Type of van: pickup
- Model variant: Base
- Also known as:
All Torque Settings in Tables
engine torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Starter | Starter assembly to Manual transmission unit assembly | 58 | 43 |
|
|
|
| Starter | Starter assembly to Manual transmission unit assembly | 68 | 50 |
|
|
|
| Starter | Starter assembly to Manual transmission unit assembly | 37 | 27 |
|
|
drivetrain torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Transmission fluid pan | Filler and drain plugs | 37 | 27 |
|
|
|
| Transmission mount/case | Manual transmission unit assembly to Engine | 72 | 53 |
|
|
|
| Transmission mount/case | Stiffener assembly to Manual transmission unit assembly | 72 | 53 |
|
|
|
| Transmission mount/case | Manual transmission case to Extension housing | 37 | 27 |
|
|
|
| Transmission mount/case | Shift detent ball spring seat no.1 to Intermediate plate | 19 | 14 |
|
|
|
| Transmission mount/case | Manual transmission case to Backup lamp switch assembly | 44 | 32 |
|
|
|
| Transmission mount/case | Manual transmission to Clutch housing | 36 | 27 |
|
|
|
| Transmission mount/case | Manual transmission case to Release form support | 47 | 35 |
|
|
|
| Transmission mount/case | Manual transmission case to Clutch release cylinder | 12 | 9 |
|
|
|
| Transfer | Control shift lever retainer to Extension housing | 18 | 13 |
|
|
|
| Transfer | Gear shift form shaft no.1 to Gear shift fork no.1 | 20 | 15 |
|
|
|
| Transfer | Gear shift form shaft no.2 to Gear shift fork no.2 | 20 | 15 |
|
|
steering torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
exhaust torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to | |
|---|---|---|---|---|---|---|
| Exhaust manifold | Exhaust pipe assembly front to Exhaust manifold | 43 | 32 |
|
|
|
| Exhaust manifold | Exhaust pipe assembly front to Exhaust tail pipe | 48 | 35 |
|
|
brakes torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
suspension torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
general torque settings
Save to email ✉️| Part | Description | Torque (Nm) | Torque (ft/lbs) | Remarks | Applies to |
|---|
By Vauxford - Own work, CC BY-SA 4.0
Did you find the answer to your specific question?
👍 3 👎 4
